Abstract:<p>With the rapid development of the machinery industry, bearing materials with better tribological properties are demanded. Al alloys containing Erbium (Er) and Zirconium (Zr) have better comprehensive performance, whose tribological properties have hardly been reported before. In this work, dry sliding wear tests were performed on the Al–Sn and Al–Sn–Er–Zr alloys in two different annealing states to study the effect of trace Er, Zr on the tribological properties of the Al–Sn alloys. The Al–Sn–Er–Zr alloys showed better wear resistance than the Al–Sn alloys, which was mainly due to the higher hardness and strength of the Al–Sn–Er–Zr alloys. The wear losses of the alloys annealed at 375 °C for 100 h at the load of 70 N were significantly lower than those of the alloys annealed at 300 °C for 4 h. The wear coefficient <span class="math"><math>K</math></span> of the alloys annealed at 375 °C for 100 h decreased with the increasing load. The Al–Sn–Er–Zr alloys showed smoother worn surfaces than the Al–Sn alloys. With the load increasing, the wear mechanism changed from abrasive wear, mild adhesive wear and slight delamination wear to severe adhesive wear and delamination wear. The wear scars of different samples under the same load were similar, indicating that the addition of trace Er, Zr and annealing process did not change the wear mechanism. All samples experienced cracks and voids in the tribolayers. And oxygen accumulated in these defects. Most wear debris were lamellar, which was related to the adhesive wear and consist with the delamination theory.</p>

Repassivation and dry sliding wear behavior of equiatomic medium entropy TiZr (Hf, Ta, Nb) alloys

Corrosion and tribocorrosion behavior of equiatomic refractory medium entropy TiZr(Hf, Ta, Nb) alloys in chloride solutions

Tribological Behavior of an Amorphous Zr20Ti20Cu20Ni20Be20 High-Entropy Alloy Studied Using a Nanoscratch Technique

Contributions of the Particulate Reinforcement to Dry Sliding Wear Resistance of Rapidly Solidified Al-Ti Alloys

Enhanced wear-resistance of TiZrHfNb refractory high entropy alloys meditated by subsurface instabilities

Dislocation patterning in the TiZrVTa refractory high-entropy alloy under tribological loading

Effects of the Environment and Temperature on the Tribological Behavior of TiZrHfNbTa Refractory High-Entropy Alloy

Dry sliding wear of MA/PM Al-10Ti alloy

Dry sliding wear of microalloyed Er-containing Al–10Sn–4Si–1Cu alloy

Effect of interstitial oxygen /nitrogen on mechanical and wear properties of TiZrHfNb refractory high-entropy alloy

Sliding and Fretting Wear Behavior of Biomedical Ultrafine-Grained TiNbZrTaFe/Si Alloys in Simulated Physiological Solution

Friction and wear behavior of a precipitation-hardened equiatomic FeCrNi medium entropy alloy unraveled by molecular dynamics simulation

Effect of Ti on the wear behavior of AlCoCrFeNi high-entropy alloy during unidirectional and bi-directional sliding wear processes

The determining role of Al addition on tribology properties and oxidation behavior at elevated temperatures of TiZrHfNb refractory high-entropy alloy

Effects of Zr Content on the Microstructure and Performance of TiMoNbZrx High-Entropy Alloys

Dry‐Sliding Wear Response of MoTaWNbV High Entropy Alloy

Dry Friction Characteristics of Ti-6Al-4V Alloy under High Sliding Velocity

Effect of Heat Treatment on the Frictional Wear Properties of Zr-Based Amorphous Alloy

Tribological behaviors of nanotwinned Al alloys

Atomistic simulation of tribology behaviors of Ti-based FeCoNiTi high entropy alloy coating during nanoscratching

Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature