Abstract:Nanocrystalline Ce–Fe–B alloys exhibit potential utilization for low-cost permanent magnets, however, the preparation of anisotropic magnets with satisfactory magnetic properties remains a challenge. CeFe 2 Laves phase with high melting point that forms in the Ce-rich Ce–Fe–B magnets has been considered as the reason to be detrimental to its hot-working process and magnetic performance. Herein, we report the significant effects of adding Ga to nanocrystalline melt-spun Ce 17 Fe 78-x B 6 Ga x alloys on suppressing the CeFe 2 phase and enhancing coercivity. The x = 2.0 alloy is identified as the optimal precursor for preparing anisotropic hot-deformed magnet due to its lower CeFe 2 phase content (5.7 wt.%), considerably less than that of the ternary Ce–Fe–B alloy (17.6 wt.%). The congruent alignment and platelet-shaped grain characteristics are obtained in the Ga-added hot-deformed magnet, indicating an enhanced anisotropy that results in an improved remanence from 4.2 kGs to 5.9 kGs. The development of such texture can be ascribed to the reduced amount of CeFe 2 phase, allowing the formation of Ce-rich grain boundary (GB) phase, which is necessary to induce grain alignment during hot deformation process. Two types of Ga-containing GB phases are found in the Ga-added magnet, namely typical Ce-rich/Fe-lean GB phase and Ce 6 Fe 13 Ga phase. The uniformly distributed Ce-rich GB phases surrounding the main grains helps to magnetic isolate the Ce 2 Fe 14 B grains and thus enhance the coercivity, as verified by detailed microstructural characterizations combined with micromagnetic simulation. The work offers a potential way to realize anisotropy in Ce–Fe–B magnets and inspires further exploration of high abundance Ce-based magnets.

Enhanced magnetic properties and anisotropy in hot-deformed Ce–Fe–B magnets by suppressing CeFe 2 phase with Ga addition

Suppressing laves phase and overcoming magnetic properties tradeoff in nanostructured (Ce,La,Y)–Fe–B alloys via Ge substitution

Enhanced Hard-Magnetic Properties and Thermal Stability of Nanocrystalline Ce-rich Ce-Fe-B Alloys by Combining La Substitution and Si Addition

Structural evolution and improvement of magnetic properties of hot-deformed CeFeB magnets with Nd70Cu30 addition

Strategy to improve magnetic property of sintered (Nd, Ce)–Fe–B magnets: Moderate replacement of cerium with lanthanum

High Cerium content Fe‐Ce‐Nd‐B sintered magnets with high coercivity

Maximizing the Hard Magnetic Properties of Melt-Spun Ce–La–Fe–B Alloys

Clarifying the Basic Phase Structure and Magnetic Behavior of Directly Quenched (ce,la)2fe14b Alloys with Various Ce/La Ratios

Preparation of Hot Worked Dual-Main Phase Nd-Ce-Fe-B Magnets and Properties Modification by Grain Boundary Diffusion

Comparison of (pr, Nd)H Grain Boundary Restructuring and Diffusion on the Magnetic Properties of Nd–La–Ce–Fe–B Sintered Magnet

Microstructure, magnetic anisotropy, plastic deformation, and magnetic properties: The role of PrCu in hot deformed CeFeB magnets

Effect of Ga Addition on the Valence State of Ce and Magnetic Properties of Melt-Spun Ce17fe78-Xb6gax (X=0-1.0) Ribbons

Coercivity Enhancement of Nanocrystalline Ce-based Magnets Utilizing Simplified One-Step Hot Deformation Process

Coercivity enhancement of Nd-La-Ce-Fe-B sintered magnets: Synergistic effects of grain boundary regulation and chemical heterogeneity

Grain Boundary Construction and Properties Enhancement for Hot Deformed (Ce,la,y)-Fe-b Magnet by a Two-Step Diffusion Process

Textured (Ce,La,Y)–Fe–B permanent magnets by hot deformation

Optimization of the core-shell structures and grain boundary to improve the coercivity of high Ce-content Nd-Ce-Fe-B magnets

Strategy and mechanism for substantially enhanced coercivity in multi-main-phase Nd-La-Ce-Fe-B sintered magnets

Grain boundary modification of multi-main-phase Nd0.7(La, Ce)0.3-Fe-B magnet towards 2 T coercivity

Coercivity Enhancement for Nd-La-Ce-Fe-B Sintered Magnets by Tailoring La and Ce Distributions

Study on Ce2Fe14B-based sintered magnets with Ce/RE> 80