Abstract:The rapidly increasing atmospheric CO2 concentration has driven research into the development of cost- and energy-efficient materials and processes for the direct air capture of CO2 (DAC). Solid-supported amine materials can give high CO2 uptakes and acceptable sorption kinetics, but they are generally prepared in powder forms that are likely not practically deployable in large-scale operations due to significant pressure drops associated with packed-bed gas-solid contactors. To this end, the development of effective gas-solid contactors for CO2 capture technologies is important to allow processing high flow rates of gas with low-pressure drops and high mass transfer rates. In this study, we demonstrate new laminate-supported amine CO2 sorbents based on the impregnation of low-molecular-weight, branched poly(ethyleneimine) (PEI) into an expanded poly(tetrafluoroethylene) (ePTFE) sheet matrix containing embedded silica particles to form free-standing sheets amenable to incorporation into structured gas-solid contactors. The free-standing sheets are functionalized with PEI using a highly scalable wet impregnation method. This method allowed controllable PEI distribution and enough porosity retained inside the sheets to enable practical CO2 capacities ranging from 0.4 to 1.6 mmol CO2/gsorbent under dry conditions. Reversible CO2 capacities are achieved under both dry and humid temperature swing cycles, indicating promising material stability. The specific thermal energy requirement for the regeneration based on the measured CO2 and water capacities is 287 kJ/mol CO2, where the molar ratio of water to CO2 of 3.1 is achieved using hydrophobic materials. This is the lowest molar ratio among published DAC sorbents. A larger laminate module is tested under conditions closer to larger-scale operations (linear velocities 0.03, 0.05, and 0.1 m/sec) and demonstrates a stable capacity of 0.80 CO2/gsorbent over five cycles of CO2 adsorption and steam regeneration. The PEI-impregnated ePTFE/silica composite sorbent/contactors demonstrate promising DAC performance derived from the amine-filled silica particles contained in hydrophobic ePTFE domains to reduce water sorption and its concomitant regeneration energy penalty.

Preparation of "dry water"-type liquid marbles with enhanced mechanical stability and CO 2 capture performance

Liquid Metal Hydrothermal Rheological Modification Method for High Performance Gallium‐Coated Carbon Microparticle Composites

Using Hybrid Coating to Fabricate Highly Stable and Expandable Transparent Liquid Marbles

Liquid marble-derived solid-liquid hybrid superparticles for CO2 capture

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Fabrication of Stable Monolayer Liquid Marbles with Reduced Particle Coverage and Locomotion on Hydrophilic Surface

Enhancing water transport performance of gas diffusion layers through coupling manipulation of pore structure and hydrophobicity

pH-Responsive Liquid Marbles Stabilized with Chitosan-Stearic Acid-Conjugated Particles

Mesoporous Dendritic Fibrous Nanosilica (DFNS) Stimulating Mix Matrix Membranes Towards Superior CO2 Capture

Direct Air Capture of CO2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents

Superhydrophobic Ceramic Membrane Coupled with a Biphasic Solvent for Efficient CO2 Capture

Improved CO 2 separation performance of mixed matrix membranes via expanded layer double hydroxides and methanol post-treatment

Enhancing DMC Production from CO2: Tuning Oxygen Vacancies and In Situ Water Removal

Robust Cellulose-Based Hydrogel Marbles with Excellent Stability for Gas Sensing.

Efficient CO(2)capture from ambient air with amine-functionalized Mg-Al mixed metal oxides

Facile Synthesis of Structured Adsorbent with Enhanced Hydrophobicity and Low Energy Consumption for CO2 Capture from the Air

High-purity H<sub>2</sub> production by sorption-enhanced water gas shift on a K<sub>2</sub>CO<sub>3</sub>-promoted Cu/MgO-Al<sub>2</sub>O<sub>3</sub> difunctional material

Progress in Liquid Marbles

Core -shell magnetic nanoparticles for substrate -Independent super- amphiphobic surfaces and mechanochemically robust liquid marbles

Microcapsules fabricated from liquid marbles stabilized with latex particles

Performance Evaluation of a Novel CO2 Absorbent: Dimethyl Carbonate