Abstract:Phase change materials (PCMs) play a crucial role as thermal interface materials (TIMs) because of their excellent thermal storage capacity. The solid-liquid phase change materials (SLPCMs) are usually encapsulated in the form-stable supporting materials to avoid leakage. However, plasticity is needed to ensure tight adhesion with the thermal dissipation surface of TIMs, which challenges the SLPCMs encapsulation requirement. Herein, we designed an epoxy resin-based gel PCM by using magnolol bifunctional epoxy resin (DGEM) with crystallizable side chains and 1-(3-aminopropyl) imidazole (IM) as both the extender and curing agent. IM facilitates smart balancing of the chain extension and cross-linking structure to endow the TIMs with both form-stability and surface adhesion via controllable slight cross-linking. Its preparation process is facile, and the as-prepared epoxy resin gel is stable in service. A latent heat storage capacity of 73.8 J g(-1) and bonding strengths of 2.9, 2.9, 1.6, and 1.4 MPa for wood, aluminum, glass, and steel are achieved, respectively. When the temperature rises above the melting point (T m) of PCM, it shows excellent segment migration and surface adhesion in the gel state, which makes it easily adhere to the heat dissipation surface and fully fill the rough surface gap. Its reversible crystallization can store excessive heat energy and release latent heat so that the device temperature is maintained within a relatively safe range. In addition, it can be easily recovered from the bonding substrates once heated above the T m. Its installation and recovery processes are as efficient as hot melt and pressure sensitive adhesives. This study is of great significance for the preparation and application of PCMs.

Preparation of Phase Change Melt Marbles with High Thermal Stability by Spontaneous Shrinkage and Encapsulation

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Leak-free and shape-stabilized phase change composites with radial spherical SiO2 scaffolds for thermal management

Micro-encapsulation of a low-melting-point alloy phase change material and its application in electronic thermal management

Synthesis and Characterization of Mixed Alkanes Microcapsules with Phase Change Temperature below Ice Point for Cryogenic Thermal Energy Storage

Series of solid-solid phase change materials with ultra-high thermal stability and controllable phase change temperature: kilogram-leveled preparation and application investigation

Preparation and Characterization of Novel MicroPCMs (microencapsulated Phase-Change Materials) with Hybrid Shells Via the Polymerization of Two Alkoxy Silanes

Macro-encapsulation and characterization of chloride based inorganic Phase change materials for high temperature thermal energy storage systems

Thermo-Mechanical Analysis of Ceramic Encapsulated Phase-Change-Material (pcm) Particles

Use of Low Melting Point Metals and Alloys (Tm < 420 °C) as Phase Change Materials: A Review

Novel Sodium Chloride/Aluminum Oxide Powder-Composite Structure with High Shape-Retention Performance for the Encapsulation of a High-Temperature Phase-Change Material

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage

Morphology, Structure and Thermal Stability of Microencapsulated Phase Change Material with Copolymer Shell

Epoxy Resin-Based Gel Phase Change Material for Strong Interface Bonding and Interface Thermal Management

Diatomite: A Promising Natural Candidate As Carrier Material for Low, Middle and High Temperature Phase Change Material

Fabrication and Characterization of a Novel Polyurethane Microencapsulated Phase Change Material for Thermal Energy Storage

Optimization of a silicon-based microencapsulation technology of phase change material without organic solvents

Preparation and Thermal Reliabilities of Microencapsulated Phase Change Materials with Binary Cores and Acrylate-Based Polymer Shells

Preparation And Thermal Properties Of Microencapsulated Phase Change Material For Enhancing Fluid Flow Heat Transfer

Experimental study on a functional microencapsulated phase change material for thermal management