Abstract:Considering the increasing need for optimal use of water resources, using types of waste water instead of part of the water for making concrete and also reducing the use of potable water in concrete is particularly important, especially in developing countries. Accordingly, this study aimed to investigate and reinforce using greywater as a potential alternative to mixing water in concrete. The specimens' fresh, hardened, and durable properties from 14 concrete mix designs containing six mixing water types, three natural zeolite levels (0, 10, and 20%), and two silica fume levels (0 and 8%) were tested to achieve that. Mixing waters in this study consisted of distilled water, raw greywater, diluted greywater (50% greywater, 50% distilled water), simulations of greywater's salt and organic pollutants, and synthetic greywater. The results showed that raw greywater reduced average compressive strength by 8%, while diluted greywater caused a 1.5% increase instead. Mixing water standards requirements were satisfied on both raw and diluted greywater cases. The results also showed that the impact of greywater on the durability properties of concrete was non-critical in most cases, while diluted greywater, even slightly (4%), improved bulk electrical resistance (RCPT). The test results of synthetic waters showed that reducing chemically active salts and/or organic pollution in greywater can effectively increase the performance of the produced concrete. Using 8% silica fume as cement replacement improved the compressive strength of greywater-made concrete by up to 16% and reduced the cracks and porosity of the specimens based on SEM images. On the other hand, using 20% natural zeolite as cement replacement increased surface (using Wenner probes) and bulk chloride ion penetration by 36 and 78%, respectively. Based on these results, silica fume and natural zeolite replacement are impressive tools to reinforce greywater-made green concrete so that it can properly rival and even replace regular concrete even when using more polluted greywater. Furthermore, these replacements can be great potential alternatives to wastewater dilution or treatments.

Reliability of using secondary and tertiary treated wastewater in concrete mixing and curing

Effect on Compressive Strength of Concrete Using Treated Waste Water for Mixing and Curing of Concrete

Development of Self-Compacting Concrete using Composite Cement with Partial Replacement of Potable Water with Treated Wastewater

Eco-friendly concrete: Combining treated wastewater and recycled aggregates

Workability, mechanical, durability, and microstructural investigation of sustainable concrete utilizing secondary treated wastewater, fly ash, and sodium nitrite

Sustainable concrete Production: Incorporating recycled wastewater as a green building material

The effect of using treated domestic wastewater with different pHs on workability, mechanical, and durability properties of self-compacting concrete

Evaluation of Water Quality Impact on the Compressive Strength of Concrete

The effect of chemical oxygen demand of domestic wastewater on workability, mechanical, and durability of self- compacting concrete

Investigating the Appropriate Quality of Greywater for Usage in the Eco-friendly Concrete Mixing

STRENGTH, SHRINKAGE, AND PERMEABILITY PERFORMANCE OF SEAWATER CONCRETE

Development of sustainable concrete incorporating seawater: A critical review on cement hydration, microstructure and mechanical strength

Effect of Seawater on Hydration and Sulfate Resistance of Noncement Mortars

Durability and mechanism of high-salt resistance concrete exposed to sewage-contaminated seawater

Strength Development of Seawater Mixed and Cured Concrete with Various Replacement Ratios of Fly Ash

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

Durability of concrete containing recycled concrete coarse and fine aggregates and milled waste glass in magnesium sulfate environment

Feasibility of using Waste Brine/Seawater and Sea Sand for the Production of Concrete: An Experimental Investigation from Mechanical Properties and Durability Perspectives

Assessing and Reinforcing Properties of Greywater-made Green Concrete Using Pozzolanic Materials

Concrete Mix Strength and Permeability with Various Supplementary Cementitious Materials

Quality Characteristics of Sustainable High-Performance Concrete Formulated from Binary, Ternary, and Quaternary Supplementary Cementitious Materials Under Various Curing Conditions