Abstract:The utilization of recycled concrete and glass aggregates in concrete production has emerged as a highly promising method to significantly increase the recycling rate of waste materials. However, the interaction between alkaline environment and silica present in concrete detrimentally impacts mechanical properties and durability of the concrete due to the significant silica content of the aggregates. This study aims to develop a high‐performance and sustainable concrete to resist alkali–silica reaction (ASR). The study focuses on the use of a blend of ground granulated blast furnace slag (GGBS) and fly ash (FA) as binder materials to mitigate negative effects of the ASR on the mechanical properties and and durability of concrete made with crushed glass sand and coarse recycled concrete aggregate (RCA). Various tests, including ASR expansion, flow, slump, density, compression, three‐point bending, water absorption, and chloride attack, were conducted. Furthermore, microanalysis using scanning electron microscopy and energy‐dispersive x‐ray spectroscopy was performed. Based on the results, it is found that the GGBS is less effective than the FA in reducing the ASR expansion of the concrete, with only 3%, 9%, and 12% decreased expansion as a result of the addition of 20%, 40%, and 70% GGBS to the concrete containing 30% FA, respectively. It is also shown that combining 20% GGBS with 30% FA in the RCA concrete containing glass sand develops similar compressive and flexural strengths and water absorption compared to that containing natural sand. This can be related to the pozzolanic reaction of the FA and GGBS, which helps to retain the alkalis for reducing the crack development and propagation in the concrete. However, further GGBS content leads to a decrease in the strengths and an increase in the water absorption of the concrete. The results of this study point to the significant potential of combining FA and GGBS at an optimum ratio to mitigate the ASR effect on RCA concretes containing crushed glass sand. This approach helps in minimizing the emission of greenhouse gases and other pollutants generated during cement production, thereby mitigating environmental pollution. Additionally, it helps the preservation of natural resources by reducing the depletion of natural sand and coarse aggregate.

Durability of concrete containing recycled concrete coarse and fine aggregates and milled waste glass in magnesium sulfate environment

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Concrete containing recycled concrete coarse aggregate and crushed glass sand: Mitigating the effect of alkali–silica reaction

Durability of Concrete with Partial Replacement of Portland Cement by Incorporating Reactive Magnesium Oxide and Fly Ash

Synergetic recycling of recycled concrete aggregate and waste mussel shell in concrete: Mechanical properties, durability and microstructure

Influence of Magnetized Water on Mechanical Properties and Durability of Recycled Aggregate Concrete

Durability analysis of metakaolin recycled concrete under sulphate dry and wet cycle

Influence of industrial waste and mineral admixtures on durability and sustainability of high-performance concrete

RSM-based optimized mix design of recycled aggregate concrete containing supplementary cementitious materials based on waste generation and global warming potential

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

Influence of Reactive MgO Hydration and Cement Content on C&DW Aggregate Concrete Characteristics

Enhancing Concrete Sustainability: Assessing the Impact of Construction and Demolished Waste Aggregates on Strength and Rapid Chloride Permeability as a Durability Indicator

Effects of Recycled Fine Glass Aggregates on Alkali Silica Reaction and Thermo-Mechanical Behavior of Modified Concrete

Durability of self-compacting concrete containing waste bottle glass and granulated slag

Durability, Microstructure, and Optimization of High-Strength Geopolymer Concrete Incorporating Construction and Demolition Waste

Mechanical and durability characteristics of sustainable concrete modified with partial substitution of waste foundry sand

Enhancing Concrete Performance By Utilizing Crushed Glass And Waste Bottle Plastic Fibers For Improved Strength And Flexural Properties

Experimental Study on Long-Term Mechanical Properties and Durability of Waste Glass Added to OPC Concrete

Durability and In Situ Performance Evaluation of Sustainable Recycled Aggregate Concrete Using Fluorogypsum as Cementitious Binder

Effects of Steel Fibers (SF) and Ground Granulated Blast Furnace Slag (GGBS) on Recycled Aggregate Concrete

Utilization of Waste Glass Micro-particles in Producing Self-Consolidating Concrete Mixtures