Abstract:This article presents an investigation into the effects of natural seawater and sea sand on the behaviour of unconfined and fibre-reinforced polymer-confined concrete. The experimental programme covered compression tests of a large number of standard concrete cylinders, which were prepared from the following four series of concrete: (1) the reference normal concrete, (2) sea-sand concrete, (3) seawater concrete (SwC), and (4) seawater sea-sand concrete. The concrete cylinders were either unconfined or confined with externally wrapped carbon fibre-reinforced polymer jackets to be tested at various ages from the early to the long term. This article presents the results of the first-phase tests, which covered a total of 48 specimens from the four series of concrete, with a half of them tested in the unconfined condition at the ages of 7 and 28 days, and another half tested with either one-ply or two-ply carbon fibre-reinforced polymer jackets at 28 days. The results show that at the ages of 7 and 28 days, the unconfined concrete specimens prepared with seawater and/or sea sand developed a slightly higher compressive strength, as compared to those prepared from normal concrete. When confined with carbon fibre-reinforced polymer jackets, the compressive stress–strain responses of concrete with or without seawater and/or sea sand were very similar. The use of seawater and sea sand did not seem to have significant effects on the compressive strength, ultimate axial strain and stress–strain responses of confined concrete, and the ultimate strain capacity of carbon fibre-reinforced polymer jackets neither. The test results were also compared with the predictions of an existing analysis-oriented stress–strain model for fibre-reinforced polymer-confined concrete. It is shown that the compressive strength, ultimate axial strain, stress–strain responses and dilation behaviour of the carbon fibre-reinforced polymer-confined concrete with or without seawater/sea sand can be reasonably well predicted.

Strength Development of Seawater Mixed and Cured Concrete with Various Replacement Ratios of Fly Ash

Effects of Natural Seawater and Sea Sand on the Compressive Behaviour of Unconfined and Carbon Fibre-Reinforced Polymer-Confined Concrete

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

STRENGTH, SHRINKAGE, AND PERMEABILITY PERFORMANCE OF SEAWATER CONCRETE

The Effect of Mixing and Curing Sea Water on Concrete Strength at Different Ages

Development of sustainable concrete incorporating seawater: A critical review on cement hydration, microstructure and mechanical strength

Experimental and statistical study of mechanical and durability properties of self-compacting concrete using seawater for making and curing

Effect of Seawater on Hydration and Sulfate Resistance of Noncement Mortars

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

A review of recent advances in the science and technology of seawater-mixed concrete

Behavior of Alkali-Activated Fly Ash through Underwater Placement

Investigating the effects of seawater and sea sand aggregates and supplementary cementitious materials on the early shrinkage and crack resistance of concrete

Concrete Mix Strength and Permeability with Various Supplementary Cementitious Materials

Comprehensive evaluation of early-age hydration and compressive strength development in seawater-mixed binary and ternary cementitious systems

Feasibility of using Waste Brine/Seawater and Sea Sand for the Production of Concrete: An Experimental Investigation from Mechanical Properties and Durability Perspectives

Effects of Seawater, NaCl, and [math] Solution Mixing on Hydration Process of Cement Paste

Coal bottom ash as a sustainable supplementary cementitious material for the concrete exposed to seawater

Long-term strength and durability performance of eco-friendly concrete with supplementary cementitious materials

Durability of Steel Reinforced Concrete Using Limestone, Sea Sand and Seawater in Concrete Mix

Rheological properties, compressive strength, hydration products and microstructure of seawater-mixed cement pastes

Utilizing alkali-activated materials as ordinary Portland cement replacement to study the bond performance of fiber-reinforced polymer bars in seawater sea-sand concrete