Abstract:ZrCo1-xCux (x = 0–0.3) alloys for hydrogen isotope storage were prepared via induction levitation melting. The effects of partial substitution of Cu for Co on the microstructure, hydrogen storage properties including hydriding-dehydriding kinetics, thermodynamic characteristics, cycling stability and related mechanism have been systematically investigated. It is found that all synthesized alloy ingots consist of ZrCo main phase, the grain size is further refined but the segregation of Cu element at grain boundary is more serious with the increase of Cu content. The pressure-composition isotherms for dehydrogenation show that both ZrCoH3 and ZrCo0.9Cu0.1H3 hydrides undergo one-step desorption, while ZrCo0.8Cu0.2H3 and ZrCo0.7Cu0.3H3 hydrides experience two-step desorption since a new middle hydride phase of ZrCoH0.8 with CrB-type orthorhombic structure is discovered during their dehydrogenation. This result is proposed to be linked with the changed electronic structure and lattice distortion induced by Cu substitution. To compare their dehydriding kinetics, the apparent activation energies for hydrogen desorption of different hydride phases in the alloys are also calculated systematically, and the value of Ea for hydrogen desorption of ZrCoH3 phase is decreased from 118.02 kJ/mol to 95.90 kJ/mol, 77.98 kJ/mol and 78.65 kJ/mol, respectively. Prominent cycling stabilities of the Cu-substituted alloys are obtained and follow the trend: ZrCo0.8Cu0.2 > ZrCo0.7Cu0.3 > ZrCo0.9Cu0.1 > ZrCo. Specifically, the optimum cycling stable capacity of ZrCo-based alloy is increased from 0.4 wt % to 1.21 wt %. Furthermore, the ZrCo0.8Cu0.2 alloy exhibits further enhanced cycling stability during the cycle by controlling cutoff desorption pressure at 0.253 bar, where only the first-step dehydrogenation happens. Therefore, a new strategy for improving anti-disproportionation performance of ZrCo-based alloys by controlling cutoff desorption pressure is also proposed, which is in favor of the enhanced cycling stability and further application of Cu-substituted ZrCo-based alloys for hydrogen isotope storage and delivery in the International Thermonuclear Experimental Reactor (ITER).

Formation of hydrides in (Ti(1-x)Zr(x))Co(2.00) (0 < x < 1) pseudobinary alloys

Improvement on the Kinetic and Thermodynamic Characteristics of Zr1-xNbxCo (x = 0–0.2) Alloys for Hydrogen Isotope Storage and Delivery

A new strategy for remarkably improving anti-disproportionation performance and cycling stabilities of ZrCo-based hydrogen isotope storage alloys by Cu substitution and controlling cutoff desorption pressure

Effect of Ti Substitution on Hydrogen Storage Properties of Zr1−xTixCo (x = 0, 0.1, 0.2, 0.3) Alloys

An Impact of Hydrogenation Phase Transformation Mechanism on the Cyclic Stabilizing Behavior of Zr0.8Ti0.2Co Alloy for Hydrogen Isotope Handling

Effect of zr content on the microstructures and hydrogen storage properties of (Ti-Cr)(45-x)V55Zrx (x=1 similar to 7) alloys

Effect of Mn Substitution for Co on the Structural, Kinetic, and Thermodynamic Characteristics of ZrCo1−Mn (x=0–0.1) Alloys for Tritium Storage

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

Effect of Zr Content on the Microstructures and Hydrogen Storage Properties of (Ti-Cr)_(45-x)V_(55)Zr_x(x=1～7) Alloys

Investigation of H atoms occupation within ZrCo alloys during hydrogen absorption and desorption

MICROSTRUCTURES AND HYDROGEN STORAGE PROPERTIES OF Ti0.7Zr0.3(Cr1-xVx)2 ALLOYS

Microstructure and hydrogen storage properties of Ti10V84-xFe6Zrx (x = 1-8) alloys

Reversible Hydrogen Storage Properties and Favorable Co-Doping Mechanism of the Metallic Ti and Zr Co-Doped Sodium Aluminum Hydride

Phase Structure and Hydrogen Storage Properties of Ti17cr23v55-Xzr5fex (X=11 Similar to 16) Alloys

Hydrogen storage capabilities of the alloys Fe 0.85Mn 0.15Ti 0.9M 0.1 (M=Zr, V, Ca)

Influence of Zr Addition on the Microstructure and Hydrogenation Kinetics of Ti50-xV25Cr25Zrx (x = 0, 5, 7, and 9) Alloys

Hydrogen Storage Properties of Ti-Cr-Mn-M (M=V, Fe, Ni, Cu) Alloys

Microstructure and hydrogen storage properties of Ti10+xV80-xFe6Zr4 (x=0~15) alloys

Hydrogen storage properties of Zr2Co crystalline and amorphous alloys

The Effect of Cr Content on the Structural and Hydrogen Storage Characteristics of Ti10V80−xFe6Zr4Crx (x = 0–14) Alloys

Addition of Co, Fe to regulate the structure and hydrogen storage property of (TiZr)1.1Cr2.0 alloy