Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

The detection of H2S at room temperature by using individual indium oxide nanowire transistors

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

In Operando Impedance Spectroscopic Analysis on NiO–WO3 Nanorod Heterojunction Random Networks for Room-Temperature H2S Detection

Colloidal Synthesis of Tungsten Oxide Quantum Dots for Sensitive and Selective H2S Gas Detection

Individual Bi2s3 Nanowire-Based Room-Temperature H-2 Sensor

Room Temperature CO Gas Sensing Using Zn-doped In2O3 Single Nanowire Field Effect Transistors

Porous Indium Oxide Nanotubes: Layer-by-Layer Assembly on Carbon-Nanotube Templates and Application for Room-Temperature NH3 Gas Sensors

Switching Effect of p-CuO Nanotube/n-In 2 S 3 Nanosheet Heterostructures for High-Performance Room-Temperature H 2 S Sensing

Room temperature ppb level H2S detection of a single Sb-doped SnO2 nanoribbon device

Fabrication of in-situ grown and Pt-decorated ZnO nanoclusters on new-type FTO electrode for room-temperature detection of low-concentration H2S

High Performance H 2 S Sensor Based on Ordered Fe 2 O 3 /Ti 3 C 2 Nanostructure at Room Temperature

ZnO Nanoparticle-Based MEMS Sensors for H 2 S Detection

A trace ppb-level electrochemical H2S sensor based on ultrathin Pt nanotubes

P-N Heterojunction formation: Metal Sulfide@Metal Oxide Chemiresistor for ppb H 2 S Detection from Exhaled Breath and Food Spoilage at Flexible Room Temperature

ZnO Nanoparticle-Based MEMS Sensors for H2S Detection

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Interface Engineered WS2/ZnS Heterostructures for Sensitive and Reversible NO2 Room Temperature Sensing

Highly sensitive and recoverable room-temperature NO<sub>2</sub> gas detection realized by 2D/0D MoS<sub>2</sub>/ZnS heterostructures with synergistic effects

MoO2 Pump-Enhanced Flexible TiO2 Nanojungle-Based Chemiresistors for Rapid Room-Temperature Detection of H2S at Parts-per-Billion Levels

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Visible Light-Activated Room Temperature NO 2 Gas Sensing Based on the In 2 O 3 @ZnO Heterostructure with a Hollow Microtube Structure