Abstract:In view of extensive application of silver (Ag) paste metallization in the manufacture of electronic devices, it is of great significance to accurately grasp the factors affecting the Ag paste electrode conductivity and the relevant mechanism. Although so far many progresses have been made in the improvement of Ag paste technology, there is still a lack of comprehensive understanding of the microscopic mechanism about Ag paste sintering. Herein, this article tries to relate the conductivity of Ag paste electrodes sintered at different temperatures to those factors, including the morphology, grain size and aggregation state of Ag powder used, as well as the glass frit additive by investigating the microstructure evolution of silver powder (paste) in the sintering process. The results show that these factors determine the grain growth rate and the structure densification during the Ag paste sintering, and thus make an important influence on the electrode conductivity. In general, the larger the grain size and the denser the structure, the greater the electrode conductivity. Therefore, the high electrode conductivity can be achieved by using the flake shaped or spherical Ag powder with a nano-assembly structure. According to the microscopic observations, we suggest that the sintering process should include three stages at temperatures from 300 to 800 °C, i.e. the merging of nanocrystallites in assemblies, interconnection of separated particles, and sintering completion. The influence of glass frit additive on Ag powder sintering is attributed to the dissolution of Ag grain surface by glass melt. This effect may help to increase the grain growth rate and structure densification degree. However, the entry of glass phase matter into Ag grain boundaries would impede the electron transport between grains. Therefore, with increasing the amount of glass phase additive in the Ag paste, the electrode conductivity increased first and then decreased rapidly.

Preparation of conductive silver paste using bimodal particles

Tuning the electrical resistivity of conductive silver paste prepared by blending multi-morphologies and micro-nanometers silver powder

Preparation of Micro-Size Spherical Silver Particles and Their Application in Conductive Silver Paste

Synthesis of 10nm Ag nanoparticle polymer composite pastes for low temperature production of high conductivity films

Preparation of Low Volatile Organic Compounds Silver Paste Containing Ternary Conductive Fillers and Optimization of Their Performances

Low Temperature Sintering of Silver Nanoparticle Paste for Electronic Packaging

Synthesis of Silver Flakes and Their Application as Conductive Filler for Low-Curing-Temperature Silver Pastes

Study on the preparation process and sintering performance of doped nano-silver paste

Low-Temperature Sinterable Cu@Ag Paste with Superior Strength Driven by Pre-Heating Process

Preparation of Nanoparticle and Nanowire Mixed Pastes and Their Low Temperature Sintering

High electrical conductivity and bending resistance of Ag NPs/Ag Flakes composite silver paste are achieved by sintering Ag NPs

Fabrication Of A Hybrid Paste Consisting Of Microscale Ag-Plated Cu Flakes And Nanoscale Ag Particles And Characterization Of Low-Temperature Sintered Hybrid Paste Joints

Microscopic Investigation on Sintering Mechanism of Electronic Silver Paste and Its Effect on Electrical Conductivity of Sintered Electrodes

Investigation of 1-hexanol base silver paste formula for low-temperature sintering

Low-Temperature Sintering of Nanoscale Silver Pastes for High-Performance and Highly-Reliable Device Interconnection

Physical Properties of Paste Synthesized from Wet- and Dry-Processed Silver Powders

High Electrical and Thermal Conductivity of Nano-Ag Paste for Power Electronic Applications

Low temperature-cured electrically conductive pastes for interconnection on electronic devices

Preparation of Micron-Sized Plate-Like Silver Powders Used in Silver Paste by Wet-Chemical Reduction Method