Abstract:Atmospheric-pressure plasma-enhanced spatial atomic layer deposition (PE-s-ALD) is considered a promising technique for high-throughput and low-temperature deposition of ultrathin films for applications where volume and costs are particularly relevant. The number of atmospheric-pressure PE-s-ALD processes developed so far is rather limited, and the fundamental aspects of their growth mechanisms are largely unexplored. This work presents a study of the atmospheric-pressure PE-s-ALD process of Al 2 O 3 using trimethylaluminum [TMA, Al(CH 3 ) 3 ] and Ar–O 2 plasma within the temperature range of 80–200 °C. Thin-film analysis revealed low impurity contents and a decreasing growth-per-cycle (GPC) with increasing temperature. The underlying chemistry of the process was studied with a combination of gas-phase infrared spectroscopy on the exhaust plasma gas and optical emission spectroscopy (OES) on the plasma zone. Among the chemical species formed in the plasma half-cycle, CO 2 , H 2 O, CH 4 , and CH 2 O were identified. The formation of these products confirms that the removal of CH 3 ligands during the plasma half-cycle occurs through two reaction pathways that have a different temperature dependences: (i) combustion reactions initiated by O 2 plasma species and leading to CO 2 and H 2 O formation and (ii) thermal ALD-like reactions initiated by the H 2 O molecules formed in pathway (i) and resulting in CH 4 production. With increasing temperature, the dehydroxylation of OH groups cause less TMA adsorption which leads to less CO 2 and H 2 O from the combustion reactions in the plasma step. At the same time, the higher reactivity of H 2 O at higher temperatures initiates more thermal ALD-like reactions, thus producing relatively more CH 4 . The CH 4 can also undergo further gas-phase reactions leading to the formation of CH 2 O as was theoretically predicted. Another observation is that O 3 , which is naturally produced in the atmospheric-pressure O 2 plasma, decomposes at higher temperatures mainly due to an increase of gas-phase collisions. In addition to the new insights into the growth mechanism of atmospheric-pressure PE-s-ALD of Al 2 O 3 , this work presents a method to study both the surface chemistry during spatial ALD to further extend our fundamental understanding of the method.

Tailored Molybdenum Carbide Properties and Graphitic Nano Layer Formation by Plasma and Ion Energy Control during Plasma Enhanced ALD

Control of Graphene Layer Thickness Grown on Plasma Enhanced Atomic Layer Deposition of Molybdenum Carbide

Highly Exposed NH2 Edge on Fragmented G‐c3n4 Framework with Integrated Molybdenum Atoms for Catalytic CO2 Cycloaddition: DFT and Techno‐Economic Assessment

Metal-organic Chemical Vapor Deposition of Aluminium Oxynitride from Propylamine–dimethylaluminium Hydride and Oxygen: Growth Mode Dependence and Performance Optimization

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

Characterisation and Oxidation Behaviour of Plasma Surface Alloyed on Γ-Tial Alloy

Plasma Enhanced Atomic Layer Deposition of Molybdenum Oxide from Mo(CO)6 and O2 Plasma for 2D Electronic Device Application

Temperature study of atmospheric-pressure plasma-enhanced spatial ALD of Al2O3 using infrared and optical emission spectroscopy

Constructing Conductive MoOx Thin Films by Plasma Enhanced Atomic Layer Deposition

Synthesis, microstructure and properties of MoAlB MAB phase films

Uniform Growth of Sub-5-Nanometer High-κ Dielectrics on MoS2 Using Plasma-Enhanced Atomic Layer Deposition

Surface Microstructure and High Temperature Oxidation Resistance of Thermal Sprayed NiCoCrAlY Bond-Coat Modified by Cathode Plasma Electrolysis

Room Temperature Ion Beam Synthesis of Ultra-Fine Molybdenum Carbide Nanoparticles: Toward a Scalable Fabrication Route for Earth-Abundant Electrodes

Surface and Interfacial Study of Atomic Layer Deposited Al2O3 on MoTe2 and WTe2

Atomic Layer Deposition of Cobalt Carbide Thin Films from Cobalt Amidinate and Hydrogen Plasma

Plasma-assisted atomic layer deposition of transition metals and their carbides

Studying the Atomic Layer Deposition of Molybdenum Oxide and Titanium–Molybdenum Oxide Films Using Quartz Crystal Microbalance

Thermal Atomic Layer Deposition of Silicon Carbonitride: A Density Functional Theory Study

Effect of Thermal Annealing on Phase Structure and Hydrogen Evolution Reaction of Molybdenum Carbide Thin Films Prepared by Co-Sputtering

Atomic Layer Deposition of Metal Oxides on Pristine and Functionalized Graphene