Abstract:As mentioned in Chapter 1, most of the techniques used for speciation analysis of environmental samples are based on the coupling of different analytical steps involving extraction, derivatization, separation and detection. Derivatization of organometallic compounds is often required when the separation is performed by gas chromatography but may also be used after liquid Chromatographic separation. The major advantage of the derivatization step is the separation of the analytes from the matrix which reduces the occurrence of possible interferences during the subsequent analytical steps and particularly at the detection stage. This procedure also allows pre-concentration of the analytes to be achieved either in the solvent or by cryogenic trapping (cryo-condensation).Hydride generation is one derivatization procedure which has been extensively used since its introduction by Holak [1] for the determination of total content of arsenic by flame atomic absorption spectrometry. Hydride generation can be performed on-line or off-line and allows both the determination of organometallic compounds and elements with different oxidation states. This procedure may be applied to the determination of a wide variety of chemical species in environmental samples (water, sediment, biological tissues); hydride generation with NaBH4 can be used for the determination of total contents of elements such as antimony, arsenic, bismuth, germanium, lead, mercury, tin, selenium and tellurium or their species [2], depending upon the exact conditions used.An example of the hydride generation reaction applied to tin speciation is given below: RnSn(4−n)+→NaBH4,H+RnSnH(4−n)+H2withn=1,2,3Rismethyl,ethylorbutylHydride generation conditions, e.g. concentration of the reductant solution (NaBH4), pH and types of acids used, must be selected according to the element determined and the quality of the sample [3], as discussed below. Whereas the advantages of this procedure are well recognized, it is often subject to major drawbacks when difficult matrices are to be analyzed. This chapter aims to give an overview of the advantages and limitations of hydride generation when applied to speciation studies.

Behaviour of the dithiocarbamate complexes of arsenic, antimony, bismuth, mercury, lead, tin and selenium in methanol with a hydride generator

A new continuous hydride generator for the determination of arsenic, Antimony and tin by hybride generation atomic absorption spectrometry

Electrochemical hydride generation for the simultaneous determination of hydride forming elements by inductively coupled plasma-atomic emission spectrometry

Determination of Germanium, Arsenic, Tin, Selenium, and Antimony by Plasma Emission Spectrometry with Hydride Generation and Chromatographic Separation

Simultaneous determination of arsenic, antimony, selenium and tin by gas phase molecular absorption spectrometry after two step hydride generation and preconcentration in a cold trap system

Evaluation of continuous hydride generation combined with helium and argon microwave induced plasmas using a surfatron for atomic emission spectrometric determination of arsenic, antimony and selenium

Chemical interferences in hydride-generation atomic spectrometry

Simultaneous Multi-Elemental Speciation of As, Hg and Pb by Inductively Coupled Plasma Mass Spectrometry Interfaced with High-Performance Liquid Chromatography

Combined generator/separator for continuous hydride generation: application to on-line pre-reduction of arsenic(V) and determination of arsenic in water by atomic emission spectrometry

Direct coupling of continuous hydride generation with microwave plasma torch atomic emission spectrometry for the determination of arsenic, antimony and tin

Simultaneous determination of arsenic and antimony by hydride generation atomic fluorescence spectrometry with dielectric barrier discharge atomizer

L-Cysteine - A Novel Reagent For Hydride Generation Atomic Spectrometry

Speciation of Inorganic and Organic Species of Mercury and Arsenic in Lotus Root Using High Performance Liquid Chromatography with Inductively Coupled Plasma Mass Spectrometric Detection in One Run.

Determination of hydride-forming elements in high purity coppers by inductively coupled plasma atomic emission spectrometry

Automated procedure for the determination of soluble arsenic using hydride generation atomic-absorption spectroscopy

Germanium determination by hydride generation atomic emission spectrometry: simultaneous signal enhancement and interference suppression

19. Hydride generation for speciation analyses using CG/AAS

Application of atmospheric pressure dielectric barrier discharge plasma for the determination of Se, Sb and Sn with atomic absorption spectrometry

Hydride Generation/Condensation System With an Inductively Coupled Argon Plasma Polychromator for Simultaneous Determination of Arsenic, Antimony, Selenium, Lead, Mercury and Tin in Honey

Selective reduction of arsenic species by hydride generation: atomic absorption spectrometry part 1 - reduction media

Sensitive Determination of Arsenic by Photochemical Vapor Generation with Inductively Coupled Plasma Mass Spectrometry: Synergistic Effect from Antimony and Cadmium