Abstract:As mentioned in Chapter 1, most of the techniques used for speciation analysis of environmental samples are based on the coupling of different analytical steps involving extraction, derivatization, separation and detection. Derivatization of organometallic compounds is often required when the separation is performed by gas chromatography but may also be used after liquid Chromatographic separation. The major advantage of the derivatization step is the separation of the analytes from the matrix which reduces the occurrence of possible interferences during the subsequent analytical steps and particularly at the detection stage. This procedure also allows pre-concentration of the analytes to be achieved either in the solvent or by cryogenic trapping (cryo-condensation).Hydride generation is one derivatization procedure which has been extensively used since its introduction by Holak [1] for the determination of total content of arsenic by flame atomic absorption spectrometry. Hydride generation can be performed on-line or off-line and allows both the determination of organometallic compounds and elements with different oxidation states. This procedure may be applied to the determination of a wide variety of chemical species in environmental samples (water, sediment, biological tissues); hydride generation with NaBH4 can be used for the determination of total contents of elements such as antimony, arsenic, bismuth, germanium, lead, mercury, tin, selenium and tellurium or their species [2], depending upon the exact conditions used.An example of the hydride generation reaction applied to tin speciation is given below: RnSn(4−n)+→NaBH4,H+RnSnH(4−n)+H2withn=1,2,3Rismethyl,ethylorbutylHydride generation conditions, e.g. concentration of the reductant solution (NaBH4), pH and types of acids used, must be selected according to the element determined and the quality of the sample [3], as discussed below. Whereas the advantages of this procedure are well recognized, it is often subject to major drawbacks when difficult matrices are to be analyzed. This chapter aims to give an overview of the advantages and limitations of hydride generation when applied to speciation studies.

L-Cysteine - A Novel Reagent For Hydride Generation Atomic Spectrometry

Effect of cysteine on the speciation of arsenic by using hydride generation atomic absorption spectrometry

Cysteine enhancement of the cryogenic trap hydride AAS determination of dissolved arsenic species

A new continuous hydride generator for the determination of arsenic, Antimony and tin by hybride generation atomic absorption spectrometry

Arsenic speciation by cryogenic trap hydride generation atomic absorption spectroscopy: performance enhancement by pre-derivatization

Speciation of antimony(III) and antimony(V) using hydride generation inductively coupled plasma atomic emission spectrometry combined with the rate of pre-reduction of antimony

19. Hydride generation for speciation analyses using CG/AAS

L‐Cysteine Enhanced Hydride Generation for Atomic Fluorescence Spectrometric Determination of Germanium in Geological Samples

Combined generator/separator for continuous hydride generation: application to on-line pre-reduction of arsenic(V) and determination of arsenic in water by atomic emission spectrometry

Photochemical Hydride Generation in Sulfite Medium: Sample Introduction into an Inductively Coupled Plasma Mass Spectrometer for the Determination of Ultratrace Inorganic Arsenic

An improved method for the determination of trace levels of arsenic and antimony in geological materials by automated hydride generation—atomic absorption spectroscopy

Determination of trace amounts of tin by hydride generation direct current plasma atomic emission spectrometry: interference reduction by L-cystine

Arsenic and antimony speciation analysis in copper electrolyte by liquid chromatography coupled to hydride generation atomic fluorescence spectrometry (HPLC-HG-AFS)

Speciation of arsenic by hydride generation–atomic absorption spectrometry (HG–AAS) in hydrochloric acid reaction medium

Selective and sensitive determination of As(III) and tAs in Chinese herbal medicine samples using L-cysteine modified carbon paste electrode-based electrolytic hydride generation and AFS analysis

Electrochemical hydride generation for the simultaneous determination of hydride forming elements by inductively coupled plasma-atomic emission spectrometry

Reduction of interferences in the determination of germanium by hydride generation and atomic emission spectrometry

Off-line separation and determination of inorganic arsenic species in natural water by high resolution inductively coupled plasma mass spectrometry with hydride generation combined with reaction of arsenic(V) and L-cysteine

Selective reduction of arsenic species by hydride generation: atomic absorption spectrometry part 1 - reduction media

Chemical interferences in hydride-generation atomic spectrometry

Hydride-doped coinage metal superatoms and their catalytic applications