Abstract:Accurately evaluating the simple shear in sheet metals has proven to be challenging owing to three reasons: a) the detailed shear strain evaluation is different from one publication to another; b) the measured strain is strongly dependent on the employed virtual strain gauge size (LVSG) when digital image correlation (DIC) is utilized; and c) the negligence of the strain perturbation phenomenon (Swift effects) will only result in a rough estimation of the strain–stress behavior. Thus, in this study, a finite strain perturbation analysis according to the configuration of experimental tests was constructed to understand the shear strain–stress evolution, and a high-resolution quasi-in-situ strain measurement technology was developed to capture the localized shear strain with reliable results. Material anisotropy and simple shear specimen geometry were identified as the two major contributors to the Swift effects. Hence, a finite strain perturbed shear kinematics was first proposed, revealing that some specific shear strain estimations led to a certain degree of error (∼12–25%) at large deformation levels. This work demonstrated that the finite element simulation of simple shear tests, performed using the carefully calibrated YLD2004 yield model, can be utilized to reasonably predict perturbation. A Vickers-indentation-based quasi-in-situ strain measurement was further developed to obtain reliable local strain of the shear zone with LVSG =28 μm. The technique was found to provide high-resolution strain detection to satisfy the necessary conditions of accurate strain measurement when a narrow shear band is present. The results yielded a 30% higher von Mises strain under simple shear deformation than that reported in previous publications for a similar DP980 sheet. The said result was also found to be larger than the fracture strain determined through the so-called “hybrid method”. The proposed perturbed shear kinematics was further implemented in the anisotropic elastoplasticity framework to show that the magnitude of normal stresses did not always remain in the second order with respect to the shear stress due to strain perturbation. Thus, the concept of “perturbed” shear stress was designed to consider the effects of perturbation, and the findings signified a 6–13% change in shear stress compared with the commonly used shear stress for tested scenarios.

Quick and repeatable shear modulus measurement based on torsional resonance and torsional wave propagation using a piezoelectric torsional transducer

Interpretation of Torsional Shear Results for Nonlinear Stress–strain Relationship

High precision measurement of shear modulus based on Michelson equal thickness interference

Quartz crystal microbalance based on torsional piezoelectric resonators.

Time-multiplexed laser self-mixing sensor for measurement of multiple material elastic moduli

Investigations of Thickness-Shear Mode Elastic Constant and Damping of Shunted Piezoelectric Materials with a Coupling Resonator

Off-epicentral measurement of laser-ultrasonic shear-wave velocity and its application to elastic-moduli evaluation

Laser Self-Mixing Sensor for Simultaneous Measurement of Young’s Modulus and Internal Friction (Invited)

Quasi-plane Shear Wave Propagation Induced by Acoustic Radiation Force with a Focal Line Region: a Simulation Study

Torsional Vibration Tests of Extruded Polystyrene with Improved Accuracy in Determining the Shear Modulus

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

Application of Air-Coupled Ultrasonic Nondestructive Testing in the Measurement of Elastic Modulus of Materials

Use of Torsional Acoustic Resonators for Microweighing, Polymer Rheology, and Monitoring of Biofilm Formation

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer

Quantitative Measurements of Shear Displacement Using Atomic Force Microscopy

Characterization of Piezoelectric Materials Using Ultrasonic and Resonant Techniques

On the use of hollow tube geometries for resonant ultrasound spectroscopy

In-plane selective excitation of arbitrary vibration modes using thickness-shear (d15) piezoelectric transducers

Complex Young's Modulus Measurement by Incident Wave Extracting in a Thin Resonant Bar

Determining equivalent-sectional shear modulus in torsion tests for laminated glass beams using photogrammetry method

Simple shear deformation of sheet metals: finite strain perturbation analysis and high-resolution quasi-in-situ strain measurement