Abstract:The pressure of electromagnetic radiation in the optical range is widely used to hold microparticles in a given place and control their movement. This is possible by focusing the laser radiation into an area with the dimension of several micrometers. The intensity of radiation in this area is large and sufficient to retain micro-particles in the laser beam and manipulate them. Nowadays, intensive research is underway on the use of microwave and terahertz radiation and the possibility of applying radiation pressure in these ranges. But in the microwave range, the focal spot dimension is much larger than in the optical one. Therefore, control of the objects whose dimensions are comparable to those of the focal spot using the radiation pressure requires very high power. For the objects with small dimensions, a small amount of radiation energy falls on them, and the acting force decreases. However, it is known that thin conductive fibers interact very strongly with microwave radiation. This can be used to levitate short thin metal fibers (vibrators), hold them in predicted place and control their position in space. The paper describes the measurements of the pressure of microwave radiation with a wavelength of 8 mm on thin copper fibers. Torsional balance is used for this purpose. In the metal case on a suspension from a tungsten fiber with a diameter of 8 microns there is located the rocker arm with 50 mm length with receiving elements in the form of system of copper fibers with a diameter of 300 microns and 15 mm length. Microwave radiation was directed to one of the receiving elements using a horn. The calibration of torsion balance, the measurement process, and the evaluation of the resulting error are described. The measurements gave the value of the efficiency factor of the radiation pressure Qpr = 4.86. This agrees satisfactorily with the results of calculations Qpr = 5.39. The difference is 10%.

Measurement of Radio-Frequency Radiation Pressure

Radiation pressure approach to the measurement of single-pulse microwave power

Measurement of microwave radiation pressure on thin metal fibers

Power Density Measurements at 15 GHz for RF EMF Compliance Assessments of 5G User Equipment

Radiation Pressure Actuation of Test Masses

Practical Realization of the watt from Planck's Constant using Radiation Pressure

rf measurements and tuning of the 1-meter-long 750 MHz radio-frequency quadrupole for artwork analysis

High-precision RF voltage measurements using longitudinal phase-space tomography in CERN PSB and SPS

Calibration Principle and Correction Factor for Flow Calorimeter in RF Medium-Power Measurement

Optical power meter using radiation pressure measurement

Pascal Realization by Comb-Spectral-Interferometry Based Refractometer

Measurement of induced currents in radio frequency magnetic fields based on near field antenna perturbations

Toward the realization of a primary low-pressure standard using a superconducting microwave resonator

Quantifying Excess Power from Radio Frequency Interference in Epoch of Reionization Measurements

Optical measurement of acoustic radiation pressure of the near-field acoustic levitation through transparent object

Measurement Campaign of Radio Frequency Interference in a Portion of the C-Band (4–5.8 GHz) for the Sardinia Radio Telescope

Direct Implementation of a Frequency-Programmable Josephson Voltage Standard to Provide an SI Traceable Optical Power Scale

A Contactless Method for Measuring Amplitude and Phase of RF Voltages up to 26.5 GHz

An EIRP Measurement Method of High-Power Microwave Systems Based on Near-Field Testing

A new technique to measure noise parameters for global 21-cm experiments

Background Radiation Measurements at High Power Research Reactors