Abstract:The article is devoted to the sorption concentration of platinum (II,IV), palladium (II) and rhodium (III) ions from chloride media on a carbon synthetic sorbent. For the study of the sorption concentration of platinum group metals, the carbon synthetic sorbent Lewatit AF5 was chosen. This sorbent has high mechanical strength, high surface area, narrow pore size distribution, and low cost compared to silicate or polymer sorbents. Sorption concentration was carried out under static conditions from model chloride solutions. The concentration of analytes in the initial solutions ranged from 8 to 50 mmol/dm3. Equilibrium concentrations of metals in solutions were determined by inductively coupled plasma atomic emission spectrometry. The dependences of adsorption on contact time, free acidity and redox potential of the system were studied, and the limiting absorption values for each of the metals studied were determined. The study of the kinetic parameters of the sorption of Pt (IV), Pd (II) and Rh (III) ions was carried out from chloride solutions characterized by free acidity values of 0.01 mol/dm3. The time for establishing sorption equilibrium was determined, which was 4 hours for each of the ions. When studying the dependence of adsorption on free acidity and the oxidation-reduction potential of the system (ORP), it was revealed that with an increase in free acidity and redox potential, a decrease in sorption activity is observed, thus we can conclude that aquated complexes of platinum metals, in which metals present not in the highest oxidation state, involved in the sorption process. Processing of experimental data showed the applicability of the linear equation of the Langmuir isotherm for the description of the adsorption process, the limiting adsorption values were calculated, using which the sorption capacity of the sorbent was assessed. The sorption capacity for Pt (II, IV), Pd (II) and Rh (III) was 1.24 mmol/g; 1.16 mmol/g and 0.57 mmol/g, respectively. High values of sorption capacity, as well as a fairly short time to achieve sorption equilibrium without the use of means for the acceleration of the process, in combination with the mechanical characteristics of the sorbent, allow us to conclude that the Lewatit AF5 sorbent is promising for the concentration of platinum group metals from hydrochloric acid solutions.

Rectifying inaccuracies in adsorption modeling. Comment on "Amino- and sulfur-containing POSS for highly efficient and selective extraction of platinum group elements from acidic solution"

Rooting out faulty adsorption models. Comment on "Magnetic Prussian blue nanoshells are controllable (sic) anchored on the surface of molybdenum disulfide nanosheets for efficient separation of radioactive cesium from water"

Influence of phosphate anion adsorption on the kinetics of oxygen electroreduction on low index Pt(hkl) single crystals.

Highly Selective Adsorption for Palladium Removal by Impregnation Preparation of a Macroporous N-based Functional Composite

How to avoid mistakes in treating adsorption isotherm data (liquid and solid phases): Some comments about correctly using Radke-Prausnitz nonlinear model and Langmuir equilibrium constant

Some remarks on "Efficient removal of total arsenic (As3+/5+) from contaminated water by novel strategies mediated iron and plant extract activated waste flowers of marigold"

The Adsorption of Gold, Palladium, and Platinum from Acidic Chloride Solutions on Mesoporous Carbons

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres.

Non-reactive facet specific adsorption as a route to remediation of chlorinated organic contaminants

Correction: Redox behavior and adsorptive cathodic stripping voltammetric determination of nanomolar levels of palladium using a novel Schiff base reagent containing a squaric acid moiety

Evaluation of a triethylenetetramine-chitosan derivative for the removal of palladium ion from an intricate adsorbate system

Comment on "Highly efficient and sustainable cationic polyvinyl chloride nanofibrous membranes for removal of E. coli and Cr (VI): Filtration and adsorption"

Modulating the pore and electronic structure for targeted recovery of platinum: Accelerated kinetic and reinforced coordination

Comment on "Highly efficient and sustainable cationic polyvinyl chloride nanofibrous membranes for removal of <i>E. coli </i>and Cr (VI): Filtration and adsorption"

Modelling of the acid–base properties of natural and synthetic adsorbent materials used for heavy metal removal from aqueous solutions

Study of sorption of platinum, palladium and rhodium ions on a carbon sorbent

A post-synthetic modification strategy for enhancing Pt adsorption efficiency in MOF/polymer composites

New Insight into the Adsorption of Ruthenium, Rhodium,and Palladium from Nitric Acid Solution by a Silica-Polymer Adsorbent

The shortcomings of semi-local and hybrid functionals: what we can learn from surface science studies

Tackling Deficiencies in the Presentation and Interpretation of Adsorption Results for New Materials.

Standardized methodology for performance evaluation in using polyaniline-based adsorbents to remove aqueous contaminants