Effects of probiotic therapy on hepatic encephalopathy in patients with liver cirrhosis: an updated meta-analysis of six randomized controlled trials.

Jun Xu,R. Ma,Li-Feng Chen,Li-Jun Zhao,Kangli Chen,Ren-Bing Zhang

DOI: https://doi.org/10.1016/S1499-3872(14)60280-0

IF: 3.355

2014-08-15

Hepatobiliary & Pancreatic Diseases International

Abstract:

What problem does this paper attempt to address?

Highly Selective Adsorption for Palladium Removal by Impregnation Preparation of a Macroporous N-based Functional Composite

Yanchao Lu,Lei Xu,Yanli Li,Hua Yang,Ziyang Liu,Li Jiang,Anyun Zhang

DOI: https://doi.org/10.1080/07366299.2017.1412113

2017-01-01

Solvent Extraction and Ion Exchange

Abstract:A novel mesoporous polymer-based composite, C7-BTBP/XAD-7, was prepared by impregnating 6,6’-bis(5,6-diheptyl-1,2,4-triazin-3-yl)-2,2’-bipyridine (C7-BTBP) into the pores of the polymeric XAD-7 carrier. The microstructure of the material was characterized by scanning electron microscopy (SEM), nitrogen adsorption-desorption isotherms, and thermogravimetric analysis (TGA). The selective adsorption of Pd(II) onto C7-BTBP/XAD-7 from a HNO3 medium containing some typical metals, including Ru(III), Fe(III), Mo(VI), Zr(IV), Li(I), Na(I), K(I), Rb(I), Cs(I), Mg(II), Ca(II), Sr(II), Ba(II), Y(III), La(III), Nd(III), and Yb(III), was investigated. The polymeric composite exhibited strong adsorption affinity, high selectivity, and fast adsorption rate for Pd(II) in 3.0 M HNO3. The adsorption isotherm fitted well with Langmuir model, with a maximum adsorption capacity of 0.412 mmol/g. The hybrid polymeric composite was very stable in HNO3 solution. The kinetics of Pd(II) coordinated with C7-BTBP was discussed by Density Function Theory (DFT) calculations.
Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Lei Xu,Anyun Zhang,Fengmei Zhang,Jiyong Liu

DOI: https://doi.org/10.1016/j.jhazmat.2017.04.038

IF: 13.6

2017-01-01

Journal of Hazardous Materials

Abstract:The effective removal of heavy metal 107Pd(II) from highly active liquid waste (HLW) is very valuable for reducing its hazardous and risk to public health and environment. For this purpose, a novel silica-bipyridine multidentate functional adsorbent was synthesized by vacuum infusing a new asymmetric N-donor ligand CA-MTBP (bipyridine derivative) into the macroporous SiO2-P support. SEM, N2 adsorption-desorption isotherms, TGA, XRD, FT-IR, 29Si solid-state NMR and XPS spectroscopy were utilized to systematically characterize the physicochemical properties of the adsorbent. The characterization results indicated that CA-MTBP was successfully immobilized onto the pores of SiO2-P by intermolecular interaction. Strong hydrogen-bonding interactions identified by single crystal structure of the ligand and 29Si NMR may play a key role in achieving this immobilization. TGA and TOC studies showed that CA-MTBP/SiO2-P had excellent thermal stability and highly HNO3 resistance. EDS and XPS investigations provided directly evidences for Pd(II) being selectively adsorbed onto the adsorbent. The adsorbent had excellent adsorption capability, fast adsorption kinetics and high selectivity for Pd(II) over other typical tested metals in HNO3 media.
Targeting of platinum capture under 1+1 aqua regia using robust and recyclable polymeric polyamine resin: Adsorption performance and mechanism

Bohan Li,Wei Xiong,Ying Cao,Xiaoyu Zhou,Haochen Zhu,Min Li,Liming Yang,Penghui Shao

DOI: https://doi.org/10.1016/j.envres.2023.115814

IF: 8.3

2023-06-01

Environmental Research

Abstract:The targeted capture of platinum from complex and harsh acidic digests such as those platinum-containing secondary resources is essential from the perspectives of green development. Here, a polyamine chelating resin (CMPs-PEI) with excellent selectivity and acid resistance was prepared by a nucleophilic substitution reaction using chloromethylated polystyrene as the parent and polyethyleneimine as the modifier. The experimental results revealed that the adsorbent showed excellent adsorption effect on platinum under different acidities, and its maximum adsorption capacity was up to 337 mg/g at pH 2. More impressively, a rather high capacity of 162.41 mg/g was achieved in 1 + 1 aqua regia (pH -0.7), which was much higher than other adsorbent materials under the same conditions. In addition, the recovery of platinum by CMPs-PEI in practical platinum-containing iron concentrate abatement solution was 100 %. Mechanistic studies showed that the protonated amine groups on CMPs-PEI bound PtCl62- and partially reduced PtCl42- by electrostatic attraction. Meanwhile, the excellent regeneration performance of CMPs-PEI indicated that it showed great potential for green and economic recovery of precious metal ions.

environmental sciences,public, environmental & occupational health
Highly Selective Adsorption of New Bis-Opened-Triazine Materials Hybridized with a Cross-Linked Polymer Support for Palladium and Some Typical Coexisting Metals

Anyun Zhang,Huimin Wu,Hao Fu,Zhanghao Xu,Yanqin Ji

DOI: https://doi.org/10.1021/acs.jced.8b01124

2019-01-01

Abstract:A novel polymer hybrid bis-opened-triazine adsorbent, BOTZX, was prepared by impregnation and immobilization. It was achieved through the in situ introduction of a new monopyridine-derived bis-opened-triazine ligand, BOTZ, into the pores of the cross-linked inert polymer carrier under vacuum hybridization. The adsorption of 20 representative metals on BOTZX was studied over the ranges of 0.4 to 6.0 M HNO3 and 298 to 318 K. BOTZX had strong uptake ability and high selectivity for Pd over others except for Zr. The removal efficiency was more than 99.8% for Pd and less than 0.11% for others, except for Zr at 31.5%. The Pd adsorption capacity was 0.228 mmol/g under the optimal conditions of 1.0 M HNO3 and a contact time of 30 min at 298 K. The experimental data fit the Langmuir model well, reflecting the monolayer uptake mechanism. Thermodynamic parameters Delta H degrees, Delta G degrees, and Delta S degrees and valuable chemical engineering data of Pd adsorption were obtained. It is promising to apply BOTZX in the simultaneous removal of Pd and minor actinide from highly active liquid waste in the framework of the SPMP process.
Enrichment and activation of cyano in cobalt hexacyanoferrate for specific recovery of ultra-low concentrations of platinum

Meng Liu,Xinxin Long,Xiaoping Li,Yuxuan Du,Yingxin Zhao,Zonghan Huang,Yang Chen,Rongzhi Chen

DOI: https://doi.org/10.1016/j.seppur.2023.124925

IF: 8.6

2023-09-13

Separation and Purification Technology

Abstract:Adsorption recovery of ultra-low concentrations (1 ppm) of platinum (Pt) was challenging due to the inferior sensitivity response and poor specific affinity between sorbents and target ions. Herein, enrichment and activation of the cyano group (CN) on cobalt hexacyanoferrate (CoHCF) were achieved by crystal facets engineering to capture Pt(II) efficiently and specifically. The Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and density-functional theory (DFT) calculations results revealed that the activity and density of CN on the (2 2 0) facets were higher than that on the (2 0 0) facet. The Pt(II) adsorption efficiency on the CN-enriched and -activated CoHCF (CoHCF (2 2 0) ) reached 92.5%, which was 1.56 times higher than that on the original CoHCF (59.2%). The specific adsorption of Pt(II) was driven by the coordination interaction between Fe-CN– and Pt, leading to the Pt(II)-Pd(II) separation efficiency attained 98.95% within 20 min. In addition, CoHCF (2 2 0) equipped with Pt(II) could be further chemically reduced as a photocatalyst for hydrogen evolution. This study suggested an attractive strategy for the practical recovery of Pt(II) and comprehensive utilization of ultra-low concentration Pt-containing wastewater.

engineering, chemical
A post-synthetic modification strategy for enhancing Pt adsorption efficiency in MOF/polymer composites

Till Schertenleib,Vikram V. Karve,Dragos Stoian,Mehrdad Asgari,Olga Trukhina,Emad Oveisi,Mounir Mensi,Wendy L. Queen

DOI: https://doi.org/10.1039/d4sc00174e

IF: 8.4

2024-05-11

Chemical Science

Abstract:Growing polymers inside porous metal–organic frameworks (MOFs) can allow incoming guests to access the backbone of otherwise non-porous polymers, boosting the number and/or strength of available adsorption sites inside the porous support. In the present work, we have devised a novel post-synthetic modification (PSM) strategy that allows one to graft metal-chelating functionality onto a polymer backbone while inside MOF pores, enhancing the material's ability to recover Pt( IV ) from complex liquids. For this, polydopamine (PDA) was first grown inside of a MOF, known as Fe-BTC (or MIL-100 Fe). Next, a small thiol-containing molecule, 2,3-dimercapto-1-propanol (DIP), was grafted to the PDA via a Michael addition. After the modification of the PDA, the Pt adsorption capacity and selectivity were greatly enhanced, particularly in the low concentration regime, due to the high affinity of the thiols towards Pt. Moreover, the modified composite was found to be highly selective for precious metals (Pt, Pd, and Au) over common base metals found in electronic waste ( i.e. , Pb, Cu, Ni, and Zn). X-ray photoelectron spectroscopy (XPS) and in situ X-ray absorption spectroscopy (XAS) provided insight into the Pt adsorption/reduction process. Last, the PSM was extended to various thiols to demonstrate the versatility of the chemistry. It is hoped that this work will open pathways for the future design of novel adsorbents that are fine-tuned for the rapid, selective retrieval of high-value and/or critical metals from complex liquids.

chemistry, multidisciplinary
Molybdenum cofactor deficiency associated with Dandy-Walker malformation

G. Pintos-Morell,M. A. Naranjo,M. Artigas,M. Rogé,M. Rodes,M. Coll,J. Johnson,K. Rajagopalan

DOI: https://doi.org/10.1007/BF00711384

IF: 4.7501

1995-01-01

Journal of Inherited Metabolic Disease

Abstract:
Tailoring the Coordination Micro-Environment in Nanotraps for Efficient Platinum/Palladium Separation

Yanpei Song,Gaurav Verma,Kui Tan,Kolade A Oyekan,Juejing Liu,Andrew Strzelecki,Xiaofeng Guo,Abdullah M Al-Enizi,Ayman Nafady,Shengqian Ma

DOI: https://doi.org/10.1002/adma.202313747

Abstract:Recovering platinum group metals from secondary resources is crucial to meet the growing demand for high-tech applications. Various techniques are explored, and adsorption using porous materials has emerged as a promising technology due to its efficient performance and environmental beingness. However, the challenge lies in effectively recovering and separating individual platinum group metals (PGMs) given their similar chemical properties. Herein, a breakthrough approach is presented by sophisticatedly tailoring the coordination micro-environment in a series of aminopyridine-based porous organic polymers, which enables the creation of platinum-specific nanotraps for efficient separation of binary PGMs (platinum/palladium). The newly synthesized POP-o2NH2-Py demonstrates record uptakes and selectivity toward platinum over palladium, with the amino groups adjacent to the pyridine moieties being vital in improving platinum binding performance. Further breakthrough experiments underline its remarkable ability to separate platinum and palladium. Spectroscopic analysis reveals that POP-o2NH2-Py offers a more favorable coordination fashion to platinum ions compared to palladium ions owing to the greater interaction between N and Pt4+ and stronger intramolecular hydrogen bonding between the amino groups and four coordinating chlorines at platinum. These findings underscore the importance of fine-tuning the coordination micro-environment of nanotraps through subtle modifications that can greatly enhance the selectivity toward the desired metal ions.
Engineering Porosity into Trimetallic PtPdNi Nanospheres for Enhanced Electrocatalytic Oxygen Reduction Activity

Chunjie Li,You Xu,Yinghao Li,Hongjie Yu,Shuli Yin,Hairong Xue,Xiaonian Li,Hongjing Wang,Liang Wang

DOI: https://doi.org/10.1016/j.gee.2018.07.004

IF: 12.781

2018-01-01

Green Energy & Environment

Abstract:Platinum (Pt)-based multi-metallic nanostructures show great promise as electrocatalysts for the oxygen reduction reaction (ORR) in fuel cell cathodes. Herein, we report a simple, one-step surfactant-directed synthetic strategy to directly synthesize tri-metallic PtPdNi mesoporous nanospheres (PtPdNi MNs) in a high yield. The synthesis could be accomplished in aqueous solution at mild reaction temperature (40 degrees C) without needing any organic solvent, yielding well-dispersed PtPdNi MNs with uniform shape and narrow size distribution. Benefitting from their unique mesoporous and highly open structure and tri-metallic composition, the as-synthesized PtPdNi MNs demonstrate superior catalytic activity and stability for ORR in acidic solution in comparison with PtPdNi nanodendrites (PtPdNi NDs), PtPd MNs and commercial Pt/C catalyst. The present approach may open a reliable path to the design of advanced electrocatalysts with desired performance. (C) 2018, Institute of Process Engineering, Chinese Academy of Sciences. Publishing services by Elsevier B.V.
Adsorption of Platinum(iv) and Palladium(ii) from Aqueous Solution by Magnetic Cross-Linking Chitosan Nanoparticles Modified with Ethylenediamine.

Limin Zhou,Jianping Xu,Xizhen Liang,Zhirong Liu

DOI: https://doi.org/10.1016/j.jhazmat.2010.06.062

IF: 13.6

2010-01-01

Journal of Hazardous Materials

Abstract:The adsorption characteristics of platinum(IV) and palladium(II) from aqueous solutions onto the ethylenediamine-modified magnetic chitosan nanoparticles (EMCN) have been investigated. The magnetic chitosan nanoparticles were prepared by adding the basic precipitant of NaOH solution into a W/O microemulsion system. The transmission electron microscope showed that the diameter of EMCN was from 15 to 40 nm. The adsorption experiments indicated that the maximum adsorption capacity occurred at around pH 2.0 for both Pt(IV) and Pd(II). Due to the small diameter and the high surface reactivity, the adsorption equilibrium of Pt(IV) and Pd(II) onto the EMCN reached very quickly. The maximum loading capacity of EMCN for Pt(IV) and Pd(II) was determined to be 171 and 138 mg/g, respectively. Sorption isotherms were determined both in single component with pure metal solutions and bicomponent systems with different Pd/Pt mass ratios. The results showed that the sorbents had a greater affinity for Pt(IV) than for Pd(II). The total sorption capacity was comparable to that of each metal individually, indicating that the metals compete for the same sorption sites. It was found that 0.4 M HNO(3)-1.0 M thiourea solution provided effectiveness of the desorption of Pt(IV) and Pd(II) from EMCN, while 5 M ammonia exhibited the highest selectivity for the tested metal ions.
New Insight toward Synergetic Effect for Platinum Recovery Coupling with Fe(III)-Oxalate Complexes Degradation through Photocatalysis

Xinna Zhao,Guangbing Liang,Hui Wang,Zhenping Qu

DOI: https://doi.org/10.1021/acssuschemeng.3c02096

IF: 8.4

2023-07-27

ACS Sustainable Chemistry & Engineering

Abstract:Platinum (Pt) is a nonrenewable mineral with limited reserves and a patchy distribution. Pt demand and consumption are growing year after year. As a result, recovering Pt from the secondary resources is critical. A new strategy for effective Pt recovery employing Fe(III)-oxalate complexes under UV and visible light irradiation is proposed in this paper. This approach can recover 98.9% of Pt in 30 min under the conditions of 365 nm UV irradiation, leaching time = 30 min, C2O4 2– concentration = 333.33 g/L, and H2O2 addition = 0.60 vol %. More importantly, 95.6% of Pt can also be recovered in 8 h under sunlight. The homogeneous photocatalytic reaction is rapid and efficient, and meanwhile, no strong acid, base, or volatile toxic organic solvent is required. Additionally, the iron utilized in the process may be well-recycled, solving the problem of recovery difficulty of homogeneous photocatalysts and lowering the cost of leaching. Simultaneously, the Pt complex recovered from the waste catalyst is utilized in situ to manufacture 0.1 wt % Pt/ZSM-5 catalyst, which shows the complete conversion of toluene at 200 °C and can remain stable during the long duration reaction of 1200 min. Overall, it can not only provide a new environmentally friendly technique to recycle Pt from spent catalysts but also save manufacturing cost of new catalysts.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Highly Selective Adsorption and Recovery of Palladium from Spent Catalyst Wastewater by 1,4,7,10-Tetraazacyclododecane-Modified Mesoporous Silica

Chao Zeng,Pei Liu,Zhongliang Xiao,Yan Li,Liubin Song,Zhong Cao,Daoxin Wu,Yue-Fei Zhang

DOI: https://doi.org/10.1021/acssuschemeng.1c05915

2022-01-10

Abstract:A new silicon-based adsorbent with good adsorption performance on Pd(II) was synthesized from mesoporous silica as a carrier and 1,4,7,10-tetraazacyclododecane as a functional ligand. The batch method was used to investigate and evaluate the adsorption performance of the adsorbent on Pd(II) in HCl-HNO3 solution. Influencing factors such as the contact time, pH, temperature, initial Pd(II) concentration, and elution conditions on adsorption and elution were systematically investigated and optimized. Simultaneously, adsorption kinetics, thermodynamics, and adsorption isotherms were investigated. The results revealed that under optimal adsorption conditions, the recovery rate of the adsorbent to Pd(II) could reach 98.30–99.75% in a mixed solution, which was mostly unaffected by other impurity ions. After five adsorption–desorption cycles, the recovery rate of the adsorbent to Pd(II) remained more than 93%. Pd(II) adsorption by the adsorbent was rapid within 30 min, and the recovery rate could reach 85%. In combination with density functional theory calculations, an adequate recovery mechanism was proposed to describe the selective adsorption and desorption process of Pd(II), in which the chemical adsorption dominated. As a result, this material can adsorb and recover Pd(II) with high selectivity, a rapid adsorption rate, good stability, and reusability, making it ideal for recovering waste palladium resources under acidic conditions.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Selective recovery of platinum from spent catalysts to fabricate platinum/amorphous manganese oxide/corrugated silica carrier for formaldehyde removal

Fengshan Yu,Maolin Tian,Xueli Wang,Wenjie Zhang,Chunxia Wang,Jiawei Wen,Junlian Wang,Yaping Guo,Guoyong Huang

DOI: https://doi.org/10.1016/j.jece.2024.114637

IF: 7.7

2024-11-10

Journal of Environmental Chemical Engineering

Abstract:The efficient recovery and reutilization of spent Pt catalysts have two huge challenges in the metallurgical and chemical industries. Herein, platinum was selectively retrieved from spent Pt/γ-Al 2 O 3 catalysts by a microwave-assisted aqua regia digestion strategy, and the as-obtained platinum extract was utilized to prepare a novel Pt/amorphous MnO x /corrugated silica carrier (Pt/MnO x /CSC) catalyst for formaldehyde removal. To decrease consumption of toxic aqua regia, the γ-Al 2 O 3 in the spent catalysts was converted to chemically stabile α-Al 2 O 3 via high-temperature calcination. The high Pt leaching efficiency of 98.31 % was achieved at a digestion temperature of 110 °C and aqua regia concentration of 40 vol %. However, the high leaching temperatures and aqua regia concentrations caused the part dissolution of α-Al 2 O 3 , and thus decreased the Pt leaching efficiency. The CSC in the Pt/MnO x /CSC catalysts served as a support, while both the Pt nanoparticles and amorphous MnO x microspheres acted as active catalysts. The synergistical effects between the Pt and amorphous MnO x endowed the composite catalysts with excellent catalytic activity, and the HCHO removal efficiency reached 100 % even after five cycle tests. On the one hand, the nanostructured MnO x microspheres provided great surface areas and rich oxygen vacancies for heterogeneous catalysis. On the other hand, the Pt nanoparticles not only enhanced the low-temperature reducibilities of MnO x , but also decreased the apparent activation energies of HCHO catalytic oxidation. This work provided a new strategy for the selective recovery of platinum from spent catalysts and the reutilization of Pt-based catalysts for the HCHO thermal catalytic oxidation.

engineering, chemical, environmental
ENZYME LOCALIZATION IN BACILLUS MEGATERIUM

R. Storck,J. T. Wachsman

DOI: https://doi.org/10.1128/jb.73.6.784-790.1957

IF: 3.2

1957-06-01

Journal of Bacteriology

Abstract:Weibull (1953a) has shown that after osmotic lysis of protoplasts of Bacillus megaterium, prepared by controlled treatment with lysozyme, only two microscopically detectable structures remain; membrane-like bodies termed "ghosts," and granules. The ghosts were found to sediment as a dark yellow fraction by centrifugation at 10,000 G (Weibull, 1953b) and to contain almost all the pigmented material and cytochromes of the whole cell. The latter observation is in agreement with the particulate nature (particles sedimenting between 22,000 and 100,000 G) of the cytochrome complement of Pseudomonas fluorescens (Stanier et al., 1953; Wood, 1955), Escherichia coli (Asnis et al., 1956), and Acetobacter suboxydans (Smith, 1954). In subsequent experiments Weibull (1956a) has obtained evidence that the ghost is the cytoplasmic membrane, perhaps in a denatured form. A brief treatment of the yellow ghost fraction in the sonic oscillator destroys the ghost structure and leads to the formation of granules which could be sedimented at 105,000 G (Weibull, 1953b). The similarity in chemical and physical properties between these granules and the particulate fractions isolated after the mechanical disruption of several different types of bacteria have led Stanier (1954) to propose that "the bacterial cytochrome system, along with some other enzymes, may be a built-in part of the cell membrane, and not, as in higher organisms, a mitochondrial component." The present work supports this concept by
Selective capture of palladium by protonation-armed pyridine nitrogen in extreme water environments

Dewei Li,Lei Zhou,Min Li,Jifeng Yang,Ziwei Yao,Li Zhang,Zhu Meng,Liming Yang,Hui Shi,Huan Tang,Xubiao Luo,Shenglian Luo,Penghui Shao

DOI: https://doi.org/10.1016/j.cej.2023.143235

IF: 15.1

2023-06-01

Chemical Engineering Journal

Abstract:Due to the hostile environment in which it is recovered, selective separation of palladium from the leachate of spent catalysts containing palladium is of considerable utility but faces substantial obstacles. This work designed and synthesized a bipyridine-based porous organic polymer (POP-BPy) via free radical polymerization. Meanwhile, its adsorption characteristics and the mechanism of adsorption in extreme environments were examined. In hostile conditions, the resultant POP-BPy display exceptional mechanical stability and environmental resistance. Impressively, POP-BPy has an excellent adsorption capacity of Pd(II) (248 mg/g) in harsh environments (aqua regia: AR; half-diluted aqua regia: AR“1 + 1”), and also had superior selectivity and rapid kinetics. The selectivity of POP-BPy for Pd(II) was verified in combination with relevant experiments (βPd(II)/Pt(II) = 36.19, βPd(II)/Pt(II) = 23.90). Furthermore, combining density functional theory (DFT) and molecular dynamics (MD) simulations, the mechanism of selectivity of POP-BPy for Pd(II) was revealed from static adsorption sites to dynamic adsorption processes in a holistic manner, which attributed to the strong attraction of protonated pyridine nitrogen to PdCl4 2- and site suitability. Furthermore, the application of POP-BPy to spent catalyst recovery resulted in up to 100% removal of Pd(II) from the actual leaching solution, and fixed bed column experiments can effectively treat 2688 bed volumes (L) of feed streams (10 mg/L) before reaching the breakthrough point (<1 mg/L). Overall, this work has opened up new avenues for the selective recycling of valuable metals in harsh environments.

engineering, chemical, environmental
Metal-Organic Coordination Networks: Prussian Blue and Its Synergy with Pt Nanoparticles to Enhance Oxygen Reduction Kinetics

Lei Du,Chunyu Du,Guangyu Chen,Fanpeng Kong,Geping Yin,Yong Wang

DOI: https://doi.org/10.1021/acsami.6b02630

2016-06-22

Abstract:Oxygen reduction reaction (ORR) is the cornerstone in the electrochemical energy conversion devices such as fuel cells and metal-air batteries. It remains a great challenge to develop the ORR electrocatalysts with fast kinetics and high durability. Herein, we report the synthesis of a novel metal-organic coordination networks material, prussian blue crystalline nanograins mosaicked within amorphous membrane (PB CNG-M-AM). Such unique PB CNG-M-AM is designed to enhance the electrocatalysis of Pt toward the ORR by the electrostatic self-assembly. Thus, obtained Pt-PB/C catalysts form numerous Pt-PB-gas three-phase boundaries and present rather high intrinsic activity, four-electron selectivity and superior stability. Moreover, a completely new synergetic mechanism between PB and Pt is discovered, which delicately alters the ORR route and significantly enhances the ORR kinetics. This work provides not only a new strategy and mechanism for developing highly efficient ORR electrocatalysts, but also an alternative way to utilize metal-organic coordination networks materials.
Biomolecular mechanism in the uptake of Pt(IV) by Saccharomyces cerevisiae EBY100 cells expressing platinum binding peptides

Brian Gidudu,Boitumelo F. Mashangoane,Evans M.N. Chirwa

DOI: https://doi.org/10.2139/ssrn.4735142

IF: 5.479

2024-06-08

Minerals Engineering

Abstract:Platinum group metals (PGMs) are currently under increased demand due to limited availability and their unique properties; therefore, their limited availability presents an economically attractive opportunity to recover these metals from waste. The recovery of PGMs from effluents using conventional techniques such floatation, precipitation and ion exchange results in large volumes of hazardous waste as well as high operating costs and low efficiencies. Biosorption using biomass such as microorganisms as adsorbents can offer a cheap, efficient and environmentally friendly alternative for the recovery of PGMs. Despite previous research on the use of biosorption techniques for the recovery of PGMs; there is still room for improvement in the way that microorganisms absorb metals. Such advancements can be achieved through the use of genetically engineered peptides for inorganics (GEPI) for cell surface display purposes. In this work, Saccharomyces cerevisiae EBY100 cells were genetically engineered for cell surface display of platinum binding peptides to enable Pt(IV) adsorption from an aqueous solution. The transformed Saccharomyces cerevisiae EBY100 cells attained the maximum adsorption of 40 % for Pt(IV) after 3 h at the optimal pH = 3. As the initial metal concentration rose from 10 ppm to 50 ppm, the biosorption Pt(IV) increased as well, reaching a biosorption capacity of 85 mg/g. The findings also showed that the Freundlich model best explained the Pt(IV) biosorption isotherm onto P3.1, while the pseudo-second-order model best explained the Pt(IV) adsorption kinetics onto P3.1.

engineering, chemical,mining & mineral processing,mineralogy
An elegant 3D-ordered hierarchically porous framework to anchor Pt nanocrystals for durable oxygen reduction reaction

Ying Long,Yan Xia,Run Zhu,Shenxin Xia,Yangfei Cao,Tongtao Li,Angang Dong

DOI: https://doi.org/10.1016/j.jcis.2023.05.106

IF: 9.9

2023-05-25

Journal of Colloid and Interface Science

Abstract:While Platinum (Pt)-based electrocatalysts have been extensively studied for the oxygen reduction reaction (ORR), improving their durability remains a challenge. One promising approach is to design structure-defined carbon supports that can uniformly immobilize Pt nanocrystals (NCs). In this study, we present an innovative strategy for constructing three-dimensional ordered, hierarchically porous carbon polyhedrons (3D-OHPCs) as an efficient support for immobilizing Pt NCs. We achieved this by template-confined pyrolysis of a zinc-based zeolite imidazolate framework (ZIF-8) grown within the voids of polystyrene templates, followed by carbonizing the native oleylamine ligands on Pt NCs to produce graphitic carbon shells. This hierarchical structure enables the uniform anchorage of Pt NCs, while enhancing facile mass transfer and local accessibility of active sites. The optimal material with graphitic carbon armor shells on the surface of Pt NCs (CA-Pt), named , shows comparable activities to commercial Pt/C catalysts. Furthermore, it can withstand over 30,000 cycles of accelerated durability tests, owing to the protective carbon shells and hierarchically ordered porous carbon supports. Our study presents a promising approach for designing highly efficient and durable electrocatalysts for energy-based applications and beyond.

chemistry, physical
Highly Selective Recovery of Palladium by A New Silica-Based Adsorbent Functionalized with Macrocyclic Ligand

Feifei Bai,Gang Ye,Guangjin Chen,Jichao Wei,Jianchen Wang,Jing Chen

DOI: https://doi.org/10.1016/j.seppur.2012.12.021

IF: 8.6

2013-01-01

Separation and Purification Technology

Abstract:A new kind of silica-based adsorbent with high selectivity and efficient adsorption for palladium ion (Pd(II)) was synthesized in this study. A macrocyclic polyether isomer was modified for incorporation to the silica matrix as a ligand to realize the complexation between Pd(II) and the adsorbent. The adsorption of Pd(II) in HNO3 media was evaluated by both batch and column operations. Influences including acidity, contact time, initial metal concentration and elution conditions were detailed. From a practical viewpoint, the functionalized adsorbent was employed for the recovery of Pd(II) from the simulated high level liquid waste (HLLW) containing a large amount of interferences. Superior selectivity to Pd(II) as well as a recovery rate higher than 90% was obtained. A mechanism concerning the formation of complex ion-pair was proposed for the description of the Pd(II)-binding process. The macrocyclic ligand functionalized silica adsorbent possesses potential for the recovery of the palladium resource in radioactive liquid waste.
Selective Adsorbent Design with Multifunctional Surfaces: Innovating Solutions for Heterogeneous Catalysis in Water

Yanbin Wang,Junxi Liang,Shimin Liu,Qing Wang,Yujing Zhang,Yu Tian,Zhengang Ke,Qiong Su,Shaofeng Pang

DOI: https://doi.org/10.1021/acs.langmuir.4c00702

IF: 3.9

2024-04-30

Langmuir

Abstract:Heterogeneous catalytic systems with water as the solvent often have the disadvantage of cross-contamination, while concerns about the purification and workup of the aqueous phase after reactions are rare in the lab or industry. In this context, designing and developing the functional selective solid adsorbent and revealing the adsorption mechanism can provide a new strategy and guidelines for constructing supported heterogeneous catalysts to address these issues. Herein, we report the stable composite adsorbent (Fe/ATP@PPy: magnetic Fe3O4/attapulgite with the polypyrrole shell) that features an integrated multifunctional surface, which can effectively tune the selective adsorption processes for Cu2+, Co2+, and Ni2+ ions and nitrobenzene via the cooperative chemisorption/physisorption in an aqueous system. The adsorption experiments showed that Fe/ATP@PPy displayed significantly higher adsorption selectivity for Ni2+ than Cu2+ and Co2+ ions, especially which exhibited an approximate 100.00% removal for both Ni2+ ions and nitrobenzene in the mixture system with a low concentration. Furthermore, combined tracking adsorption of Ni2+ ions and X-ray photoelectron spectroscopy characterization confirmed that the effective adsorption occurs via ion transfer coordination; the pathway was further validated at the molecular level through theoretical modeling. In addition, the selective adsorption mechanism was proposed based on the adsorption experiment, characterization, and the corresponding density functional theory calculation.

Effects of probiotic therapy on hepatic encephalopathy in patients with liver cirrhosis: an updated meta-analysis of six randomized controlled trials.

Highly Selective Adsorption for Palladium Removal by Impregnation Preparation of a Macroporous N-based Functional Composite

Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Targeting of platinum capture under 1+1 aqua regia using robust and recyclable polymeric polyamine resin: Adsorption performance and mechanism

Highly Selective Adsorption of New Bis-Opened-Triazine Materials Hybridized with a Cross-Linked Polymer Support for Palladium and Some Typical Coexisting Metals

Enrichment and activation of cyano in cobalt hexacyanoferrate for specific recovery of ultra-low concentrations of platinum

A post-synthetic modification strategy for enhancing Pt adsorption efficiency in MOF/polymer composites

Molybdenum cofactor deficiency associated with Dandy-Walker malformation

Tailoring the Coordination Micro-Environment in Nanotraps for Efficient Platinum/Palladium Separation

Engineering Porosity into Trimetallic PtPdNi Nanospheres for Enhanced Electrocatalytic Oxygen Reduction Activity

Adsorption of Platinum(iv) and Palladium(ii) from Aqueous Solution by Magnetic Cross-Linking Chitosan Nanoparticles Modified with Ethylenediamine.

New Insight toward Synergetic Effect for Platinum Recovery Coupling with Fe(III)-Oxalate Complexes Degradation through Photocatalysis

Highly Selective Adsorption and Recovery of Palladium from Spent Catalyst Wastewater by 1,4,7,10-Tetraazacyclododecane-Modified Mesoporous Silica

Selective recovery of platinum from spent catalysts to fabricate platinum/amorphous manganese oxide/corrugated silica carrier for formaldehyde removal

ENZYME LOCALIZATION IN BACILLUS MEGATERIUM

Selective capture of palladium by protonation-armed pyridine nitrogen in extreme water environments

Metal-Organic Coordination Networks: Prussian Blue and Its Synergy with Pt Nanoparticles to Enhance Oxygen Reduction Kinetics

Biomolecular mechanism in the uptake of Pt(IV) by Saccharomyces cerevisiae EBY100 cells expressing platinum binding peptides

An elegant 3D-ordered hierarchically porous framework to anchor Pt nanocrystals for durable oxygen reduction reaction

Highly Selective Recovery of Palladium by A New Silica-Based Adsorbent Functionalized with Macrocyclic Ligand

Selective Adsorbent Design with Multifunctional Surfaces: Innovating Solutions for Heterogeneous Catalysis in Water