Abstract:Thermoelectric materials with high average power factor and thermoelectric figure of merit (ZT) has been a sought-after goal. Here, we report new n-type thermoelectric system CuxPbSe0.99Te0.01 (x = 0.0025, 0.004, and 0.005) exhibiting record-high average ZT ∼ 1.3 over 400–773 K ever reported for n-type polycrystalline materials including the state-of-the-art PbTe. We concurrently alloy Te to the PbSe lattice and introduce excess Cu to its interstitial voids. Their resulting strong attraction facilitates charge transfer from Cu atoms to the crystal matrix significantly. It follows the increased carrier concentration without damaging its mobility and the consequently improved electrical conductivity. This interaction also increases effective mass of electron in the conduction band according to DFT calculations, thereby raising the magnitude of Seebeck coefficient without diminishing electrical conductivity. Resultantly, Cu0.005PbSe0.99Te0.01 attains an exceptionally high average power factor of ∼27 μW cm–1 K–2 from 400 to 773 K with a maximum of ∼30 μW cm–1 K–2 at 300 K, the highest among all n- and p-type PbSe-based materials. Its ∼23 μW cm–1 K–2 at 773 K is even higher than ∼21 μW cm–1 K–2 of the state-of-the-art n-type PbTe. Interstitial Cu atoms induce the formation of coherent nanostructures. They are highly mobile, displacing Pb atoms from the ideal octahedral center and severely distorting the local microstructure. This significantly depresses lattice thermal conductivity to ∼0.2 Wm–1 K–1 at 773 K below the theoretical lower bound. The multiple effects of the dual incorporation of Cu and Te synergistically boosts a ZT of Cu0.005PbSe0.99Te0.01 to ∼1.7 at 773 K.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.0c07712?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.0c07712</a>.Details in theoretical calculations, additional APT results, and thermoelectric properties (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c07712/suppl_file/ja0c07712_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High wide-temperature-range thermoelectric performance in n-PbSe integrated with quantum dots

Realizing Ultrahigh Thermoelectric Performance in n‐Type PbSe Through Lattice Planification and Introducing Liquid‐Like Cu Ions

Enhanced Average Power Factor and ZT Value in PbSe Thermoelectric Material with Dual Interstitial Doping

Exceptionally High Average Power Factor and Thermoelectric Figure of Merit in n-type PbSe by the Dual Incorporation of Cu and Te

Introducing PbSe quantum dots and manipulating lattice strain contributing to high thermoelectric performance in polycrystalline SnSe

Engineering atomic-level crystal lattice and electronic band structure for extraordinarily high average thermoelectric figure of merit in n-type PbSe

Enhanced Thermoelectric Performance of N‐Type PbSe Through Semi‐Coherent Nanostructure by AgCuTe Alloying

Synergistically optimizing interdependent thermoelectric parameters of n-type PbSe through introducing a small amount of Zn

Pseudo‐Nanostructuring and Grain Refinement Enhance the Near‐Room‐Temperature Thermoelectric Performance in n‐type PbSe

Multiple valence bands convergence and strong phonon scattering lead to high thermoelectric performance in p-type PbSe

High-Ranged <i>ZT</i> Value Promotes Thermoelectric Cooling and Power Generation in n-Type PbTe

Boosting the Thermoelectric Performance of PbSe from the Band Convergence Driven By Spin‐Orbit Coupling

Synergistically optimizing interdependent thermoelectric parameters of n-type PbSe through alloying CdSe

Enhancing Thermoelectric Performance of p-Type PbSe through Suppressing Electronic Thermal Transports

High Thermoelectric Performance of N-Type PbTe1−S Due to Deep Lying States Induced by Indium Doping and Spinodal Decomposition

Complex lattice occupation of copper leading to enhanced thermoelectric performance in n-type PbSe

Atomic Level Defect Structure Engineering for Unusually High Average Thermoelectric Figure of Merit in N‐type PbSe Rivalling PbTe

Dense dislocations enable high-performance PbSe thermoelectric at low-medium temperatures

Improved thermoelectric performance in PbSe–AgSbSe2 by manipulating the spin-orbit coupling effects

Optimizing the thermoelectric performance of n-type PbSe through dynamic doping driven by entropy engineering

Robustly Boosting Thermoelectric Performance of N‐Type PbSe via Lattice Plainification and Dynamic Doping