Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Tool steel ion beam assisted nitrocarburization

The Microstructure of Tool Steel after Low Temperature Ion Nitriding

Nanosized precipitates in H13 tool steel low temperature plasma nitriding

In situ photoemission electron spectroscopy study of nitrogen ion implanted AISI-H13 steel

Effect of Carbon on the Compound Layer Properties of AISI H13 Tool Steel in Pulsed Plasma Nitrocarburizing

Effect of Post-Plasma Nitrocarburized Treatment on Mechanical Properties of Carburized and Quenched 18Cr2Ni4WA Steel

Effect of ion beam nitriding on diamond nucleation and growth onto steel substrates

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

Tribological Studies of Plasma Source Ion Nitrided Low Alloy Tool Steel

Diffusion Nitride Coatings for Heat-Resistant Steels

Effect of Plasma Nitriding Pretreatment on the Mechanical Properties of AlCrSiN-Coated Tool Steels

Effect of N2/Ar Ratio on Wear Behavior of Multi-Element Nitride Coatings on AISI H13 Tool Steel

Nitrogen Ion Implantation on the Mechanical Properties of Aisi 420 Martensitic Stainless Steel

Microstructure–Wear Resistance Relationship of Nitrogen-Containing High-Speed Tool Steel, AISIM41: Non-equilibrium Solidification

V STAINLESS STEEL PROPERTY IMPROVEMENT BY ION NITRIDING AND NITROCARBURIZING

Properties of Stainless-Steel Surface after Hollow Cathode Assisted Plasma Nitriding

Investigation of Diamond Film Deposition on Steel Without and with Ion Beam Nitriding Pretreatment

Short time nitriding and nitrocarburizing of martensitic stainless steel

Effect of ion nitriding by glow discharge on the physical and mechanical properties of the plastically deformed tool steel R6M5

Interfacial Reactions During IBAD and Their Effects on the Adhesion of Cr–N Coatings on Steel

The role of Argon in the AISI 420 Stainless-Steel Low-Temperature Plasma Nitriding