Abstract:Due to the reduction in transistor size, test engineers face a severe issue in power minimization. VLSI circuit's power dissipation has become a vital concern due to the switching activity of the Circuit Under Test (CUT). Switching activity is a significant factor in determining power consumption for CMOS VLSI circuits. In this paper, we formulate a distance estimation technique and reordering using the Tversky index. Here, the distance between the test vectors is calculated using the Tversky index with the formation of an adjacency matrix, and reordering is performed. The experimental results of the proposed method have been compared to different distance measures and existing techniques. It shows that the switching activity is reduced from 52.5% to 21.5%, and the average power reduction is from 42% to 14.6% when the distance is estimated on reordering using the Tversky index measure. Thus, the Tversky index distance measure performs better than the Hamming, gray, and Linear feedback shift register (LFSR) methods. Switching activity estimation for complex ISCAS circuits has been performed and compared with existing methods for superior performance. We have also developed a Built in Self-Test (BIST) for the C17 benchmark circuit, which uses the Tversky counter as a test pattern generator using the TANNER EDA tool. Thus, an efficient deterministic BIST for the C17 benchmark circuit was designed to detect all the stuck-at faults, and the same procedure can be used to create BIST for all CUT and precomputed test sets for real-time field testing.

BILBO-friendly Hybrid BIST Architecture with Asymmetric Polynomial Reseeding

An Effective BIST Circuit for Barrel Shifter Within 8 Bits MCU

A Folded Computation-in-Memory Accelerator for Fast Polynomial Multiplication in BIKE.

Hybrid BIST for system-on-a-chip using an embedded FPGA core

Secure Software/Hardware Hybrid In-Field Testing for System-on-Chip

An Novel Solution for Testing Power and Testing Time

A Power Efficient BIST TPG Method on Don't Care Bit Based 2-D Adjusting and Hamming Distance Based 2-D Reordering

Test Power Reduction through Reordering Algorithm Implementation and Advancements in BIST Architecture

Compressing Test Data for Deterministic BIST Using a Reconfigurable Scan Arhcitecture

Design of Phase Shifter for Logic BIST

A Reconfigurable Scan Architecture With Weighted Scan-Enable Signals for Deterministic BIST

Improving test effectiveness of scan-based BIST by scan chain partitioning

A unified architecture for speed-binning and circuit failure prediction and detection

A Delay Evaluation Circuit for Analog BIST Function.

Improving Test Quality of Scan-Based BIST by Scan Chain Partitioning

Low-Power Scan-Based Built-In Self-Test Based on Weighted Pseudorandom Test Pattern Generation and Reseeding

BIST Methodology, Architecture and Circuits for Pre-Bond TSV Testing in 3D Stacking IC Systems

A Novel Bist Approach For Testing Dlls Of Soc

Built-In Self-Test Architecture Enabling Diagnosis for Massive Embedded Memory Banks in Large SoCs

A Low Power Test Pattern Generator for Bist

Reduction of test power and data volume in BIST scheme based on scan slice overlapping