Abstract:Acetylene (C2H2) is a flammable and explosive alkyne, which is usually used as a fault feature of oil-immersed transformers. When the concentration of dissolved C2H2 in the transformer oil exceeds 0.1 ppm, it is considered that the transformer has a discharge fault. Therefore, the development of a reliable measurement system that can detect trace amounts of C2H2 is of great significance in the field of industrial equipment failure detection. To this end, this paper built a high-sensitivity cantilever-enhanced photoacoustic spectrometer with a broadband infrared emitter and a detection limit of ∼0.078 ppm with the 1σ confidence level was obtained. Moreover, through the Allan variance analysis, a minimum detection limit of ∼0.008 ppm was obtained when the photoacoustic spectrometer’s sampling time is set to 80 s. Besides, by analyzing the source of the instrument’s background noise, it is found that the vibration noise caused by the mechanical chopper is a significant source of background noise in the photoacoustic signal. Therefore, the photoacoustic spectrometer’s sensitivity can be effectively improved by replacing the traditional mechanical chopper with an electronic chopper. Lastly, the sensitivity of the photoacoustic spectrometer under different optical power of the infrared emitter, the temperature and pressure conditions of the C2H2/N2 gas sample is evaluated. It turns out that as the optical power and gas sample pressure increase, the sensitivity of the photoacoustic spectrometer increases, while as the temperature of the gas sample increases, the sensitivity of the photoacoustic spectrometer decreases.

Sub-part-per-trillion level detection of hydrogen fluoride by cantilever-enhanced photo-acoustic spectroscopy

Sub-parts-per-trillion level sensitivity in trace gas detection by cantilever-enhanced photo-acoustic spectroscopy

Detection of Femtomolar Concentrations of HF Using an SiO(2) Microcantilever.

A Charge-Coupled Device-Based Laser Photofragment Fluorescence Spectrometer for Detection of Mercury Compounds

Parts-per-billion-level detection of hydrogen sulfide based on doubly resonant photoacoustic spectroscopy with line-locking

Parts-per-billion-level detection of hydrogen sulfide based on near-infrared all-optical photoacoustic spectroscopy

Carbon monoxide impurities in hydrogen detected with resonant photoacoustic cell using a mid-IR laser source

Hydrogen peroxide detection with quartz-enhanced photoacoustic spectroscopy using a distributed-feedback quantum cascade laser

Compact step-added T-type PAC for enhanced hydrogen detection: A photoacoustic frequency shift approach

Sub-ppb level HCN photoacoustic sensor employing dual-tube resonator enhanced clamp-type tuning fork and U-net neural network noise filter

Highly Sensitive Hydrogen Sensing Based on Tunable Diode Laser Absorption Spectroscopy with a 2.1 μm Diode Laser

Precisely sensing hydrofluoric acid by photonic crystal hydrogels

Detection of trace C2H2 in N2 buffer gas with cantilever-enhanced photoacoustic spectrometer

A resonant photoacoustic cell for hydrogen gas detection

Photoacoustic dual-gas sensor for simultaneous detection of hydrogen and water vapor

Cavity-enhanced optical frequency comb spectroscopy in the mid-infrared - application to trace detection of H2O2

Ultra-Highly Sensitive Hydrogen Chloride Detection Based on Quartz-Enhanced Photothermal Spectroscopy

A sensor based on high-sensitivity multi-pass resonant photoacoustic spectroscopy for detection of hydrogen sulfide

Integrated near-infrared fiber-optic photoacoustic sensing demodulator for ultra-high sensitivity gas detection

High-sensitivity methane detection based on QEPAS and H-QEPAS technologies combined with a self-designed 8.7 kHz quartz tuning fork

Sensitive methane detection based on quartz-enhanced photoacoustic spectroscopy with a high-power diode laser and wavelet filtering