Abstract:We designed and implemented a photoacoustic (PA) sensor for H2S detection in SF6 background gas based on a multi-pass differential photoacoustic cell (MDPC) and a near-infrared distributed feedback (DFB) laser. In the MDPC apparatus, two resonators with identical geometric parameters were vertically and symmetrically embedded. The differential processing algorithm of two phase-reversed signals realized the effective enhancement of the PA signal and suppressed the flow noise in the dynamic sampling process. In addition, the λ/4 buffer chamber in the MDPC was utilized as a muffler to further reduce the flow noise and realize the dynamic detection of H2S. The collimated excitation light was reflected 30 times in a multi-pass structure constituted of two gold-plated concave mirrors, and an absorption path length of 4.92 m was achieved. Due to the high gas density of SF6, the relationship between the signal-to-noise ratio (SNR) and the gas flow was different between SF6 and N2 background gases. The maximum flow rate of the characteristic gas components detected in the SF6 background is 150 standard cubic centimeters per minute (SCCM), which is lower than 350 SCCM in N2. The linearity property was analyzed, and the results show that the sensitivity of the sensor to H2S in the SF6 background was 27.3 μV/ppm. With the structure, parameters, temperature, gas flow, and natural frequency of the MDPC been optimized, a minimum detection limit (MDL) of 11 ppb was reached with an averaging time of 1000 s, which furnished an effective preventive implement for the safe operation of gas insulation equipment.

A sensor based on high-sensitivity multi-pass resonant photoacoustic spectroscopy for detection of hydrogen sulfide

Parts-per-billion-level detection of hydrogen sulfide based on doubly resonant photoacoustic spectroscopy with line-locking

An optical sensor for hydrogen sulfide detection in open path using WMS-2 f /1 f technique

Hydrogen sulphide detection using near-infrared diode laser and compact dense-pattern multipass cell

Parts-per-billion-level detection of hydrogen sulfide based on near-infrared all-optical photoacoustic spectroscopy

Multi-pass Differential Photoacoustic Sensor for Real-Time Measurement of SF6 Decomposition Component H2S at the ppb Level

Sensitive Absorption Measurements of Hydrogen Sulfide at 1.578 Μm Using Wavelength Modulation Spectroscopy

Calibration-free Sensor for hydrogen sulfide detection based on tunable laser absorption spectroscopy technique

Enhanced Near-Infrared QEPAS Sensor for Sub-Ppm Level H2S Detection by Means of a Fiber Amplified 1582 Nm DFB Laser

Near-infrared laser photoacoustic gas sensor for simultaneous detection of CO and H2S

High Sensitive Detection for SF6 Decomposition Component of H2S Based on Laser Photoacoustic Spectroscopy

Dual-gas Detection Based on High-Performance Spherical Photoacoustic Cells

Highly Sensitive Near-Infrared Gas Sensor System Using a Novel H-type Resonance-Enhanced Multi-Pass Photoacoustic Cell

Near-Infrared Quartz-Enhanced Photoacoustic Sensor for H2S Detection in Biogas

Highly Sensitive Hydrogen Sensing Based on Tunable Diode Laser Absorption Spectroscopy with a 2.1 μm Diode Laser

Enhanced Sensitivity of a Hydrogen Sulfide Sensor Based on Surface Acoustic Waves at Room Temperature

Detection of Hydrogen Sulfide in Sewer Using an Erbium-Doped Fiber Amplified Diode Laser and a Gold-Plated Photoacoustic Cell

An ultra-sensitive optical H 2 S sensor based on thermal conversion combined with UV-DOAS: Dynamic detection from ppm to ppb level

A resonant photoacoustic cell for hydrogen gas detection

Ppb-Level H2s Detection for Sf6 Decomposition Based on A Fiber-Amplified Telecommunication Diode Laser and A Background-Gas-Induced High-Q Photoacoustic Cell

A Near‐infrared Trace Hydrogen Sulfide Sensor Based on CEEMDAN and PSO‐LSSVM