Abstract:Analysis of the strategy for superconducting cavity material procurement and quality management is done on the basis of the experience with the cavity production for the European x-ray free electron laser (EXFEL) facility. An adjustment of the material specification to EXFEL requirements, procurement of material, quality control (QC), documentation, and shipment to cavity producers have been worked out and carried out by DESY. A multistep process of qualification of the material suppliers included detailed material testing, single- and nine-cell cavity fabrication, and cryogenic radiofrequency tests. Production of about 25 000 semi-finished parts of high purity niobium and niobium-titanium alloy in a period of three years has been divided finally between companies Heraeus, Tokyo Denkai, Ningxia OTIC, and PLANSEE. Consideration of large-grain (LG) material as a possible option for the EXFEL has resulted in the production of one cryogenic module consisting of seven (out of eight) LG cavities. LG materials fulfilled the EXFEL requirements and showed even 25% to 30% higher unloaded quality factor. A possible shortage of the required quantity of LG material on the market led, however, to the choice of conventional fine-grain (FG) material. Eddy-current scanning (ECS) has been applied as an additional QC tool for the niobium sheets and contributed significantly to the material qualification and sorting. Two percent of the sheets have been rejected, which potentially could affect up to one-third of the cavities. The main imperfections and defects in the rejected sheets have been analyzed. Samples containing foreign material inclusions have been extracted from the sheets and electrochemically polished. Some inclusions remained even after 150 μm surface layer removal. Indications of foreign material inclusions have been found in the industrially fabricated and treated cavities and a deeper analysis of the defects has been performed.

Automated Optical Inspection and Image Analysis of Superconducting Radio-Frequency Cavities

First attempts in automated defect recognition in superconducting radio-frequency cavities

High resolution diagnostic tools for superconducting radio frequency cavities

Visual, Optical and Replica Inspections: Surface Preparation of 650 MHz NB Cavity for PIP-II Linac

Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

Improving Interface Physics Understanding in High-Frequency Cryogenic Normal Conducting Cavities

Superconducting cavity material for the European XFEL

Advanced surface treatments for medium-velocity superconducting RF cavities for high accelerating gradient continuous-wave operation

SRF Cavity Fabrication and Materials

Superconducting RF cavity R&D for future accelerators

Investigations of surface quality and SRF cavity performance

Investigation Of Breakdown Induced Surface Damage On 805 Mhz Pillbox Cavity Interior Surfaces

Sub-THz Characterization of Technical Surfaces for Particle Accelerator Vacuum Chambers

Research on Field Emission and Dark Current in ILC Cavities

Ultra-Low Surface Resistance via Vacuum Heat Treatment of Superconducting Radiofrequency Cavities

Optical Inspection of the Silicon Micro-strip Sensors for the CBM Experiment employing Artificial Intelligence

Design and primary test of full scale cavity of cyciae-100

Design and Simulation of 500 MHz Single Cell Superconducting RF Cavity for SILF

High-Q operation of SRF cavities: The potential impact of thermocurrents on the RF surface resistance

Performance Analysis of Spoke Resonators, Statistics from Cavity Fabrication to Cryomodule Testing

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators