Abstract:Microfluidics, as an emerging technology, is highly dependent on the evolution of device materials and fabrication techniques. While replica molding of polydimethylsiloxane and hot embossing/injection molding of thermoplastics are most popular, they are either hard to scale up or inappropriate for laboratory-scale prototyping. Recently, photocurable resins, as a huge class of materials, have attracted extensive interest. However, very few of them can now be used in device fabrication due to the challenge in machining these materials. In response, we herein propose a novel concept of composite elastomers, which can covalently link with and consequently offer a flexible support to photocured thin films. This effect would allow most photocurable resins to be used in microfluidic device fabrication, greatly enriching the material choices for diverse applications. Moreover, the whole fabrication process becomes very simple and rapid, with an impressive throughput of at least hundreds of replicas per day. With these features, it is reasonably expected that the composite elastomer-enabled rapid photofabrication method will be very competent for laboratory prototyping, providing not only the ease of fabrication but also a possibility to select the materials specifically for ultimate applications and promising potential for volume production without the redevelopment process. These may offer a good opportunity to narrow the current gap between academic research and industrial practice.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c06143.Movies showing the flexibility of the composite elastomer, process of composite elastomer-enabled photofabrication of the microfluidic device, generation of W/O/W double emulsion droplets, and operation of Quake valves (MP4, MP4, MP4, MP4)This article has not yet been cited by other publications.

Considerations for the Design and Rapid Manufacturing of Pop‐Up MEMS Devices

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

MEMS Microfabrication Technology Based on Rapid ProtoTyping

Rapid Manufacturing of Multilayered Microfluidic Devices for Organ on a Chip Applications

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

A Rapid Prototyping Approach for Multi-Material, Reversibly Sealed Microfluidics

Green, Low-Cost, User-Friendly, and Elastomeric (GLUE) Microfluidics

Rapid Prototyping of Organ-on-a-Chip Devices Using Maskless Photolithography

A facile and low-cost micro fabrication material: flash foam

A density functional theory study of atomic steps on stoichiometric rutile TiO2(110).

Rapid Prototyping of Thermoplastic Microfluidic Devices

Composite Elastomer-Enabled Rapid Photofabrication of Microfluidic Devices

Pulmonary angiography in severe chronic pulmonary hypertension.

A Membrane Associated mCherry Fluorescent Reporter Line for Studying Vascular Remodeling and Cardiac Function During Murine Embryonic Development

Removable Fast Package Technology For Mems Devices Using Polymer Connectors And Silicon Sockets

Temporal screw suspension for complicated midface fractures.

Rapid prototyping of PDMS microdevices via <i></i>PLAT on nonplanar surfaces with flexible hollow-out mask

Rapid prototyping for high-pressure microfluidics

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

XX/XO mosaicism in a girl. Report of the youngest patient.

Additive Manufactured Piezoelectric-Driven Miniature Gripper