Abstract:Here, through the effective passivation of thick film defects in perovskite by employing the RbX addition strategy, the crystalline quality, enhances the device performance of bifacial perovskite solar cells (PSCs), positioning them at the forefront of current research in this field. The front photovoltaic conversion efficiency reaches 21.04%, with a bifaciality of ≈80%, achieving an power generation density (PGD) of 24.36 mW cm−2 at a albedo of 0.2. Bifacial perovskite solar cells (PSCs) possess a dual light‐absorbing structure, which enables higher power output at lower additional costs. However, the replacement of metal electrodes with transparent ones leads to serious light loss, necessitating a thicker perovskite layer to compensate for this drawback. In this study, the impact of different rubidium halide (RbCl, RbBr, and RbI) additives is systematically investigated on precursor solubility and the quality of micron‐sized perovskite thick films prepared using a two‐step method. It is observed that RbCl exhibited the strongest interactions with PbI2, enhancing its solubility and leading to the formation of multihole PbI2 films that promote subsequent crystallization of thick perovskite film. Additionally, the RbCl‐based perovskite film demonstrates a narrowed bandgap attributed to the formation of a‐FAPbI3. Consequently, the short‐circuit current density (Jsc) and open‐circuit voltage (Voc) in the RbCl‐based bifacial PSCs are simultaneously enhanced, and a record efficiency of 20.86% (21.04% certified) is also obtained among n‐i‐p bifacial PSCs, exhibiting an ≈80% bifaciality and a power generation density (PGD) exceeding 24 mW cm−2 with a reflectivity value of 0.2. More importantly, the optimized device does not show any performance degradation after continuous illumination under 1sun for 1000 h.

Additive engineering by RbCl for efficient carbon based perovskite solar cells

Carbon Quantum Dot Additive Engineering for Efficient and Stable Carbon-Based Perovskite Solar Cells

Rubidium Halide Additive Engineering for Efficient and Stable Bifacial Perovskite Solar Cells

Mitigating interfacial and bulk defects via chlorine modulation for HTL-free all-inorganic CsPbI2Br carbon-based perovskite solar cells with efficiency over 14%

Ultrahigh Fill-Factor All-Inorganic CsPbBr3 Perovskite Solar Cells Processed from Two-Step Solution Method and Solvent Additive Strategy

Additive Engineering by Dicyandiamide for High-Performance Carbon-based Inorganic Perovskite Solar Cells

Uncovering synergistic effect of chloride additives for efficient quasi-2D perovskite solar cells

High-performance carbon-based CsPbI2Br perovskite solar cells via small molecule modification

Intermediate Phase-Assisted Sequential Deposition Toward 15.24%-Efficiency Carbon-Electrode Cspbi<sub>2</sub>br Perovskite Solar Cells

Efficient Liquid‐Solid Coregulation Engineering in Mixed‐cation Lead Mixed‐halide Perovskite for Photovoltaic Performance Improvement

First Investigation of Additive Engineering for Highly Efficient Cs2AgBiBr6-based Lead-Free Inorganic Perovskite Solar Cells

A double perovskite participation for promoting stability and performance of Carbon-Based CsPbI2Br perovskite solar cells

Two birds with one stone: SmCl3 modified TiO2/perovskite interface to enhance the performance of carbon-based perovskite solar cell

Synergistic Effect of RbBr Interface Modification on Highly Efficient and Stable Perovskite Solar Cells

Multistrategy Toward Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Chloride Engineering for Boosting Perovskite Photovoltaics: Impact on Precursor Coordination, Crystallization, and Film Quality

Surface Regulation via Carboxylate Polymer for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Efficient and stable carbon‐based all‐inorganic CsPbIBr2 perovskite solar cells obtained via treatment by biological active substance additive

Improved Photovoltaic Performance of CsPbI2Br Perovskite Films Via Bivalent Metal Chloride Doping

A Bilateral Cyano Molecule Serving As an Effective Additive Enables High-Efficiency and Stable Perovskite Solar Cells