Abstract:Obtaining a perovskite light-absorbing layer with good crystallization, low defect concentration, good stability, and well-matched energy levels is critical to obtaining high-efficiency perovskite solar cells (PSCs). Here, a hybrid PSC with a graded band gap is explored using MAPbBr3 (MA = CH3NH3) and MAPbBr0.9I2.1 quantum dots (QDs) as component cells. We have creatively designed a solar cell device with a double-QD structure [indium tin oxide (ITO)/SnO2/perovskite:MAPbBr3 QDs/MAPbBr0.9I2.1 QDs/Spiro-OMeTAD/Au]. A better crystal film of the perovskite absorption layer can be obtained because the MAPbBr3 QDs are doped in an antisolvent, which induces nucleation and growth in the polycrystalline perovskite. In addition, we expect that digestive ripening occurred in the crystallization, and the oleic acid ligands on the surface of the QDs disintegrate during the doping process and transfer to the surface of the perovskite absorption layer finally; it follows that the hydrophobicity and stability of the perovskite film are greatly enhanced. Moreover, a thin film of MAPbBr0.9I2.1 QDs is introduced between the perovskite absorption layer and the hole layer, acting as an energy-level ladder, which leads to well-matched energy levels, an increase in fill factor (FF), and an enhanced hole transport capability. In particular, the mechanism of the crystallization process involving the effect of oleic acid ligands on the interior and surface of the perovskite film is fully discussed here. The final research results from the PSCs show that both high efficiency and long-term stability are achieved successfully by this design strategy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14191?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14191</a>.Parameters of carrier lifetimes in TRPL, parameters and calculated values in the Owens two-liquid method experiment, and J–V parameters; QD dispersion images; AFM images; perovskite film images; contact-angle test images; EIS spectrum; and boxplot of J–V parameters (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14191/suppl_file/am0c14191_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient Liquid‐Solid Coregulation Engineering in Mixed‐cation Lead Mixed‐halide Perovskite for Photovoltaic Performance Improvement

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Coordination modulated crystallization and defect passivation in high quality perovskite film for efficient solar cells

Crown Ethers with Different Cavity Diameters Inhibit Ion Migration and Passivate Defects toward Efficient and Stable Lead Halide Perovskite Solar Cells

Ionic Liquid‐Assisted Crystallization and Defect Passivation for Efficient Perovskite Solar Cells with Enhanced Open‐Circuit Voltage

Synergistical Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

Mitigating lattice strain and phase segregation of mixed-halide perovskite films via dual chloride additive strategy toward highly efficient and stable perovskite solar cells

Colloidal Stabilizer‐Mediated Crystal Growth Regulation and Defect Healing for High‐Quality Perovskite Solar Cells

Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells

Bidirectional Targeted Therapy Enables Efficient, Stable, and Eco‐Friendly Perovskite Solar Cells

Crown Ether-Induced Supramolecular Passivation And Two-Dimensional Crystal Interlayer Formation In Perovskite Photovoltaics

CH 3 NH 3 PbBr 3– x I x Quantum Dots Enhance Bulk Crystallization and Interface Charge Transfer for Efficient and Stable Perovskite Solar Cells

Mixed Cation Hybrid Lead Halide Perovskites with Enhanced Performance and Stability

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Rational design of the synergistic effect with lead iodide as the link for improving the efficiency of carbon-based perovskite solar cells

Multidentate Coordination Induced Crystal Growth Regulation and Trap Passivation Enables over 24% Efficiency in Perovskite Solar Cells

Controlling the Film Structure by Regulating 2D Ruddlesden–Popper Perovskite Formation Enthalpy for Efficient and Stable Tri-Cation Perovskite Solar Cells

Doping Amino-Functionalized Ionic Liquid in Perovskite Crystal for Enhancing Performances of Hole-Conductor Free Solar Cells with Carbon Electrode

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Phthalide and 1‐Iodooctadecane Synergistic Optimization for Highly Efficient and Stable Perovskite Solar Cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells