Abstract:Machining quality of spray holes directly affects injection performance and combustion efficiency of diesel engines. With the high standards of less emission and fuel economy, the spray holes used in the case of high injection pressure require the characters of small diameter <Phi 300 mu m, thick wall >1 mm, multi-holes >4, micro-taper shape with K-factor 0-2 and multidimensional space position. Mechanical drilling is difficult to meet the machining requirements of the spray holes. Micro electro discharge machining (EDM) has the advantages of less cutting force, without burrs, and even finish machining after heat treatment, so it fits for machining micro holes on metal alloy materials. In this study, a micro EDM equipment was developed for drilling the spray holes. Key technologies were discussed including an electrode feed head, a workpiece positioning mechanism and process control methods. In order to machine micro-taper holes and improve processing efficiency, the electrode feed head was designed with the special multifunction modules of a novel taper-swinging mechanism (TSM), a piezoelectric (PZT) actuator for assisting high-frequency vibration, and a dual-clamps inchworm mechanism for wear compensation of wire tool electrode. The equipment can achieve the spatial positions of pitch angle, roll angle, focal distance, and reference points of nozzles. The particular attention was also given to the proposed process control methods to ensure high consistency accuracy in machining multi-nozzles. In addition, performance tests and applied experiments were carried out. The study results show that the equipment can meet the machining requirements of the spray holes with diameters Phi 140-300 mu m, taper-angles 0-1.3 degrees (K-factor 0-2.3) with adjustment error <0.037 degrees, space accuracy <0.2 degrees, dimensional accuracy +/- 2 mu m and machining-feed efficiency of 1.5 mm/min. Crown Copyright (c) 2012 Published by Elsevier Inc. All rights reserved.

Same-spot micro-ECM based on constant-accelerated movement of the electrode

Micro Electrochemical Machining for Tapered Holes of Fuel Jet Nozzles

Fabrication of optimized streamlined micro nozzles by hybrid electrochemical techniques

Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles

Research on Ecm Process of Micro Holes with Internal Features

A Method for Micropipette-Based Meniscus-Confined Electrodeposition of Microstructures Without Nozzle Clogging

Performance improvement of high-speed EDM and ECM combined process by using a helical tube electrode with matched internal and external flushing

Swing Mechanism for Micro EDM Drilling of Fuel Jet Nozzles

Multiphysics Research on Electrochemical Machining of Micro Holes with Internal Features

Study of High-Speed Microhole Drilling by Combined Process using Laser and EDM-Apply for fuel injection nozzle-

Fabrication of a Tool Electrode with Hydrophobic Features and Its Stray-Corrosion Suppression Performance for Micro-electrochemical Machining

Precision EDM of Micron-Scale Diameter Hole Array Using in-Process Wire Electro-Discharge Grinding High-Aspect-Ratio Microelectrodes

Electrochemical Machining for Micro Holes with High Aspect Ratio on Metal Alloys Using Three-Electrode PPS in Neutral Salt Solution

Effect of Anisotropically-etched Silicon Electrode on Electrolytic Products Flow in Micro ECM

EDM Drilling Process of Micro Tapered Holes by Online Control of Machining Parameters

A Shunt-Assisted Silicon Electrode for Micro Electrochemical Machining

A Profile Shaping and Surface Finishing Process of Micro Electrochemical Machining for Microstructures on Microfluidic Chip Molds

Electrochemical machining of a rhombus hole with synchronization of pulse current and low-frequency oscillations

Study of electrode feeding method for EDM hollowing

A novel EDM method using longitudinal-torsional ultrasonic vibration (LTV) electrodes to improve machining performance for micro-holes

Side-Insulation of Tool Electrode and Application in Micro ECM