Abstract:A currently available commercial Calphad thermodynamic database was utilized to investigate its applicability to alloy design in the new class of Co-Ni-based γ′-strengthened high-temperature alloys. A simple primary design criterion was chosen: maximize the γ′ solvus temperature in the six-component Co-Ni-Al-Ti-W-Ta system while ensuring no formation of secondary, potentially deleterious phases. Secondary design considerations included the effects of alloying elements on equilibrium γ′ volume fraction and on solidus and liquidus temperatures. The identified composition, Co-30Ni-9Al-3Ti-7W-2Ta-0.1B (expressed in mole percent), representing a conservative estimate of the maximum allowable concentrations of alloying additions Al, Ti, W, and Ta, was subsequently produced and characterized. The experimentally measured γ′ solvus temperature of the new alloy was 1491 ± 3 K (1218 ± 3 °C), about 35 K (35 °C) above any previously reported two-phase γ−γ′ Co-(Ni)-based alloy. No secondary phases were observed in the alloy after annealing at temperatures between 1173 K and 1473 K (900 °C and 1200 °C). Additional alloy compositions with experimentally measured γ′ solvus temperatures in excess of 1533 K (1260 °C) were also identified employing the same basic approach. The efficacy of currently available thermodynamic databases in their application to Co-based γ′-strengthened superalloy development is discussed, including expanding design efforts to include additional alloying elements, as well as specific areas for improvement of future databases.

Evaluation of critical temperatures of as-cast Co-based superalloys as a function of alloying elements and their effect on microstructure

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Microstructure, Mechanical Properties and Thermal Stability of Ni-Based Single Crystal Superalloys with Low Specific Weight

The Effects of Microstructure on the Thermophysical Properties of the K439B Ni-Based Superalloy

L1 2 ‐Strengthened Co‐Rich Alloys for High‐Temperature Structural Applications: A Critical Review

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

Effects of Cobalt on Solidification Characteristics and As-Cast Microstructure of an Advanced Nickel-Based Single Crystal Superalloys

Application of Computational Thermodynamics to the Design of a Co-Ni-Based γ′-Strengthened Superalloy

High-strength Co–Al–V-base superalloys strengthened by γ′-Co3(Al,V) with high solvus temperature

High-throughput pseudo-binary diffusion couple approach for alloy design in cobalt-based superalloys

Tailoring coating composition for the associated microstructural stability of a single-crystal superalloy: an experimental and simulation study

Development of Co–Ni–Al–V–Ta–Cr-based superalloys with high-temperature strength and excellent oxidation resistance

Novel Ni–Co-based superalloys with high thermal stability and specific yield stress discovered by directed energy deposition

Thermogravimetric investigations of new γ-γ′ cobalt-based superalloys

Design of Novel Precipitate-Strengthened Al-Co-Cr-Fe-Nb-Ni High-Entropy Superalloys

Development of low-density γ/γ′ Co–Al–Ta-based superalloys with high solvus temperature

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

Evaluation of the impact of Mn and Al on the microstructure of Fe–Co–Ni–Cr based high entropy alloys

Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys

Exploring the Impact of Configurational Entropy on the Design and Development of CoNi-Based Superalloys for Sustainable Applications

Effects of Co on Microstructure Evolution of a 4th Generation Nickel-Based Single Crystal Superalloys