Abstract:We delve into theoretical and experimental considerations for determining the spectral bidirectional transmittance distribution function (BTDF) of thick samples across a broad viewing zenith angle range. Nominally, BTDF is defined as the ratio of transmitted radiance to incident irradiance measured from the same plane. However, when employing thick samples for BTDF measurements, the viewing plane of the transmitted beam may shift from the front to the rear surface of the sample, altering the measurement geometry compared to using the sample front surface as the reference plane. Consequently, the viewing zenith angle from the sample rear surface increases relative to the sample front surface, and the sample-to-detector-aperture distance decreases by an amount corresponding to the sample thickness. We introduce a method for determining the BTDF of thick samples, considering the transformation of practical measurement results to a scenario where the measurements are conducted at a very large distance from the sample. To validate the method, we utilize a BTDF facility equipped with two instruments that significantly differ in their sample-to-detector-aperture distances. We evaluate the impact of a 2 mm sample thickness on the BTDF by assessing the ratio of transmitted and incident radiant fluxes as a function of viewing zenith angle relative to the sample rear surface. The evaluation is conducted in the wavelength range from 550 nm to 1450 nm in 300 nm steps, and in the viewing zenith angle range from -70° to 70° in 5° steps. Measurements are performed in-plane at an incident zenith angle of 0°. It is concluded that consistent determination of BTDF of a thick sample is possible by converting the experimental parameters of the real measurements at relatively short distances from the sample to correspond to those that would be obtained from measurements at very large distances from the sample.

Optimisation of sample thickness for THz-TDS measurements

Considerations on measurement of bidirectional transmittance distribution function of thick samples over a wide range of viewing zenith angles

Optical and Geometrical Properties from Terahertz Time-Domain Spectroscopy Data

THz-TDS Reflection Measurement of Coating Thicknesses at Non-Perpendicular Incidence: Experiment and Simulation

Methods for fast and accurate material properties estimate with terahertz time-domain spectroscopy in transmission and reflection with optically thick materials

Numerical removal of water-vapor effects from THz-TDS measurements

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

THz time-domain spectroscopic investigations of thin films

In-Situ Thickness Measurement of Thin Deposited Layer on the Silicon Wafer Using Multi-Reflected Terahertz Electro-Magnetic Wave

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

The Influence of Microstructure Characteristics on Thickness Measurement of TBCs Using Terahertz Time-Domain Spectroscopy

Terahertz Sensing of Å‐scale Thin Dielectric Film Via Electron Tunnelling

Stratified dispersive model for material characterization using terahertz time-domain spectroscopy

Thickness-Dependent Raman Scattering from Thin-Film Systems

Physical constraints-based terahertz thickness measurement method of thermal barrier coating

Two methods of estimating sample thickness in FIB-TEM sample fabrication

A reliable method for extraction of material parameters in terahertz time-domain spectroscopy

Non-destructive thickness measurement of thermal barrier coatings using terahertz radiation

Thickness Dependence of Optical Transmittance of Transparent Wood: Chemical Modification Effects

Adaptive Sampling for Terahertz Time-Domain Spectroscopy and Imaging

Imaging thick samples with optical tomography