Abstract:We are exploring a scintillator-based detector with potential of high sensitivity, DOI capability and timing resolution in a single-side readout configuration. Our concept combines: 1) A design with 2+ crystal arrays stacked with relative offset, with inherent DOI information but good timing performance has not been shown with conventional light sharing readout. 2) Single crystal array with one-to-one coupling to the photodetector (PD) array, with good timing performance, but no DOI. We believe the combination, where the first layer of a staggered design is coupled one-to-one to a PD array may provide both DOI and timing. The concept is here evaluated through light transport simulations. Results show that: 1) In terms of DOI one-to-one readout of the first layer allows for accurate DOI extraction using a single threshold relative to the PD sum signal, for up to 4 layers. The number of PD pixels exceeding the threshold corresponds to the layer of interaction. The corresponding approach is not possible for the same geometries with a light sharing readout scheme. 2) When employing a low threshold of 2 optical photons the layered approach with one-to-one readout of the first layer improves timing close to the PD compared to single layer, due to reduced crystal thickness. Single detector timing resolution values of 91, 127, 151 and 164 ps were seen in the 4-layer design with unpolished pixels, compared to 148 ps for single array with one-to-one coupling. 3) For the layered design with light sharing readout, timing improves with increased PD pixel size, with an apparent tradeoff between spatial resolution and timing not observed for the one-to-one coupled counterpart. The combination of straightforward and accurate DOI determination, good timing performance and relatively simple design makes the proposed detector a promising candidate for brain dedicated DOI TOF-PET.

Timing Performance of a Double Layer Diamond Detector

DIAMASIC: A multichannel front-end electronics for high-accuracy time measurements for diamond detectors

Fast Timing With Silicon Carbide Low Gain Avalanche Detectors

The Design of Diamond Compton Telescope

Recent Advances in Diamond Detectors

Diamond-Like Carbon for the Fast Timing MPGD

Performance of triple-GEM detectors for the CMS Phase-2 upgrade measured in test beam

Timing performances of front-end electronics with 3D-trench silicon sensors

A layered single-side readout DOI TOF-PET detector

Latest results from the RD42 collaboration on the radiation tolerance of polycrystalline diamond detectors

Measurements of time resolution of the RD50-MPW2 DMAPS prototype using TCT and 90 Sr

GEMs with Double Layred Micropattern Electrodes and their Applications

Timing resolution in double-sided silicon photon-counting computed tomography detectors

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Study of nanodiamond photocathodes for MPGD-based detectors of single photons

Diamond Detectors for UV and X-Ray Source Imaging

Timing performance of small cell 3D silicon detectors

Performance of TPC Detector Prototype Integrated with UV Laser Tracks for the Circular Collider

The Timing Performance of A Two-Dimensional Position-Sensitive Silicon Detector

A New GEM-like Imaging Detector with Electrodes Coated with Resistive Layers

Performance of a Small AT-TPC Prototype