Abstract:With the development of the circular collider, it is necessary to make accurate physics experimental measurements of particle properties at higher luminosity [Formula: see text] pole. Micro-pattern gaseous detectors (MPGDs), which contain gaseous electron multiplier (GEM) and micro-mesh gaseous structures (Micromegas), have excellent potential for development as the readout devices of the time projection chamber (TPC) tracker detector. To meet the updated physics requirements of the high luminosity [Formula: see text] from the preliminary concept design report (preCDR) to concept design report (CDR) at the circular electron–positron collider (CEPC). In this paper, the space charge distortion of the TPC detector is simulated with the CEPC beam structure. Using the multi-physics simulation software package, the distribution of ion estimated by Geant4 is used as the input for the differential equation, and the relationship between the ion density distribution and electric field in the detector chamber is simulated. These simulation results show that the maximum deviation for Higgs [Formula: see text] meets the performance requirements in CEPC TPC detector at the high luminosity [Formula: see text] pole, while it is still a considerable challenge for [Formula: see text] pole, with the maximum deviation [Formula: see text]. According to the previous developments, the cascaded structure of GEM and Micromegas detector has been measured. The new considerations of the detector’s requirements were given, the gain needs to be reached to about 2000 with IBF[Formula: see text]Gain under 0.1, and IBF means the ions back flow ratio of the detector. The pixel TPC is a potential option to replace the traditional MPGDs with the low gain, low occupancy, and outstanding pattern recognition. Finally, some update parameters and experiments results were compared.

Performance of TPC Detector Prototype Integrated with UV Laser Tracks for the Circular Collider

Erratum: Development of Time Projection Chamber prototype integrated with UV laser tracks for the future circular e<sup>+</sup>e<sup>-</sup> collider

Progress of High Precision TPC Detection Technology for the Future Circular E+e-Collider

Status and prospects of TPC module and prototype at high luminosity <i>Z</i> physics on CEPC

Feasibility Study of TPC Tracker Detector for the Circular Collider

Performance of the continuous ions suppression TPC prorotype for circular collider

Feasibility Study of TPC Detector at High Luminosity Z Pole on the Circular Collider

Beam Test of a Monolithic Active Pixel Sensor for the CEPC Vertex Detector

Performance Study of a GEM-TPC Prototype Using Cosmic Rays

A Time Projection Chamber with GEM-based Readout

Beam test of a baseline vertex detector prototype for CEPC

A Novel Method to Measure the De/dx Resolution of a TPC Prototype Using 266 Nm UV Laser

A Prototype Combination TPC Cherenkov Detector with GEM Readout for Tracking and Particle Identification and its Potential Use at an Electron Ion Collider

Design And Construction Of A Tpc Prototype Based On Gem Detector Readout

Laser Test of the Prototype of CEE Time Projection Chamber

Simulation and reconstruction of particle trajectories in the CEPC drift chamber

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

Data Acquisition System for CEPC Vertex Detector Prototype

The Discussion on Time Projection Chamber (TPC) Based Upon GEM Detector

Performance Study of a Novel Sampling TPC Prototype Detector Based on THGEM

Study of a TPC Prototype with GEM Readout