Abstract:Abstract The Circular Electron Positron Collider (CEPC) has been proposed as a Higgs and a high luminosity Z factory in the last few years. The baseline detector concept design consists of a Time Projection Chamber (TPC) as the main tracker detector, which needs the high precision spatial resolution of approximately 100 μm in rφ direction over the whole the drift length. There will be no power-pulsing mode in the future circular colliders, the specific limitations of the detector requirements should be considered at the high luminosity Z pole. Several critical issues remain regarding the TPC R&D. The physics goals require particle identification (PID) resolution to be considered using the cluster counting method. The updated simulation results of the PID resolution demonstrate the potential of TPC technology to fit Z-pole running at CEPC. To meet the physics requirements for the tracker detector in CEPC, a TPC prototype integrated with an ultraviolet laser track system has been developed. The prototype consists of several horizontal laser tracks around the TPC detector chamber with a drift length of 500 mm, the fast electronics readout of 1280 channels, a 20000 V field-cage, a double-layer GEM detector with 200 × 200 mm 2 active area and a DAQ system. The spatial resolution, dE/dx resolution, and drift velocity were studied and analyzed using the TPC prototype and the 266 nm UV laser tracks. Some updated experimental results, including the spatial resolution, the laser track reconstruction, and dE/dx resolution have been obtained. By using the pseudo full-length track to evaluate the full-size TPC with 220 layers at CEPC, the dE/dx resolution was estimated to be about 3.4%. All results indicates that this TPC prototype integrated with UV laser tracks has been successfully developed to meet the updated CEPC physics requirements.

A Novel Method to Measure the De/dx Resolution of a TPC Prototype Using 266 Nm UV Laser

Performance of TPC Detector Prototype Integrated with UV Laser Tracks for the Circular Collider

Erratum: Development of Time Projection Chamber prototype integrated with UV laser tracks for the future circular e<sup>+</sup>e<sup>-</sup> collider

Measurement Of Energy Resolution For TES Microcalorimeter With Optical Pulses

Beam Test of a Monolithic Active Pixel Sensor for the CEPC Vertex Detector

Design of a Neutron-Tpc Prototype and Its Performance Evaluation Based on an Alpha-Particle Test

Development of a Semi-Cylindrical Time Projection Chamber Prototype for ( ^3he,t ) Charge Exchange Reaction Experiment

Progress of High Precision TPC Detection Technology for the Future Circular E+e-Collider

The uTPC Method: Improving the Position Resolution of Neutron Detectors Based on MPGDs

Laser Test of the Prototype of CEE Time Projection Chamber

Status and prospects of TPC module and prototype at high luminosity <i>Z</i> physics on CEPC

Development of a semi-cylindrical time projection chamber prototype for ( ) charge exchange reaction experiment

Development of a semi-cylindrical time projection chamber prototype for ( $$^{3}{\textrm{He}},t$$ 3 He , t ) charge exchange reaction experiment

Analysis and Optimization of Energy Resolution of Neutron-Tpc

Optimization Study of the Drift Field for TPC Detector in CEPC

Performance Study of a GEM-TPC Prototype Using Cosmic Rays

A Multi-Channel Distributed DAQ for N-Tpc

Performance Study of the Neutron-Tpc

Performance of the continuous ions suppression TPC prorotype for circular collider

Construction and Test of a Transition-Radiation Detector Prototype Based on Thick Gas Electron Multiplier Technology

High resolution gamma ray detection in a dual phase xenon time projection chamber