Abstract:In this paper, a comprehensive methodology for characterizing the high power resonance behavior of bulk piezoelectric ceramics using the burst method is described. In the burst method, the sample is electrically driven at its resonance frequency, and then either a short circuit or an open circuit condition is imposed, after which the vibration decays at the resonance or antiresonance frequency, respectively. This decay can be used to measure the quality factor in either of these conditions. The resulting current in the short circuit vibration condition is related to the vibration velocity through the "force factor." The generated voltage in the open circuit vibration condition corresponds to the displacement by the "voltage factor." The force factor and the voltage factor are related to material properties and physical dimensions of the sample. Using this method, the high power behavior of the permittivity, compliance, piezoelectric charge constant, electromechanical coupling factor, and material losses can be determined directly by measuring the resonance (short circuit) and antiresonance (open circuit) frequencies, their corresponding quality factors, the force factor $A$, and the voltage factor $B$. The experimental procedure to apply this method is described and demonstrated on commercially available hard and semi-hard PZT materials of $k_{31}$
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to accurately measure the properties of piezoelectric materials under high - power conditions. Specifically, the paper proposes a method that uses the burst/transient method combined with resonance and anti - resonance analysis to comprehensively characterize the resonance behavior of bulk piezoelectric ceramics under high - power conditions. This method can directly measure properties such as the dielectric constant, compliance, piezoelectric charge constant, electromechanical coupling factor, and material loss of the material. These properties are crucial for understanding the performance of piezoelectric materials in practical applications.
### Core Problems of the Paper
1. **Measurement of Material Properties under High - Power Conditions**
- Traditional measurement methods may not accurately reflect the real properties of materials in a high - power environment. Therefore, a method that can effectively measure the properties of piezoelectric materials under high - power conditions is required.
- The paper proposes using the burst method. By driving the sample at the resonance frequency and then applying short - circuit or open - circuit conditions, the properties of the material are measured.
2. **Resonance and Anti - Resonance Analysis**
- In the burst method, the sample is driven at the resonance frequency and then a short - circuit condition is applied, and the vibration will decay at the resonance frequency; if an open - circuit condition is applied, the vibration will decay at the anti - resonance frequency.
- By measuring these decay processes, the quality factor of the material, as well as the force factor and the voltage factor, can be calculated, and then various characteristic parameters of the material can be deduced.
3. **New Analysis Methods**
- For the first time, the paper derives in detail the expressions of the force factor \( A_{31} \) and the voltage factor \( B_{31} \), and discusses how to extract important parameters such as the dielectric constant, the piezoelectric charge constant, and the electromechanical coupling factor from these factors.
- These new analysis methods help to more accurately understand the behavior of piezoelectric materials under high - power conditions, especially their performance under resonance and anti - resonance conditions.
### Specific Problems and Solutions
- **Problem**: How to accurately measure the properties of piezoelectric materials under high - power conditions?
- **Solution**: Use the burst/transient method. Through resonance and anti - resonance analysis, directly measure properties such as the dielectric constant, compliance, piezoelectric charge constant, electromechanical coupling factor, and material loss of the material.
- **Problem**: How to derive the expressions of the force factor \( A_{31} \) and the voltage factor \( B_{31} \)?
- **Solution**: By establishing the constitutive equations of piezoelectric materials and combining the experimental data under resonance and anti - resonance conditions, the expressions of the force factor and the voltage factor are derived.
- **Problem**: How to deal with the temperature effect and other interference factors in the experiment?
- **Solution**: The paper describes in detail the experimental device and data acquisition method, ensuring that the measurement is completed within a low driving time (usually less than 10 milliseconds), thereby avoiding the influence of temperature rise on the results. At the same time, through multiple measurements and data averaging, random errors are reduced.
### Conclusion
This paper provides a comprehensive method for measuring the properties of piezoelectric materials under high - power conditions. Through the burst/transient method combined with resonance and anti - resonance analysis, the performance of materials in practical applications can be more accurately characterized. These methods and analysis means are not only helpful for scientific research, but also provide important technical support for industrial applications.