Abstract:Signal to noise ratios (SNR) in magnetic resonance microscopy images are limited by acquisition times and the decreasing number of spins in smaller voxels. Significant SNR gains from cooling of the RF receiver are only realized when the Johnson noise generated within the RF hardware is large compared to the electromagnetic noise produced by the sample. Cryogenic cooling of imaging probes is common in high field systems but proves difficult to insulate the sample from extreme temperatures. We designed a chamber to cool only the tune and match circuitry to show it is possible to achieve much of the available SNR gain available for cooled coils. We designed a microcoil circuit to resonate at 650 MHz for imaging on a 15.2 T scanner. Surface loops and solenoids of varying diameters were tested to determine the largest diameter coil that demonstrated significant SNR gains from cooling. A liquid N2 cryochamber was designed to cool the circuitry while leaving the RF coil in ambient air. As the cryochamber was filled with liquid N2, Q-factors were measured on the bench while monitoring the coil's surface temperature. Improvements of SNR on images of solutions were demonstrated via cooling the tune and match circuit in the magnet bore. At 650 MHz, loops and solenoids < 3 mm in diameter showed significant improvements in quality factor on the bench. The resistance of the variable capacitors and the coaxial cable were measured to be 45% and 32% of room temperature values near the Larmor frequency. Images obtained with a 2 turn, 3 mm diameter loop with the matching circuit at room temperature and then cooled with liquid nitrogen demonstrated SNR improvements of a factor of 2. By cooling the tune and match circuit and leaving the surface loop in ambient air, SNR was improved by a factor of 2. The results are significant because it allows for more space to insulate the sample from extreme temperatures.

Vibration-induced electrical noise in a cryogen-free dilution refrigerator: characterization, mitigation, and impact on qubit coherence

Reducing current noise in cryogenic experiments by vacuum-insulated cables

Vibration isolation with high thermal conductance for a cryogen-free dilution refrigerator

Isolation solution for extreme environmental vibrations for quantum-enabling cryogenic setups installed on raised frames

A 10 mK hermetic cell for eliminating parasitic heating in cryogen-free dilution refrigerators

Vibrations on pulse tube based Dry Dilution Refrigerators for low noise measurements

Cryogenic broadband vibration measurement on a cryogen-free dilution refrigerator

Development of 400-μW cryogen-free dilution refrigerators for quantum experiments

Characterization of Two Fast-Turnaround Dry Dilution Refrigerators for Scanning Probe Microscopy

Scanning SQUID microscopy in a cryogen-free cooler

Vibration Property of a Cryogenic Optical Resonator within a Pulse-Tube Cryostat

Noise-induced quantum-circuit refrigeration

A Cryogenic Tune and Match Circuit for Magnetic Resonance Microscopy at 15.2T

Versatile Millikelvin Hybrid Cooling Platform for Superconductivity Research

Vibration decoupling system for massive bolometers in dry cryostats

Recent Developments in Quantum-Circuit Refrigeration

Thermal coupling of silicon oscillators in cryogen-free dilution refrigerators

Development of a cryogen-free dilution refrigerator

Calibrated transmission and reflection from a multi-qubit microwave package

Engineering the microwave to infrared noise photon flux for superconducting quantum systems