Abstract:We present a procedure for the design and construction of a passive, multipole, mechanical high-stop vibration isolator. The isolator, consisting of a stack of metal disks connected by thin wires, attenuates frequencies in the kilohertz range, and is suited to both vacuum and cryogenic environments. We derive an approximate analytical model and compare its predictions for the frequencies of the normal modes to those of a finite element analysis. The analytical model is exact for the modes involving only motion along and rotation about the longitudinal axis, and it gives a good approximate description of the transverse modes. These results show that the high-frequency behavior of a multi-stage isolator is well characterized by the natural frequencies of a single stage. From the single-stage frequency formulae, we derive relationships among the various geometrical parameters of the isolator to guarantee equal attenuation in all degrees of freedom. We then derive expressions for the attenuation attainable with a given isolator length, and find that the most important limiting factor is the elastic limit of the spring wire material. For our application, which requires attenuations of 250 dB at 1 kHz, our model specifies a six-stage design using brass disks of approximately 2 cm in both radius and thickness, connected by 3 cm steel wires of diameters ranging from 25 to 75 microns. We describe the construction of this isolator in detail, and compare measurements of the natural frequencies of a single stage with calculations from the analytical model and the finite element package. For translations along and rotations about the longitudinal axes, all three results are in agreement to within 10% accuracy.

Isolation solution for extreme environmental vibrations for quantum-enabling cryogenic setups installed on raised frames

Vibration isolation with high thermal conductance for a cryogen-free dilution refrigerator

Vibration decoupling system for massive bolometers in dry cryostats

Vibration Control for Mechanical Cryocoolers

Vibration-induced electrical noise in a cryogen-free dilution refrigerator: characterization, mitigation, and impact on qubit coherence

Low-vibration cryogenic test facility for next generation of ground-based gravitational-wave observatories

Closed-cycle, low-vibration 4 K cryostat for ion traps and other applications

Performance benchmarking of an ultra-low vibration laboratory to host a commercial millikelvin scanning tunnelling microscope

Low Vibration Laboratory with a Single-Stage Vibration Isolation for Microscopy Applications

Embedded Active Vibration Cancellation of a Piston-Driven Cryocooler for Nuclear Spectroscopy Applications

A compact actively damped vibration isolation platform for optical experiments in ultra-high vacuum

Versatile Millikelvin Hybrid Cooling Platform for Superconductivity Research

Taber Vibration Isolator for Vacuum and Cryogenic Applications

Characterization of Two Fast-Turnaround Dry Dilution Refrigerators for Scanning Probe Microscopy

Design and characterization of a low-vibration laboratory with cylindrical inertia block geometry

A Wireless Passive Vibration Sensing Method for Cryogenic Applications

A 10 mK hermetic cell for eliminating parasitic heating in cryogen-free dilution refrigerators

A mechanically stable and tunable cryogenic Fabry-Perot microcavity

Ultra-stable dry cryostat for variable temperature break junction

Cryogenic cooling with cryocooler on a rotating system