Abstract:Porous ceramics can be used in various industrial applications, such as thermal insulation, orthopedic implants, high-temperature filtration, lightweight structural components, and catalyst supports, etc., and can be obtained using various methods. In this study, the sacrificial fugitive method was used to prepare a porous alumina ceramic. The appropriate amount of sacrificial fugitive was combined with raw ceramic powder as a pore-forming agent, and was then evaporated or burned out either before or during the sintering process to create the desired pores. Various materials can be used as pore-forming agents; in this work, eco-friendly waste coffee grounds (WCG) were utilized. First, alumina ceramic green bodies were prepared via slip casting of 60 wt. % alumina suspensions with five different amounts of WCG (0 wt. %, 1 wt. %, 5 wt. %, 10 wt. % and 15 wt. %) and the dispersant Dolapix (0.2 wt. %), and using PVA (0.5 wt. %) as a binder for all solutions. The effect of the various amounts of WCG on the alumina ceramic green bodies, and subsequently on the obtained sintered ceramics, was tracked and validated through different analyses. Suspension viscosity was determined through a rotational viscometer. Simultaneous differential thermal and thermogravimetric (DTA/TGA) analyses were used to observe the thermal decomposition of WCG and to determine the sintering regime. After sintering, the density, porosity, and shrinkage of the samples were examined and calculated. In addition, the phase composition and crystallite size of all sintered samples were determined by powder X-ray diffraction (PXRD) analysis, as well as their morphology and composition using Scanning Electron Microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS). The results show that density decreased from 3.743 to 2.172 g/cm3 and porosity increased from 6.12% to 45.52%, both with the increasing amount of WCG (from 0 wt. % to 15 wt. %).

Fabrication of Porous Anorthite Ceramic Insulation Using Solid Wastes

Anisotropic Porous Ceramic Material with Hierarchical Architecture for Thermal Insulation

Eco‐friendly preparation and structural characterization of calcium silicates derived from eggshell and silica gel

Porous MgO-based ceramics synthesized by the volume expansion effect: Designing and performance

Porous anorthite ceramics with ultra-low thermal conductivity

Fabrication and properties of porous anorthite/mullite ceramics

Self-reinforced and eco-friendly porous MgO-based ceramics from magnesite tailings: The effect of La2O3 and firing temperature

Preparation and thermal shock resistance of anorthite solar thermal energy storage ceramics from magnesium slag

Impact of Distinct Ca$^{2+}$ Sources on the Physical Properties of Alumina-based Macroporous Refractories for Thermal Insulation at High Temperature

Preparation of porous ceramics with waste zeolites as raw material

A novel strategy for low-temperature fabrication of porous CA 6 ceramics using reactive CaCl 2 -KCl medium and its influence mechanism

Fabrication of foamed ceramics with enhanced compressive strength and low thermal conductivity via a simple route

Reusing Waste Coffee Grounds in the Preparation of Porous Alumina Ceramics

Thermal properties of mullite based porous ceramics derived from high silica tailings obtained after extracting alumina from high alumina coal ash

Low‐temperature preparation of high‐performance porous ceramics composed of anorthite platelets

Preparation of Thermal Insulation Ceramics Using Felsic Tailings as Main Raw Material and Soda-ash Dregs as Flux

Hierarchically porous Al2TiO5 ceramics via freeze-gel casting

Fundamental study on the preparation of insulating ceramics via the phase reconstruction of phosphate tailings

Study on Preparation of Porous Light Refractory from Waste Electric Porcelain

Preparation and characteristics of porous anorthite ceramics with high porosity and high‐temperature strength

Utilization of both Electronical Manganese Slag and Silicate Tailings as Raw Materials for Fabrication of Cost-effective Porous Ceramics