Preparation and characterization of porous anorthite ceramics from red mud and fly ash
Weiheng Xiang,Qingjun Ding,Gaozhan Zhang
DOI: https://doi.org/10.1111/ijac.13148
2019-04-13
International Journal of Applied Ceramic Technology
Abstract:Abstract The porous anorthite ceramics with high porosity, good mechanical strength and low heat conductivity were prepared using red mud and fly ash as raw materials via the pore forming method. The effects of sintering temperature and fly ash on phase evolution, densification, compressive strength, thermal conductivity and microstructure of the ceramic materials were investigated. The results showed that the compressive strength of the porous ceramics had an obvious improvement with the increase in fly ash, and the densification and heat conductivity decreased firstly and then increased. In particular, specimen S2 containing 30 wt% red mud and 40 wt% fly ash sintered at 1150°C had the better performances. It had the water absorption of 18.18%, open porosity of 38.52%, bulk density of 1.29 g/cm 3 , compressive strength of 42.46 MPa, and heat conductivity of 1.24 W/m·K. X‐ray diffraction analysis indicated that mullite, anorthite, α‐quartz, and diopside ferrian were the dominant phases in the specimens. Scanning electron microscopy micrographs illustrated that plenty of open pores with strip shape and closed pores with axiolitic shape existed in the specimens. Furthermore, the existence of mullite could prevent crack propagation to enhance the energy of inter‐granular fracture. It endowed the porous anorthite ceramics with high porosity, good compressive strength, and low heat conductivity.
materials science, ceramics