Abstract:Precision phase readout of optical beat note signals is one of the core techniques required for intersatellite laser interferometry. Future space based gravitational wave detectors like eLISA require such a readout over a wide range of MHz frequencies, due to orbit induced Doppler shifts, with a precision in the order of $\mu \textrm{rad}/\sqrt{\textrm{Hz}}$ at frequencies between $0.1\,\textrm{mHz}$ and $1\,\textrm{Hz}$. In this paper, we present phase readout systems, so-called phasemeters, that are able to achieve such precisions and we discuss various means that have been employed to reduce noise in the analogue circuit domain and during digitisation. We also discuss the influence of some non-linear noise sources in the analogue domain of such phasemeters. And finally, we present the performance that was achieved during testing of the elegant breadboard model of the LISA phasemeter, that was developed in the scope of an ESA technology development activity.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to measure the low - frequency phase fluctuations of high - frequency signals with micro - radian precision in inter - satellite laser interferometry. Specifically, future space - based gravitational wave detectors (such as eLISA) need to perform high - precision phase read - out over a wide frequency range (due to the Doppler shift caused by the orbit), requiring an accuracy on the order of micro - radians per square root of hertz (µrad/√Hz) at frequencies between 0.1 mHz and 1 Hz. The paper introduces several phase read - out systems (called phase meters) that can achieve this precision and discusses various methods for reducing noise in the analog circuit domain and during the digitization process. In addition, it also explores the influence of some non - linear noise sources on the performance of the phase meter and shows the performance achieved by the LISA phase meter in the elegant breadboard model in the test. ### Core Problems of the Paper 1. **High - Precision Phase Read - out**: How to achieve micro - radian - level phase measurement precision in the MHz frequency range. 2. **Noise Suppression**: How to reduce noise in the analog circuit and digital conversion processes, especially noise at the low - frequency band (mHz level). 3. **Non - linear Effects**: How to understand and mitigate the influence of non - linear noise sources in the analog front - end on phase measurement. ### Key Technical Points - **Phase Read - out Chain**: The entire signal processing chain from photoelectric detection to the phase meter. - **Analog - to - Digital Conversion (ADC)**: The influence of sampling frequency and ADC bit depth on quantization noise and aliasing. - **Analog Front - End (AFE)**: Signal conditioning, anti - aliasing filtering, reference signal (pilot tone) distribution, etc. - **Non - linear Noise**: The influence of small vector noise, crosstalk, analog reflection, etc. on phase measurement. ### Main Contributions - **Phase Meter Design**: Proposed several phase meter prototypes capable of achieving high - precision phase measurement. - **Noise Analysis**: Analyzed various noise sources and their influence on phase measurement in detail. - **Experimental Verification**: Verified the performance of the phase meter through experiments, especially its performance in the frequency range required for the LISA mission. ### Conclusion Through theoretical analysis and experimental verification, the paper shows how to design and optimize the phase meter to meet the high - precision phase measurement requirements of future space - based gravitational wave detectors. It pays special attention to noise suppression at the low - frequency band (mHz level) and the handling of non - linear effects, providing important technical support for future space science missions.

Readout for intersatellite laser interferometry: Measuring low frequency phase fluctuations of HF signals with microradian precision

Readout for intersatellite laser interferometry: Measuring low frequency phase fluctuations of high-frequency signals with microradian precision

Phasemeter core for intersatellite laser heterodyne interferometry: modelling, simulations and experiments

Optical testbed for the LISA phasemeter

Ranging and phase measurement for LISA

Sub-pm/$\mathrm{\mathbf{\sqrt{\rm Hz}}}$ non-reciprocal noise in the LISA backlink fiber

Utilizing multi-point temperature sensing to evaluate the low frequency noise of phasemeter for intersatellite laser interferometer

Fundamental Performance Determining Factors of the Ultrahigh-Precision Space-Borne Optical Metrology System for the LISA Pathfinder mission

Optimizing the architecture for coherent beat note acquisition in LISA

Compensation of front-end and modulation delays in phase and ranging measurements for time-delay interferometry

Deep frequency modulation interferometry

Advanced phasemeter for deep phase modulation interferometry.

Picometer-stable hexagonal optical bench to verify LISA phase extraction linearity and precision

Experimental end-to-end demonstration of intersatellite absolute ranging for LISA

Laser-Frequency Stabilization via a Quasimonolithic Mach-Zehnder Interferometer with Arms of Unequal Length and Balanced dc Readout

Experimental verification of clock noise transfer and components for space based gravitational wave detectors

Sensor noise in LISA Pathfinder : An extensive in-flight review of the angular and longitudinal interferometric measurement system

An analytic, efficient and optimal readout algorithm for compact interferometers based on deep frequency modulation

Experimental verification of intersatellite clock synchronization at LISA performance levels

Sensor noise in : Laser frequency noise and its coupling to the optical test mass readout