Abstract:The authors report on the real-time monitoring of self-limiting aluminum nitride growth process by using multiwavelength in situ ellipsometry. Aluminum nitride (AlN) thin films were grown on Si(100) substrates via hollow-cathode plasma-assisted atomic layer deposition (HCPA-ALD) using trimethylaluminum (TMA) and Ar/N2/H2 plasma as metal precursor and coreactant, respectively. Growth saturation experiments within 100–250 °C temperature range were carried out without interruption as extended single runs featuring 10-cycle subruns for each parameter change. The sensitivity of the multiwavelength ellipsometry provided sufficient resolution to observe not only the minuscule changes in the growth-per-cycle (GPC) parameter, but also the single chemical adsorption (chemisorption) and plasma-assisted ligand removal events. GPC values showed a slight increasing slope within 100–200 °C, followed by a stronger surge at 250 °C, signaling the onset of thermal decomposition. The real-time dynamic in situ monitoring revealed mainly the following insights into the HCPA-ALD process of AlN: (i) film growth rate and TMA chemisorption amount exhibited plasma power dependent saturation behavior, which was also correlated with the substrate temperature; (ii) time-dependent refractive index evolution indicated a nonconstant relationship: a faster increase within the first ∼100 cycles followed by a slower increase as the AlN film gets thicker; and (iii) a considerable improvement in crystallinity was observed when the substrate temperature exceeded 200 °C. Besides in situ optical characterization, ex situ optical, structural, and chemical characterization studies were also carried out on 500-cycle grown AlN films as a function of substrate temperature. All AlN samples displayed a single-phase wurtzite polycrystalline character with no detectable carbon and relatively low (<5%) oxygen content within the bulk of the films. Moreover, regardless of the deposition temperature, HCPA-ALD grown AlN films exhibited highly stoichiometric elemental composition.

Spotting 2-D Atomic Layers on Aluminum Nitride Thin Films

2D AlN Layers Sandwiched Between Graphene and Si Substrates

Optical and Structural Properties of Aluminum Nitride Epi-Films at Room and High Temperature

Epitaxial AlN film with improved quality on Si (111) substrates realized by boron pretreatment via MOCVD

Real-time in situ ellipsometric monitoring of aluminum nitride film growth via hollow-cathode plasma-assisted atomic layer deposition

Fabrication of Aln Thin Films on Different Substrates at Ambient Temperature

Novel Porous Aluminum Nitride Monolayer Structures A First-principles Study

Sublimation Growth of Aluminum Nitride on Silicon Carbide Substrate with Aluminum Nitride–silicon Carbide Alloy Transition Layer

Comparison of aluminum nitride thin films prepared by magnetron sputter epitaxy in nitrogen and ammonia atmosphere

Synthesis and Properties of Aluminum Nitride Nanostructures

Surface chemistry in atomic layer deposition of AlN thin films from Al(CH3)3 and NH3 studied by mass spectrometry

Thick adherent diamond films on AlN with low thermal barrier resistance

Study On the Uniformity Aluminum Nitrate Thin Film On 2-Inch Silicon Substrate Prepared by RF Magnetron Sputtering

AlN Thin Films Grown on Different Substrates by Metal Nitride Vapor Phase Epitaxy

Structure and Optical Properties of AlN Crystals Grown by Metal Nitride Vapor Phase Epitaxy with Different V/III Ratios.

Study of AlN Epitaxial Growth on Si (111) Substrate Using Pulsed Metal–Organic Chemical Vapour Deposition

Growth of Aluminum Nitride on a Silicon Nitride Substrate for Hybrid Photonic Circuits

Characterisation of Aluminium Nitride Films and Surface Acoustic Wave Devices for Microfluidic Applications

Surface Preparation and Homoepitaxial Deposition of AlN on (0001)-Oriented AlN Substrates by Metalorganic Chemical Vapor Deposition

van der Waals epitaxy of 2D h -AlN on TMDs by atomic layer deposition at 250 °C

Resolving Impurities in Atomic Layer Deposited Aluminum Nitride through Low Cost, High Efficiency Precursor Design