Abstract:A full-scale 120 m path length ITER toroidal interferometer and polarimeter (TIP) prototype, including an active feedback alignment system, has been constructed and undergone initial testing at General Atomics. In the TIP prototype, two-color interferometry is carried out at 10.59 μm and 5.22 μm using a CO2 and quantum cascade laser (QCL) respectively while a separate polarimetry measurement of the plasma induced Faraday effect is made at 10.59 μm. The polarimeter system uses co-linear right and left-hand circularly polarized beams upshifted by 40 and 44 MHz acousto-optic cells respectively, to generate the necessary beat signal for heterodyne phase detection, while interferometry measurements are carried out at both 40 MHz and 44 MHz for the CO2 laser and 40 MHz for the QCL. The high-resolution phase information is obtained using an all-digital FPGA based phase demodulation scheme and precision clock source. The TIP prototype is equipped with a piezo tip/tilt stage active feedback alignment system responsible for minimizing noise in the measurement and keeping the TIP diagnostic aligned indefinitely on its 120 m beam path including as the ITER vessel is brought from ambient to operating temperatures. The prototype beam path incorporates translation stages to simulate ITER motion through a bake cycle as well as other sources of motion or misalignment. Even in the presence of significant motion, the TIP prototype is able to meet ITER’s density measurement requirements over 1000 s shot durations with demonstrated phase resolution of 0.06° and 1.5° for the polarimeter and vibration compensated interferometer respectively. TIP vibration compensated interferometer measurements of a plasma have also been made in a pulsed radio frequency device and show a line-integrated density resolution of δ nL = 3.5 × 10 17 m−2.

Relativistic effects on reconstruction of density profiles via reflectometry in ITER and potential for electron temperature measurements

Microwave Reflectometry for Plasma Density Profile Measurements on Hl-2a Tokamak

Kinetic Equilibrium Reconstruction on EAST Tokamak

Electron Kinetic Effects on Optical Diagnostics in Fusion Plasmas

Electron Kinetic Effects on Interferometry, Polarimetry and Thomson Scattering Measurements in Burning Plasmas (Invited).

Electron Kinetic Effects on Interferometry and Polarimetry in High Temperature Fusion Plasmas

Model-based electron density profile estimation and control, applied to ITER

Determination of the Radial Position of Zero Density for Profile Reflectometry on Experimental Advanced Superconducting Tokamak

Finite Electron Temperature Effects on Interferometric and Polarimetric Measurements in Fusion Plasmas

Combined Analysis of Laser Interferometer and Microwave Reflectometer for a Consistent Electron Density Profile on HL-2A

Conceptual Design of the Tangentially Viewing Combined Interferometer-Polarimeter for Iter Density Measurements

Detecting Neoclassical Tearing Modes in high-temperature ITER plasma scenarios with the ITER prototype Electron Cyclotron Emission Diagnostic

Plasma Position Measurements by O-mode and X-mode Reflectometry Systems in Tokamak Plasmas.

Assessing global beryllium erosion via tomographic reconstruction of 3D beryllium emission profiles in ITER

Reconstruction algorithm for the runaway electron energy distribution function of the ITER hard x-ray monitor

Effect of Plasma Shape on Electron Heat Transport in the Presence of Extreme Temperature Gradients Variations in TCV

Plasma electron density profile tomography for EAST based on integrated data analysis

Error Field Predictability and Consequences for ITER

Tests of a Two-Color Interferometer and Polarimeter for ITER Density Measurements