Abstract:Highlights • CMS membranes derived from phenolic resin cured in various curing conditions in terms of curing time and concentration of curing agent were prepared for propylene/propane separation. • The longer curing time and higher concentration of curing agent provided the higher crosslinking degree and thermal stability. • The CMS membranes derived from the more crosslinked phenolic resin showed the smaller pore structure. • Controlling the crosslinking degree during curing process improved the physical aging resistance as well as propylene/propane separation factor. A carbon molecular sieve (CMS) membrane was prepared for propylene/propane separation using a phenolic resin as a cost-effective polymer precursor. However, to achieve a desirable separation performance, the pre-treatment process of phenolic resin should be affordably carried out. In this study, novolac phenolic resin was cured with hexamine as a curing agent. The curing conditions were varied in terms of the curing time and concentration of the curing agent, both of which led to a higher degree of crosslinking of the phenolic resin, resulting in improved thermal stability. The propylene/propane separation factor of 6.33 for the CMS membrane derived from the phenolic resin cured for 1 h increased to 18.5 when the curing time was 4 h, whereas the propylene permeance decreased from 153 to 53.5 GPU. A similar trend was observed for higher concentrations of the curing agent. Moreover, the long-term stability of the CMS membrane was significantly improved after prolonged curing with a higher concentration of the curing agent. The CMS membranes derived from cured phenolic resins possess more selective carbon structures and better structural stabilities. Graphical abstract Download : Download high-res image (183KB) Download : Download full-size image

Controlling the Curing Process of Novolac Phenolic Resin during Preparation of Carbon Molecular Sieve Membrane for Propylene/Propane Separation

Aging-resistant carbon molecular sieve membrane derived from pre-crosslinked Matrimid® for propylene/propane separation

Tailoring the Stabilization and Pyrolysis Processes of Carbon Molecular Sieve Membrane Derived from Polyacrylonitrile for Ethylene/Ethane Separation

Synergistic Tuning of Microstructure and Morphology in Carbon Molecular Sieve Hollow Fibers for Propylene/Propane Separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Carbon Molecular Sieve Gas Separation Membranes Derived from In-Situ Crosslinked Polyimide Containing Bromine Groups

Carbon Molecular Sieve Membranes Derived from Thermally Labile Polymer Containing Blend Polymers and Their Gas Separation Properties

In-situ crosslinking of a novel conjugated dialkynyl-based polyimide for high performance carbon molecular sieve membrane

Pyrolysis temperature-regulated gas transport and aging properties in 6FDA-DAM polyimide-derived carbon molecular sieve membranes

Controlled Superacid-Catalyzed Self-Cross-Linked Polymer of Intrinsic Microporosity for High-Performance CO2 Separation

A Review on Polymer Precursors of Carbon Molecular Sieve Membranes for Olefin/Paraffin Separation

Preparation and Characterization of Carbon Molecular Sieve Membranes Derived from BTDA–ODA Polyimide and Their Gas Separation Properties

High-performance carbon molecular sieve membrane for C2H4/C2H6 separation: Molecular insight into the structure-property relationships

Preparation of carbon molecular sieve membrane derived from phenolic resin over macroporous clay-alumina based support for hydrogen separation

High-Performance Carbon Molecular Sieve Membrane Derived from a Crown Ether-Containing Co-Polyimide Precursor for Gas Separation

Post‐synthesis Amination of Polymer of Intrinsic Microporosity Membranes for CO2 Separation

Tailoring the properties of carbon molecular sieves membranes for the separation of propionic acid from aqueous solutions

PI/NCC- based carbon molecular sieve membranes for Hydrogen purification: Effect of aging times

High-performance carbonized ZIF-8-doped hybrid carbon molecular sieve membrane for CO2/N2 separation

Surface modification effect of carbon molecular sieve (CMS) on the morphology and separation performance of mixed matrix membranes

Effect of Cross-Link Density on Carbon Dioxide Separation in Polydimethylsiloxane-Norbornene Membranes