Abstract:Nucleophile oxidation reaction (NOR) is emerging as a significant approach for the sustainable production of value-added chemicals. Among the various types, electrocatalytic glycerol oxidation reaction (GOR) stands out as a crucial method for producing C-1 to C(3 )chemicals including formic acid (FA). Non-noble-metal-based (oxy)hydroxides have found extensive use in GOR, yet achieving industrially-demanded current densities (> 300 mA.cm(-2) ) at moderate potentials remains a challenge. It is well documented that GOR catalyzed by (oxy)hydroxides follows an indirect oxidation mechanism. Specifically, the nucleophile, glycerol, undergoes oxidation by the electrogenerated oxyhydroxides with electrophilic adsorption oxygen. Therefore, comprehending the evolution of the electrocatalyst in GOR is critically important. In this paper, we have developed molybdenum-doped nickel oxyhydroxides (Mo-NiOOH) through cyclic voltammetry (CV) activation of nickel molybdate (NiMoO4 ). We demonstrated that Mo species leach from NiMoO4, and the resulting Mo-NiOOH retains the nanosheet array morphology of NiMoO4. We subjected the freshly prepared Mo-NiOOH to systematic characterizations employing techniques such as scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) mapping, Raman spectroscopy, inductively coupled plasma-mass spectrometry (ICP-MS), and X-ray photoelectron spectroscopy (XPS). The above structural characterizations confirm that Mo-NiOOH inherits the nanosheet array morphology of the NiMoO4 precursor with reduced Mo content, thereby indicating the phase reconstruction from oxides to oxyhydroxides post CV activation. Furthermore, the Ni3+/Ni2+ ratio in Mo-NiOOH surpasses that in NiOOH derived from CV activation of Ni(OH)(2). Mo-NiOOH exhibits elevated electrochemically active surface areas (ECSAs) and a higher Ni3+/Ni2+ ratio compared to NiOOH obtained through CV activation of Ni(OH)(2,) facilitating the Mo-NiOOH exhibits higher ratio of Ni3+/Ni2+, higher electrochemically active surface areas (ECSAs) than NiOOH, and facilitated oxidation of Ni2+ to Ni 3+ . Consequently, Mo-NiOOH requires a lower applied potential than NiOOH (1.51 V versus 1.84 V vs . reversible hydrogen electrode (RHE)) to achieve a high current density (400 mA.cm(-2) ). Additionally, Mo-NiOOH demonstrates higher Faradaic efficiency towards formate (FEformate ) in contrast to NiOOH (84.7% versus 59.6%), indicating enhanced carbon- carbon (C & horbar;C) bond cleavage due to Mo doping. Multi-potential step (STEP) experiments indicate that GOR catalyzed by NiOOH and Mo-NiOOH follows a similar indirect oxidation mechanism mediated by oxyhydroxides. Operando electrochemical impedance spectroscopy (EIS) and in situ Raman spectroscopy confirmed that Mo doping in NiOOH accelerates GOR kinetics and the oxidation of Ni2+ to Ni3+ , contributing to the higher activity and formate selectivity of Mo-NiOOH than NiOOH. The strategy of surface modulation of oxyhydroxides through leaching of soluble anions offers guidelines for the rational design of high-performance NOR electrocatalysts.

Electric Field Redistribution Triggered Surface Adsorption and Mass Transfer to Boost Electrocatalytic Glycerol Upgrading Coupled with Hydrogen Evolution

Construction of Heterogeneous Interfaces for Water Activation and Dissociation to Synergistically Boost Overall Water Splitting

MOF‐Derived FeCoO/N‐Doped C Bifunctional Electrode for H2 Production Through Water and Glucose Electrolysis

Regulation of the d-band center of metal-organic frameworks for energy-saving hydrogen generation coupled with selective glycerol oxidation

Construction of Bifunctional MOF-based Composite Electrocatalysts Promoting Oxygen Evolution Reaction and Glucose Oxidation Reaction and Its Kinetic Deciphering

Interface Synergistic Effect from Hierarchically Porous Cu(OH)2@FCN MOF/CF Nanosheet Arrays Boosting Electrocatalytic Oxygen Evolution

Metal‐Phthalocyanine‐Based Two‐Dimensional Conjugated Metal‐Organic Frameworks for Electrochemical Glycerol Oxidation Reaction

Value-added formate production from selective ethylene glycol oxidation based on cost-effective self-supported MOF nanosheet arrays

Controllable Electron Distribution Reconstruction of Spinel NiCo2O4 Boosting Glycerol Oxidation at Elevated Current Density

Heterogeneous Interface Enhanced Adsorption of Organic and Hydroxyl for Biomass Electrooxidation

High Entropy Alloy Electrocatalytic Electrode toward Alkaline Glycerol Valorization Coupling with Acidic Hydrogen Production

Trimetallic synergistic optimization of metal-organic gels as pre-electrocatalysts for efficient electrocatalytic overall water splitting

NH4Cl‐Assisted Electrosynthesis of P‐Doped Co(OH)2 Nanosheet on Cu2S Hollow Nanotube Arrays for Glycerol Electrooxidation

Molybdenum, tungsten doped cobalt phosphides as efficient catalysts for coproduction of hydrogen and formate by glycerol electrolysis

Biphasic Transition Metal Nitride Electrode Promotes Nucleophile Oxidation Reaction for Practicable Hybrid Water Electrocatalysis

Deliberate Amorphization of Co‐MOF for Constructing Crystalline‐Amorphous Heterostructures Toward High‐Performance Water Electrolysis

Promoting Electrocatalytic Glycerol C─C Bond Cleavage to Formate Coupled with H2 Production Over a CuxNi2–xP Catalyst

CoO–Co Heterojunction Covered with Carbon Enables Highly Efficient Integration of Hydrogen Evolution and 5-Hydroxymethylfurfural Oxidation

Highly efficient electrooxidation of 5-hydroxymethylfurfural (HMF) by Cu regulated Co carbonate hydroxides boosting hydrogen evolution reaction

An Anion Leaching Strategy Towards Metal Oxyhydroxides Synthesis for Electrocatalytic Oxidation of Glycerol

High-Entropy Engineering in Hollow Layered Hydroxide Arrays to Boost 5-Hydroxymethylfurfural Electrooxidation by Suppressing Oxygen Evolution