Abstract:Nucleophile oxidation reaction (NOR) is emerging as a significant approach for the sustainable production of value-added chemicals. Among the various types, electrocatalytic glycerol oxidation reaction (GOR) stands out as a crucial method for producing C-1 to C(3 )chemicals including formic acid (FA). Non-noble-metal-based (oxy)hydroxides have found extensive use in GOR, yet achieving industrially-demanded current densities (> 300 mA.cm(-2) ) at moderate potentials remains a challenge. It is well documented that GOR catalyzed by (oxy)hydroxides follows an indirect oxidation mechanism. Specifically, the nucleophile, glycerol, undergoes oxidation by the electrogenerated oxyhydroxides with electrophilic adsorption oxygen. Therefore, comprehending the evolution of the electrocatalyst in GOR is critically important. In this paper, we have developed molybdenum-doped nickel oxyhydroxides (Mo-NiOOH) through cyclic voltammetry (CV) activation of nickel molybdate (NiMoO4 ). We demonstrated that Mo species leach from NiMoO4, and the resulting Mo-NiOOH retains the nanosheet array morphology of NiMoO4. We subjected the freshly prepared Mo-NiOOH to systematic characterizations employing techniques such as scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) mapping, Raman spectroscopy, inductively coupled plasma-mass spectrometry (ICP-MS), and X-ray photoelectron spectroscopy (XPS). The above structural characterizations confirm that Mo-NiOOH inherits the nanosheet array morphology of the NiMoO4 precursor with reduced Mo content, thereby indicating the phase reconstruction from oxides to oxyhydroxides post CV activation. Furthermore, the Ni3+/Ni2+ ratio in Mo-NiOOH surpasses that in NiOOH derived from CV activation of Ni(OH)(2). Mo-NiOOH exhibits elevated electrochemically active surface areas (ECSAs) and a higher Ni3+/Ni2+ ratio compared to NiOOH obtained through CV activation of Ni(OH)(2,) facilitating the Mo-NiOOH exhibits higher ratio of Ni3+/Ni2+, higher electrochemically active surface areas (ECSAs) than NiOOH, and facilitated oxidation of Ni2+ to Ni 3+ . Consequently, Mo-NiOOH requires a lower applied potential than NiOOH (1.51 V versus 1.84 V vs . reversible hydrogen electrode (RHE)) to achieve a high current density (400 mA.cm(-2) ). Additionally, Mo-NiOOH demonstrates higher Faradaic efficiency towards formate (FEformate ) in contrast to NiOOH (84.7% versus 59.6%), indicating enhanced carbon- carbon (C & horbar;C) bond cleavage due to Mo doping. Multi-potential step (STEP) experiments indicate that GOR catalyzed by NiOOH and Mo-NiOOH follows a similar indirect oxidation mechanism mediated by oxyhydroxides. Operando electrochemical impedance spectroscopy (EIS) and in situ Raman spectroscopy confirmed that Mo doping in NiOOH accelerates GOR kinetics and the oxidation of Ni2+ to Ni3+ , contributing to the higher activity and formate selectivity of Mo-NiOOH than NiOOH. The strategy of surface modulation of oxyhydroxides through leaching of soluble anions offers guidelines for the rational design of high-performance NOR electrocatalysts.

High Entropy Alloy Electrocatalytic Electrode toward Alkaline Glycerol Valorization Coupling with Acidic Hydrogen Production

PtAu Alloying-Modulated Hydroxyl and Substrate Adsorptions for Glycerol Electrooxidation to C3 Products

Self-Supported FeCoNiCuP High-Entropy Alloy Nanosheet Arrays for Efficient Glycerol Oxidation and Hydrogen Evolution in Seawater Electrolyte

Coupling Glycerol Conversion with Hydrogen Production Using Alloyed Electrocatalysts

Electrodeposited NiFeCoMoW High-Entropy Alloys with Nanoscale Amorphous Structure As Effective Hydrogen Evolution Electrocatalysts

High-power Hybrid Alkali-Acid Fuel Cell for Synchronous Glycerol Valorization Implemented by High-Entropy Sulfide Electrocatalyst

PtAu alloying-modulated hydroxyl and substrate adsorption for glycerol electrooxidation to C3 products

Biphasic Transition Metal Nitride Electrode Promotes Nucleophile Oxidation Reaction for Practicable Hybrid Water Electrocatalysis

Anodic glycerol oxidation to formate facilitating cathodic hydrogen evolution with earth-abundant metal oxide catalysts

Cobalt (II) Oxide for Efficient Glycerol Electrooxidation for Formic Acid Coupled with Hydrogen Production

Electrocatalytic Glycerol Oxidation with Concurrent Hydrogen Evolution Utilizing an Efficient MoOx /Pt Catalyst

Valence Engineering via Manganese‐Doping on Cobalt Nitride Nanoarrays for Efficient Electrochemically Paired Glycerol Valorization and H2 Production

Synergistic Lewis and Brønsted Acid Sites Promote OH* Formation and Enhance Formate Selectivity: Towards High‐efficiency Glycerol Valorization

Heterointerface-Rich Ni3N/WO3 Hierarchical Nanoarrays for Efficient Glycerol Oxidation-Assisted Alkaline Hydrogen Evolution

Trifunctional Intermetallic PtZn‐Based Electrocatalyst for Integrated Hybrid Acid/Alkali Electrochemical Cell toward Glycerol Conversion and H2 Generation

An Anion Leaching Strategy Towards Metal Oxyhydroxides Synthesis for Electrocatalytic Oxidation of Glycerol

Value-added formate production from selective ethylene glycol oxidation based on cost-effective self-supported MOF nanosheet arrays

Design of Bi-functional Oxide Electrode for Selective Oxidative C-C Cleavage of Glycerol to Formate and Synchronized Green Hydrogen Production

Electrocatalytic and Selective Oxidation of Glycerol to Formate on 2D 3d-Metal Phosphate Nanosheets and Carbon-Negative Hydrogen Generation

Integrating Electrocatalytic Hydrogen Generation with Selective Oxidation of Glycerol to Formate over Bifunctional Nitrogen-Doped Carbon Coated Nickel-Molybdenum-nitrogen Nanowire Arrays

Molybdenum, tungsten doped cobalt phosphides as efficient catalysts for coproduction of hydrogen and formate by glycerol electrolysis