Abstract:Nucleophile oxidation reaction (NOR) is emerging as a significant approach for the sustainable production of value-added chemicals. Among the various types, electrocatalytic glycerol oxidation reaction (GOR) stands out as a crucial method for producing C-1 to C(3 )chemicals including formic acid (FA). Non-noble-metal-based (oxy)hydroxides have found extensive use in GOR, yet achieving industrially-demanded current densities (> 300 mA.cm(-2) ) at moderate potentials remains a challenge. It is well documented that GOR catalyzed by (oxy)hydroxides follows an indirect oxidation mechanism. Specifically, the nucleophile, glycerol, undergoes oxidation by the electrogenerated oxyhydroxides with electrophilic adsorption oxygen. Therefore, comprehending the evolution of the electrocatalyst in GOR is critically important. In this paper, we have developed molybdenum-doped nickel oxyhydroxides (Mo-NiOOH) through cyclic voltammetry (CV) activation of nickel molybdate (NiMoO4 ). We demonstrated that Mo species leach from NiMoO4, and the resulting Mo-NiOOH retains the nanosheet array morphology of NiMoO4. We subjected the freshly prepared Mo-NiOOH to systematic characterizations employing techniques such as scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) mapping, Raman spectroscopy, inductively coupled plasma-mass spectrometry (ICP-MS), and X-ray photoelectron spectroscopy (XPS). The above structural characterizations confirm that Mo-NiOOH inherits the nanosheet array morphology of the NiMoO4 precursor with reduced Mo content, thereby indicating the phase reconstruction from oxides to oxyhydroxides post CV activation. Furthermore, the Ni3+/Ni2+ ratio in Mo-NiOOH surpasses that in NiOOH derived from CV activation of Ni(OH)(2). Mo-NiOOH exhibits elevated electrochemically active surface areas (ECSAs) and a higher Ni3+/Ni2+ ratio compared to NiOOH obtained through CV activation of Ni(OH)(2,) facilitating the Mo-NiOOH exhibits higher ratio of Ni3+/Ni2+, higher electrochemically active surface areas (ECSAs) than NiOOH, and facilitated oxidation of Ni2+ to Ni 3+ . Consequently, Mo-NiOOH requires a lower applied potential than NiOOH (1.51 V versus 1.84 V vs . reversible hydrogen electrode (RHE)) to achieve a high current density (400 mA.cm(-2) ). Additionally, Mo-NiOOH demonstrates higher Faradaic efficiency towards formate (FEformate ) in contrast to NiOOH (84.7% versus 59.6%), indicating enhanced carbon- carbon (C & horbar;C) bond cleavage due to Mo doping. Multi-potential step (STEP) experiments indicate that GOR catalyzed by NiOOH and Mo-NiOOH follows a similar indirect oxidation mechanism mediated by oxyhydroxides. Operando electrochemical impedance spectroscopy (EIS) and in situ Raman spectroscopy confirmed that Mo doping in NiOOH accelerates GOR kinetics and the oxidation of Ni2+ to Ni3+ , contributing to the higher activity and formate selectivity of Mo-NiOOH than NiOOH. The strategy of surface modulation of oxyhydroxides through leaching of soluble anions offers guidelines for the rational design of high-performance NOR electrocatalysts.

Biphasic Transition Metal Nitride Electrode Promotes Nucleophile Oxidation Reaction for Practicable Hybrid Water Electrocatalysis

Controllable Electron Distribution Reconstruction of Spinel NiCo2O4 Boosting Glycerol Oxidation at Elevated Current Density

Heterointerface-Rich Ni3N/WO3 Hierarchical Nanoarrays for Efficient Glycerol Oxidation-Assisted Alkaline Hydrogen Evolution

Paired formate and H2 productions via efficient bifunctional Ni-Mo nitride nanowire electrocatalysts

Integrating Electrocatalytic Hydrogen Generation with Selective Oxidation of Glycerol to Formate over Bifunctional Nitrogen-Doped Carbon Coated Nickel-Molybdenum-nitrogen Nanowire Arrays

3D‐Printed Hierarchical Nanostructured N‐Co2NiO4 NF Electrode for Efficient Concurrent Electrocatalytic Production of Hydrogen and Formate

Valence Engineering via Manganese‐Doping on Cobalt Nitride Nanoarrays for Efficient Electrochemically Paired Glycerol Valorization and H2 Production

High Entropy Alloy Electrocatalytic Electrode toward Alkaline Glycerol Valorization Coupling with Acidic Hydrogen Production

Anodic glycerol oxidation to formate facilitating cathodic hydrogen evolution with earth-abundant metal oxide catalysts

Constructing multifunctional ‘Nanoplatelet-on-Nanoarray’ electrocatalyst with unprecedented activity towards novel selective organic oxidation reactions to boost hydrogen production

N-Doped Graphene-Decorated NiCo Alloy Coupled with Mesoporous NiCoMoO Nano-sheet Heterojunction for Enhanced Water Electrolysis Activity at High Current Density

Synergistic Interfacial and Doping Engineering of Heterostructured NiCo(OH)x-CoyW as an Efficient Alkaline Hydrogen Evolution Electrocatalyst

Enhanced electron penetration triggering interfacial charge redistribution in N-doped graphene-wrapped NiGd nanoparticles for coupling methanol electroreforming to H2 production

Cobalt (II) Oxide for Efficient Glycerol Electrooxidation for Formic Acid Coupled with Hydrogen Production

Metal-organic frameworks-derived oxalate ligand modified NiCo hydroxides for enhanced electrochemical glycerol oxidation reaction

Promoting biomass electrooxidation via modulating proton and oxygen anion deintercalation in hydroxide

Self-Supported FeCoNiCuP High-Entropy Alloy Nanosheet Arrays for Efficient Glycerol Oxidation and Hydrogen Evolution in Seawater Electrolyte

Design of Bi-functional Oxide Electrode for Selective Oxidative C-C Cleavage of Glycerol to Formate and Synchronized Green Hydrogen Production

An Anion Leaching Strategy Towards Metal Oxyhydroxides Synthesis for Electrocatalytic Oxidation of Glycerol

In Situ Modulation of NiFeOOH Coordination Environment for Enhanced Electrocatalytic‐Conversion of Glucose and Energy‐Efficient Hydrogen Production

Heterogeneous NiFeCoP/NF Nanorods As a Bifunctional Electrocatalyst for Efficient Water Electrolysis