Hierarchical Co,Fe-MOF-74/Co/Carbon Cloth Hybrid Electrode: Simple Construction and Enhanced Catalytic Performance in Full Water Splitting
Qingqing Zha,Mingxia Li,Zihao Liu,Yonghong Ni
DOI: https://doi.org/10.1021/acssuschemeng.0c02993
2020-07-21
Abstract:Metal–organic frameworks (MOFs) have attracted much interest in electrocatalysis as promising catalysts in recent years. However, it still remains a challenge to directly use MOF-based materials as bifunctional electrocatalysts for overall water splitting. Herein, a hierarchical Co,Fe-MOF-74/Co/carbon cloth (CC) three-layer hybrid electrode is synthesized by a simple electrochemical deposition technology with subsequent solvothermal treatment. Electrochemical performance investigations show that the as-constructed Co,Fe-MOF-74/Co/CC electrode exhibits impressive electrocatalytic activity for full water splitting, which only requires a low overpotential of 226 mA cm–2 for the oxygen evolution reaction (OER) and 94 –10 mA cm–2 for the hydrogen evolution reaction (HER), respectively. Employing the as-constructed electrode as the anode and cathode in a two-electrode setup simultaneously, only 1.65 V of the voltage is needed to deliver the current density of 20 mA cm–2. The above excellent electrochemical performances should be attributed to the specific architecture, the synergistic effect of the Co and Fe species, and the superhydrophilic surface of the catalyst. More importantly, further investigations uncover that metal hydroxides and oxyhydroxides produced in situ during electrochemical tests are the veritable active species, which promote the high catalytic activity of the present catalyst.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02993.FESEM images of the products prepared under different experimental conditions; EDS analyses, XPS survey spectrum, magnetism, and polarization curves of the final products; FESEM images and XRD patterns of the Co,Fe-MOF-74/Co/CC-2 electrode after 100 CV cycles in 1 M KOH solution for OER/HER and continuous catalyzation for 70 h at the current density of 20 mA cm–2, respectively; XPS analyses of Co 2p, Fe 2p, and O 1s before and after 100 CV cycles; CV curves of different catalysts in the voltage range of 1.207–1.307 V (vs RHE) at scan rates of 20, 25, 30, 35, and 40 mV s–1; and photographs of water electrolysis driven by a commercial AA battery of 1.5 V with the Co,Fe-MOF-74/Co/CC-2 electrode as both the anode and the cathode (PDF)This article has not yet been cited by other publications.
chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology