Abstract:Porous copper surfaces show their great merits in the applications of chemical reaction, sound absorption and heat transfer. In this study, a laser micromilling method is proposed to fabricate porous surfaces with homogeneous micro-holes and cavities of the size about 1-15 mu m on pure copper plates in a one-step process. The laser micromilling was performed by a pulsed fiber laser via the multiple-pass reciprocating scanning strategy. Based on the measurement of scanning electron microscope (SEM) and 3D laser scanning confocal microscope, the formation of surface structures was investigated together with the laser ablation mechanisms. The effects of laser processing parameters, i.e., laser fluence, scanning speed, number of scanning cycles and scanning interval, on the formation and surface morphology of porous surfaces were systematically assessed. Furthermore, the wettability of the porous copper surfaces was also evaluated by measuring the static contact angle of water. The results showed that the laser fluence played the most significant role on the formation of porous copper surfaces. The average depth and surface roughness of porous copper surfaces increased with increasing the laser fluence and number of scanning cycles while decreased with the increase in scanning interval. The scanning speed played little influence on the formation of porous copper surfaces. These results can be closely related to the variation of energy density and re-melting process during the laser micromilling process. Moreover, all the copper porous surfaces were found to be hydrophobic. The contact angle of porous copper surfaces was significantly dependent on laser fluence, but weakly affected by the scanning speed and number of scanning cycles. (C) 2017 Elsevier Inc. All rights reserved.

Effects of Laser Irradiation in High-Speed Gas Flow for Surface Treatments of Copper

Towards obtaining high-quality surfaces with nanometric finish by femtosecond laser ablation: A case study on coppers

Effect of optical properties on the thermal responses of copper films induced by ultrafast lasers

The Effect of Laser Surface Remelting on the Surface Properties of Copper

Investigation on femtosecond laser shock peening of commercially pure copper without ablative layer and confinement layer in air

Laser ablation of copper and aluminium in air

Effect of Single-Pulse Laser Irradiation Energy on Healing Fatigue Damage for Copper Film

Temporal-Spatial Measurement of Surface Morphological Evolution Time in Nanosecond Laser Irradiation on the Copper Film

Effect of Temperature Induced by Laser Irradiation Processing on Fatigue Damage Repairing for Copper Thin Film

Effect of stabilizing heat treatment on condensation heat transfer performance of laser micro-/nano-textured copper surface

Fatigue Performance by Laser Surface Heat Treatment for Copper Film

The Effect of Infrared Laser Irradiation on the Surface Morphology and Electrical Properties of Zinc Metal

Fabrication of Porous Copper Surfaces by Laser Micromilling and Their Wetting Properties

Optimization of Laser Remelting Process for Copper Surface Quality

The Investigations of Laser‐Enhanced Copper Plating on a Good Heat Conducting Copper Foil

A Study on the Electrical Conductivity and Thermal Behavior of Laser Treated Copper Joints

Study on Laser Micro Shock Effect on Electrical Resistivity of Nanometer Copper Film

The Influence of Laser Remelting Parameters on the Surface Quality of Copper

Study of Photo-Ionization and Thermal Effects on the Interaction of a Nanosecond Extreme Ultraviolet Laser with Copper

High-Efficiency Copper Removal by Nitrogen Plasma-Assisted Picosecond Laser Processing

Influence of nanoparticulates and microgrooves on the secondary electron yield and electrical resistance of laser-treated copper surfaces