Abstract:The interfacial compatibility plays an important role in the performance of fiber-reinforced composite laminates. Aramid fiber is an important class of high performances fibers. However, the inertia of fiber surface is not conducive to the improvement of composite properties. In this work, polyarylene ether nitrile terminated with phthalonitrile (PEN-t-Ph) was supplied to modify the aramid fiber (m-AF). By heat treatment and riveting PEN-tPh to the fiber surface, a rough fiber surface can be obtained, and then the composite material with improved performance can be obtained through the entangling compatibility. Through SEM images, it could be seen that the fiber surface had the best rivet surface morphology when the fiber surface coated with 5 wt% PEN-t-Ph (m(5 wt%)-AF). At the same time, the interfacial adhesion between m(5 wt%)-AF and the resin matrix showed the best peel strength of 1.594 kN/m. Based on these results, modified fiber resin composite laminates (m(5 wt%)-AF/ PEN-t-Ph) were fabricated. The results indicated that the laminates had good interfacial compatibility and the interlaminar shear strength (ILSS) of modified aramid fiber laminates was 112.58 MPa, which is increased by 21.4% than that of original fiber composite laminates. In addition, the flexural strength of m-AF/PEN-t-Ph laminates was 324 MPa, increased by 10% compared to AF/PEN-t-Ph. The results of DMA showed that the energy storage modulus of the m-AF/PEN-t-Ph laminate was greatly improved compared with that of AF/PEN-t-Ph laminate, which was increased by 60% under the initial condition of 100 C. To sum up, through surface treatment, the mechanical properties of fiber-reinforced composite laminates had been greatly improved, making them have great application prospects in bulletproof and other fields.

Constructing a new tear-resistant skin for aramid fiber to enhance composites interfacial performance based on the interfacial shear stability

Post-construction of weaving structure in aramid fiber towards improvements of its transverse properties

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Enhanced mechanical and tribological properties of Kevlar/ PTFE‐phenolic composites by improving interfacial properties by aramid nanofibers

Construction of an Interfacial Layer of Aramid Fibers Grafted with Glycidyl POSS Assisted by Heat Treatment and Evaluation of Interfacial Adhesion Properties with Epoxy Resin

A Synergistic Interfacial and Topological Strategy for Reinforcing Aramid Nanofiber Films.

Estimation of Aramid Fiber/epoxy Interfacial Properties by Fiber Bundle Tests and Multiscale Modeling Considering the Fiber Skin/core Structure

Preparation of highly active aramid fiber and effect on the interface property of aramid/epoxy composites

Enhancing the Interfacial Shear Strength and Tensile Strength of Carbon Fibers through Chemical Grafting of Chitosan and Carbon Nanotubes

Surface modification of aramid fiber by crystalline polyarylene ether nitrile sizing for improving interfacial adhesion with polyarylene ether nitrile

Improvement of interfacial strength and fatigue stability of aramid fiber/rubber composites by constructing multiscale interphase structures

Synthesis of fractal crystallized organic microspheres together with constructing full covalent bonding at the interface to strengthen and toughen aramid fiber composites

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

Surface Modification of Aramid Fibers by Amino Functionalized Silane Grafting to Improve Interfacial Property of Aramid Fibers Reinforced Composite

Latent active unit triggered crosslinking inside aramid fiber with improved transverse connection and composite properties

Interfacial studies on the surface modified aramid fiber reinforced epoxy composites

Tensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading

Characterization of fiber/matrix interfacial bonding strength of chemically grafted aramid fiber surface with epoxy resin composites

Improved interfacial shear strength in carbon fiber enhanced semi-aromatic polyamide 6T composite via in-situ polymerization on fiber surface

Enhanced Interfacial Bonding of AF/PEEK Composite Based on CNT/aramid Nanofiber Multiscale Flexible-Rigid Structure

Improving the interfacial property of CF composites through constructing multiscale interfacial nanostructures