Abstract:This paper presents a novel sol-gel method to synthesize large and thick silica aerogel monoliths at near ambient conditions using a commercial aqueous solution of colloidal silica nanoparticles as building blocks. To achieve slabs with high visible transmittance and low thermal conductivity, the method combines the strategies of (i) synthesizing gels on an omniphobic perfluorocarbon liquid substrate, (ii) aging at temperatures above room temperature, and (iii) performing solvent exchange with a low-surface-tension organic solvent prior to ambient drying. The omniphobic liquid substrates were used to prevent cracking and ensure an optically-smooth surface, while nanoparticle building blocks were small (<10 nm) to limit volumetric light scattering. Gels were aged at temperatures between 25 and 80 °C for up to 21 days to make them stronger and stiffer and to reduce shrinkage and cracking during ambient drying. Ambient drying was achieved by first exchanging water in the gel pores for octane, followed by drying in an octane-rich atmosphere to decrease capillary forces. The synthesized nanoparticle-based silica aerogel monoliths had thicknesses up to 5 mm, diameters up to 10 cm, porosities exceeding 80%, and thermal conductivities as low as 0.08 W m-1 K-1. Notably, the slabs featured visible transmittance exceeding 75% even for slabs as thick as 5 mm. The as-synthesized aerogel monoliths were exposed to TMCS vapor to induce hydrophobic properties resulting in a water contact angle of 140° that prevented water infiltration into the pores and protected the aerogels from water damage. This simple synthesis route conducted at near ambient conditions produces hydrophobic aerogel monoliths with promising optically transparent and thermally insulating properties that can be adhered to glass panes for window insulation and solar-thermal energy conversion applications.

Progress in development of silica aerogel for particle- and nuclear-physics experiments at J-PARC

Recent progress in silica aerogel Cherenkov radiator

Large-area silica aerogel for use as Cherenkov radiators with high refractive index, developed by supercritical carbon dioxide drying

Transparent tiles of silica aerogels for high-energy physics

Development of transparent silica aerogel over a wide range of densities

Developing a silica aerogel radiator for the HELIX ring-imaging Cherenkov system

Inhibited Radiation Transmittance and Enhanced Thermal Stability of Silica Aerogels under Very-High Temperature

Performance of new silica aerogels in a threshold Cerenkov counter

A Cherenkov Radiation Detector With High Density Aerogels

Dependence of the refractive index of transparent ZrO2–SiO2 aerogels on the density and zirconium content

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

Analysis and measurement of optical properties and time characterization of silica aerogel used as a Cherenkov radiator

Ultralight, thermal insulating, and high-temperature-resistant mullite-based nanofibrous aerogels

Measurement of Radiation Damage on Silica Aerogel \v Cerenkov Radiator

Optimization of muonium yield in perforated silica aerogel

Transparent silica aerogel slabs synthesized from nanoparticle colloidal suspensions at near ambient conditions on omniphobic liquid substrates

Radiative Properties of Non-Spherical Opacifiers Doped in Silica Aerogels for High-Temperature Thermal Insulation

Research progress and applications of silica-based aerogels – a bibliometric analysis

Tuning the Degree of Protonation to Prepare Ultra-light and High Thermal Insulation Mullite Nanofiber Aerogels

Design and Optimization of Core/shell Structures As Highly Efficient Opacifiers for Silica Aerogels As High-Temperature Thermal Insulation

Toward Improved Optical Transparency of Silica Nanofibrous Aerogels