Abstract:This paper presents a novel sol-gel method to synthesize large and thick silica aerogel monoliths at near ambient conditions using a commercial aqueous solution of colloidal silica nanoparticles as building blocks. To achieve slabs with high visible transmittance and low thermal conductivity, the method combines the strategies of (i) synthesizing gels on an omniphobic perfluorocarbon liquid substrate, (ii) aging at temperatures above room temperature, and (iii) performing solvent exchange with a low-surface-tension organic solvent prior to ambient drying. The omniphobic liquid substrates were used to prevent cracking and ensure an optically-smooth surface, while nanoparticle building blocks were small (<10 nm) to limit volumetric light scattering. Gels were aged at temperatures between 25 and 80 °C for up to 21 days to make them stronger and stiffer and to reduce shrinkage and cracking during ambient drying. Ambient drying was achieved by first exchanging water in the gel pores for octane, followed by drying in an octane-rich atmosphere to decrease capillary forces. The synthesized nanoparticle-based silica aerogel monoliths had thicknesses up to 5 mm, diameters up to 10 cm, porosities exceeding 80%, and thermal conductivities as low as 0.08 W m-1 K-1. Notably, the slabs featured visible transmittance exceeding 75% even for slabs as thick as 5 mm. The as-synthesized aerogel monoliths were exposed to TMCS vapor to induce hydrophobic properties resulting in a water contact angle of 140° that prevented water infiltration into the pores and protected the aerogels from water damage. This simple synthesis route conducted at near ambient conditions produces hydrophobic aerogel monoliths with promising optically transparent and thermally insulating properties that can be adhered to glass panes for window insulation and solar-thermal energy conversion applications.

Performance of new silica aerogels in a threshold Cerenkov counter

Transparent tiles of silica aerogels for high-energy physics

Measurement of Radiation Damage on Silica Aerogel \v Cerenkov Radiator

Large-area silica aerogel for use as Cherenkov radiators with high refractive index, developed by supercritical carbon dioxide drying

Recent progress in silica aerogel Cherenkov radiator

A Cherenkov Radiation Detector With High Density Aerogels

Development of transparent silica aerogel over a wide range of densities

Progress in development of silica aerogel for particle- and nuclear-physics experiments at J-PARC

Developing a silica aerogel radiator for the HELIX ring-imaging Cherenkov system

Enabling Highly Efficient Solar Thermal Generation with 800°C-Stable Transparent Refractory Aerogels

Dependence of the refractive index of transparent ZrO2–SiO2 aerogels on the density and zirconium content

Analysis and measurement of optical properties and time characterization of silica aerogel used as a Cherenkov radiator

Optically Transparent Thermally Insulating Silica Aerogels for Solar Thermal Insulation

Transparent silica aerogel slabs synthesized from nanoparticle colloidal suspensions at near ambient conditions on omniphobic liquid substrates

Determination of Scattering and Absorption Coefficients of Porous Silica Aerogel Composites

Aerogel Defect Detection Using Terahertz Waves

Density effects of silica aerogel insulation on the performance of a graphite probe calorimeter

Carbon dots' unusual optoelectronic properties in silica aerogels

Aerogel Cherenkov Detector for Characterizing the Intense Flash X-Ray Source, Cygnus, Spectrum.

Transparent thermal insulation ceramic aerogel materials for solar thermal conversion

Transparent Silica Aerogels: Optical and Chemical Design, Controlled Synthesis, and Emerging Applications