Abstract:Enhancement of thermal stability in Al-Ni alloys through microalloying with slow-diffusing elements, specifically Zr, has been previously reported which is attributed to Zr segregation at the Al/Al 3 Ni interface. In this study, we explore the influence of microalloying Al-Ni alloys with Zr, Ti, V, and Fe on microstructural evolution, hardness, and electrical and thermal conductivity across a range of heat-treatment temperatures from 300 to 450 °C. The distribution of microalloying elements and precipitates after heat treatment is characterized using atom probe tomography (APT). Our investigation confirms Zr segregation to the Al/Al 3 Ni interface, while similar interfacial segregation is absent with the addition of Ti, V, and Fe. Additionally, our analysis of the Al 3 Ni microfiber morphology reveals that their coarsening and spheroidization rates are similar with and without interfacial segregation; thus, retaining the fiber reinforcement through interfacial segregation of slow diffusing elements may not be an effective strategy. Precipitation of L1 2 nanoparticles was found to be the dominant mechanism affecting enhanced hardness and electrical conductivity in Al-Ni-Zr alloys, attributed to precipitation strengthening and solute depletion, respectively. Similar precipitation was not observed for additions of Ti, V, and Fe following heat treatment. We provide a thermodynamic explanation for this limitation. The findings of this study suggest that an effective approach for designing Al-Ni alloys should involve prioritizing microalloying elements to maximize L1 2 precipitation and minimize solute content in the FCC-Al matrix post heat treatment, rather than focusing on Al/Al 3 Ni interfacial segregation.

Effect of dopants on thermal stability and self-diffusion in iron nitride thin films

Formation of iron nitride thin films with Al and Ti additives

Study of magnetic iron nitride thin films deposited by high power impulse magnetron sputtering

Effects of Ti Doping on the Structures and Magnetic Properties of Films

Effects of Ti on N Distribution and Diffusion in FeTiN Thin Films

Growth, structural, and magnetic properties of iron nitride thin films deposited by dc magnetron sputtering

Effects of Thermal Diffusing DyZn Alloy Film on Magnetic Properties and Heat Resistance of Sintered NdFeB Magnets

Effects of N doping on mechanical properties of Fe and interlayer adhesion of Fe with Cr, Ti, and Si: A spin-polarized density functional theory study

Effect Of Nitridation On Magnetic Properties Of Fe53pt47 Thin Film

Effect of different metallic doping elements on the physical properties of iron oxide thin films

Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys

Fe and N self-diffusion in non-magnetic Fe:N

Analysis of active screen low temperature plasma-assisted deposition of iron nitride thin films on silicon (100) substrate

Effect of the Degree of Aluminum Doping on the Mechanical and Tribological Characteristics of Titanium–Aluminum Nitride Films

Effect of AlN nanoparticle doping on thermophysical properties of nitrate via mechanical milling: Experimental studies and microscopic mechanisms

Thermal Stability Enhancement of Hybrid Ni2al3/Ni Coatings on Creep Resistant Ferritic Steels by A Mechanism of Thermodynamically Constrained Interdiffusion

Thermal Stability of Electrical and Magnetic Properties of a Nanocrystalline Hf-Ni Alloy

The effect of N+-implanted aluminum substrate on the mechanical properties of TiN films

The Influence of Columnar Microstructure on Diffusion Reaction Between Ti Thin Films and Aluminum Nitride Ceramics

Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films

Influence of Nitrogenizing and Al-doping on Microstructures and Thermoelectric Properties of Iron Disilicide Materials